Changing your spark plugs. Please Share,Subscribe and give us a thumbs up.
Пікірлер: 129
@judyh7221 Жыл бұрын
Thank you so much for your videos!!! I’m a bit “older” but still enjoy riding and my husband always took care of our Goldwing. Your videos have been a lifesaver!!! Thank you so much!!!!!
@7863348 Жыл бұрын
Thank you Judy for watching. Like you I very much like riding but I’m so busy I haven’t been out this summer. To many irons in the fire lol. I appreciate your kind comments. Have a great weekend, ride safe and God bless. Cheers……..Paul
@robertfrostl5 ай бұрын
Oh my God!!! I was finding your videos and couldn’t find them. Thank God the Algortihm threw me here back again!! Its always a healthy feeling watching your workshop
@78633485 ай бұрын
Thank you Robert. Glad you found us again. Hope you’re doing well. Happy Easter.
@zachmillwood3 жыл бұрын
Very cool videos! I'm stoked to get my own GL1800 at some point. A note: dielectric grease is excellent at insulating - it's perfect for keeping water and junk out of electrical junctions. It's great at stopping the flow of electrons - it's an insulator. Using it on the spark plug boots/ribs (i.e. NOT on the terminal, where electricity needs to flow to the electrode) will help them separate in the future - this is recommended by many makers and technicians. However... Unfortunately, the threads of the spark plug are in the direct current path for ground on the plugs - impeding electrical flow can cause problems from poor performance to engine damage. Anti-sieze would be better. HOWEVER, any lubricant can lead to over-torquing, which can lead to stripping threads on the soft aluminum blocks. Use on the threads at your peril - NGK recommends against lube on the threads, for one.
@BigFiveJack2 жыл бұрын
I appreciate your knowledge, and I admire your ability to squat as steadily as you do!
@cmarkchappelle71172 жыл бұрын
Just one concern here. NGK presently recommends installing their plugs dry as any applied lubricant can allow the plug to be over torqued by as much as 20%. Not a good thing with aluminum heads. NGK goes on to day the plugs are coated to prevent seizing. Other than this, I generally find your videos to be quite helpful!
@78633482 жыл бұрын
Being a retired GM and Honda tech and living it a very corrosive environment on a rock out in the middle of the North Atlantic (Newfoundland) this is the way we do it. If you don’t do it this way here those plugs will not come out if installed dry. Do what ever your comfortable with. This way has worked for all our vehicle and motorcycle customers for the last 30 years. Thanks for watching.
@willtopower21586 жыл бұрын
Just bought a GL1800, 2005 today with 33,000 miles. Looking forward to learning about it, your videos are terrific!! Jerry in Florida, USA
@chrishelms19675 жыл бұрын
Great to see im not the only one who has the lift but works on the ground.....
@333alliedeagle6 жыл бұрын
Thanks for all the info.I am getting my first Goldwing on 04/07 18 used 2002 model 63,000 miles..GOD Bless you both..Robert in Mississippi.
@78633486 жыл бұрын
Great bike Robert. You’ll never get the smile off your face after you ride that beast. If you have any questions just ask. Thanks for watching. Ride safe bud.
@bryanwalker70318 жыл бұрын
Guardian bells work like a charm (pun intended). I've got my story and I'm sure many others have theirs. Great video by the way.
@78633488 жыл бұрын
Thanks Bryan. There's many versions of the story on the bell for sure. There's another one I like that stats the bell is put on a bike so that when it rings it reminds us of our fallen riders.
@bryanwalker70318 жыл бұрын
I've heard that version as well. I miss my bike but there's no one of my vintage to ride with anymore in combination with obligations to my father, family and dog (and many days I prefer that in reverse order of precedence). ;-)
@78633488 жыл бұрын
I don't know if I could not have a bike. Even the short ride I took to do this video felt so good but I know life can get complicated at times. Hope all is well.
@VK-zt6sw2 жыл бұрын
Very nice! Thank you!
