Changing Hydraulic Filters On An Excavator - STEP BY STEP

Join the TekamoHD Network: www.tekamohd.c...
0:00 INTRO
0:21 VENT THE HYDRAULIC TANK
1:46 REMOVE FILTER COVER
2:35 INSPECTING THE SUCTION SCREEN
3:10 REMOVING THE CAP TO THE HYDRAULIC RETURN FILTER
4:07 REMOVING THE SNAP RING
4:37 REMOVING THE HYDRAULIC RETURN FILTER
4:54 RE-INSTALLING THE NEW FILTER
6:18 RE-INSTALL THE SNAP RING
6:30 RE-INSTALL THE COVERS
8:03 REMOVE THE OLD HYDRAULIC OIL FILTER
9:45 CHANGING THE CASE DRAIN FILTER
11:50 RE-INSTALLING THE PILOT FILTER
This video shows how to change the hydraulic filters on an excavator, CAT 314E. This is a generic maintenance procedure that can be used for most other excavator makes and models as well, such as John Deere, Komatsu, Hitachi, and Volvo. Always remember to vent the hydraulic tank first to avoid a pressurized oil spill, and consult your manufacturer specs to make sure you purchase the correct filter sizes.
Contact TekamoHD for full service & repair of your heavy equipment. We offer mechanical services, emergency equipment repair, rental replacements, tech tools, GPS systems, machine operators, and maintenance plans. Our goal is to maximize the productivity of your heavy equipment fleet to give your business a competitive edge.
Special thanks to our partners at Rent1 Equipment Rentals for lending us the CAT 314E excavator, and SmartCast Equipment for allowing us to film in their equipment yard. Check out links to their websites below.
Learn how to do a final drive oil service in our next video: • FULL FINAL DRIVE SERVI...
** DRIP MARKETING ** This awesome video was proudly produced by them! www.dripmarket...
TekamoHD:
www.tekamohd.com/
Rent1:
www.rent1.ca/
FortisHD:
www.fortisHD.com/
SmartCast Equipment:
www.smartcaste...
-
Any information on heavy equipment operation available at this channel is intended for general guidance only and must never be considered a substitute for advice provided by qualified heavy equipment instructor.
Any reliance you place on such information is strictly at your own risk. If you intend to operate heavy equipment, always ensure you meet the legal permitting requirements based on your geographic location.
Ensure you are wearing the proper personal protective equipment suited for your procedure such as steel toe boots, safety glasses, hard hat, gloves, overalls and any other equipment suited for your task at hand.

[@TekamoHD]

DO OUR VIDEOS HELP? SUPPORT THE CHANNEL and help us make more content! Buy rubber tracks, heavy duty tooling, and undercarriage parts at tinyurl.com/Support-TekamoHD

[@DB-oz2ki]

I like your videos, however on this one, one thing got me. Remove the cap to the tank to remove any pressure, then put it back on. You left it off moving bolts over it, dropping a bolt into the tank could happen.

[@leobhangu]

Instead of taking the snap ring off , he should've rotate the filter 180° and remove the whole canister out. That way you are not releasing any dirt out. That's the right way.

[@ADITYASHARMAACADEMY]

kzbin.info/www/bejne/d2fRoKetasurfck

[@jondoherty3678]

You have to take the snap ring off then turn 180 degrees

[@Resleeved]

Need to rotate the whole cannister 180 degrees, then remove the entire cannister and THEN change the filter and drain the dirty oil. Doing it this way keeps all the dirty oil in the tank.

[@jaichandkamboj3463]

Your work is good

[@heavymachinery2843]

I like to put bolts in plastic boxes or magnetic trays when i work on heavy equipment good work 👍

[@TekamoHD]

Thanks for watching! Let us know if there's any video you'd like us to make.

[@emichaelschmidt]

@@TekamoHD EGR/SCR delete!

[@nrxhavoc]

chromes on an impact this guy is a savage

[@jesegarcia8902]

Don't let snap one see it lol

[@ramosel]

That's not the correct way to change the Hydraulic filter. You just dumped dirty oil into the tank line. There are directions on that handle on how to do it right.

[@amathonn]

Am I the only guy that sees a klutz like me dropping one of those bolts and watching it bounce into the hydraulic tank?

[@ADITYASHARMAACADEMY]

kzbin.info/www/bejne/d2fRoKetasurfck

[@omerkhalil7065]

Very informativ vedios thanks for sharing this type of knowledg

[@yunianisa8134]

Trimakasih mister. Salam dari indonesia

[@jaichandkamboj3463]

You're work like it

[@SunilSingh-xw2hg]

Good video im glad i found this❤❤

[@martinkoche4375]

Thank you

[@nelsonsantos770]

oil from the filter still looks so clean though!

[@HarleyMothersole]

What snap on drill is he using?

[@maxpower9631]

thanks Keith, have old Deere excavator....this will help !

[@TekamoHD]

you're welcome, glad it helped

[@reelMn]

H thanks for the video. My Hitachi UH061 has a strange round smaller cap on the top of the suction filter - feels like rubber - it’s under the fluid level. I haven’t figured out how to remove it. Any ideas?

[@bernhordredecop2319]

Does it help to change the return filter for the hydraulic oil getting hot?

[@leobardosantos259]

How to replace hydraulic filter on 2007 304E CR ?

[@makimohamed1307]

شكرا شكرا

[@behelpful1435]

At 2:54, what do you mean be seal pieces?

[@martinbernal5693]

Loosen the cap, don’t remove it. Don’t want to accidentally drop a bolt down there. Ask me how I know about that.

[@operatormudascebeh4071]

Perfect

[@TekamoHD]

Glad you think so. Let us know if there's any other video we can create to help.

[@gokulratheesh7399]

Which country you are working

[@jagannathmahapatra8057]

After how much hours we change hydraulic filters?

[@Senkino5o]

Work it out bud.

[@ADITYASHARMAACADEMY]

kzbin.info/www/bejne/d2fRoKetasurfck

[@ADITYASHARMAACADEMY]

kzbin.info/www/bejne/d2fRoKetasurfck

[@neilgordo4654]

What is the make of the Impact wrench

[@esteban_alonso]

Snap-on

[@mdrajan1019]

Hi sir. 1st thnx. Ur video is very useful. But 1 time u did mistake. U r open hydrolic tank cover. Remove gas but u not fix cover and remove bolt. Any bolt slip ur hand and drop in tank after to much prblm.

[@ADITYASHARMAACADEMY]

kzbin.info/www/bejne/d2fRoKetasurfck

[@tomasgilboy5362]

Dose it mater the level of the hydraulic oil tank wants it above the Minimum mark or can you put to puck oil in

[@DontFuckWithMexicans]

Great video! its helping get me through my foundations!

[@TekamoHD]

Glad we could help you get through your foundations! Let us know if there are certain topics you would like us to cover.

[@user-in1zq4im9b]

Фильтр гидрораспр

[@kristiheitz3022]

Do you know how to drain the hydraulic oil on a 938M wheel loader?

[@erwinvandenhoven1198]

Machine manual

[@westernstar4964]

Open one of the side access doors. A tube will be routed there from the tank

[@RAVINDRAKUL]

Hi wants to join your team.

[@SteveXNYC]

A filter with no sump is a waste.

[@jaybell9145]

U shud have changed new gloves when u held the new filters.dirt already clinged to ur gloves and will stick into new filter.

[@ADITYASHARMAACADEMY]

kzbin.info/www/bejne/d2fRoKetasurfck

[@mdrajan1019]

Sorry if you felt hurt

[@ADITYASHARMAACADEMY]

kzbin.info/www/bejne/d2fRoKetasurfck