@chrismaggio78794 жыл бұрын
Thanks, that was easy and clear... and as usual you two are funny together. I just wish the airlifted replacement was this easy!
@RustyGlovebox8 жыл бұрын
I never saw the plugs on a Goldwing, Nice work using the torque wrench and dielectric grease on the boots.
@78633488 жыл бұрын
Thanks.
@knightingalesaid7 жыл бұрын
I love your videos. Thanks so much for the tutorial. You are blessed to have such a wonderful wife.
@colingoldthorpe59185 жыл бұрын
Great video Paul and Kathy, I have to take the whole bike apart to get to my sparkplugs on the Triumph Trophy, I Drop it off at the dealers for this type of work, because I have zero patience. Hello from your neighbors in Alberta, safe riding this season :-)
@78633485 жыл бұрын
Well the wings air filter is about the same to change as your plugs lol. Only do what your comfortable doing bud. Thanks for watching and stay safe over there. Happy Canada Day. Ride safe.
@smithjeffreyprojects4 жыл бұрын
I’ve always heard the term road gremlins but either way we’re covered. Great video. Much appreciated!! Ride safe!!
@78633484 жыл бұрын
I’ve heard them called road gremlins and road demon’s. Either way I’ve never seen one with the bell on lol. Thanks for watching and ride safe.
@bradleyturner35205 жыл бұрын
I think your videos are awesome and very helpful keep up the good work folks maybe meet you guys on the road some time. Goldwings are awesome
@PAULMEYERSNorthBay8 жыл бұрын
Great video - Got my "bell" from a good buddy "Paul Short". Installed and ready to ride. Thanks Paul for all you do!
@78633488 жыл бұрын
Your welcome my friend. You won't see any Road demons with that bell. Thanks for watching.
@78em8 жыл бұрын
Hi Paul, thanks for a great video, I have a very old tube Die-electric grease that will be used much more often, thanks for the tip, and maybe I will even buy a new tube, Take care.
@78633488 жыл бұрын
It's great stuff. I use it all the time.
@klouism18 жыл бұрын
Great Video. You always explain things so well and you add common sense ways to improve the job! Thanks to you and the "wifey".
@78633488 жыл бұрын
Thank YOU for watching. Much appreciated. Ride safe.
@majorhah83096 жыл бұрын
I learn so much from your videos. Thanks.
@garyjohansen85138 жыл бұрын
Just a short comment about your road demon bell. I think that may be a carryover from the Harley days - where they are necessary (to protect you from parts that fall off the Harleys and bounce up from the road to bite you) and unnoticed (anyone who rides a Harley would never notice that little bell ringing - even after the bike was shutdown).. However with the Goldwing the bouncing parts are unheard of, and that constant little ringing bell was driving me nuts. I had to remove mine.. Thanx for the video and specs.
@78633488 жыл бұрын
Well that's a story I haven't heard before lol but I have to admit that I like Harley's too. Some of my good friends ride Harley's and are great people. Ive never seen a motorcycle that I haven't liked. Ride safe.
@markbarrett4482 Жыл бұрын
Super helpful! Thanks so much!
@7863348 Жыл бұрын
You're so welcome!
@nafisavalikarimwala80073 жыл бұрын
easy Thanks for Tutorial
@78633483 жыл бұрын
Thank you for watching. Ride safe.
@mikepike85692 жыл бұрын
I love those highway pegs
@ReyDiaz Жыл бұрын
Greetings and thanks for the tutorial....the top cover is also simply unscrewing and screwing the same as the one below? I have to change both, it has deteriorated over the years
@Garage66Goldwing5 жыл бұрын
Thank you Paul, excellent, good reviews.
@n7hevn7 жыл бұрын
Thanks for sharing this tutorial!
@78633487 жыл бұрын
Kindly welcome. Ride safe.
@caryhubbardfamilychannel75168 жыл бұрын
Great vid guys. Thanks for sharing. Stay safe guys
@weebercorey5 ай бұрын
Thanks for the video. Curious why you didn't gap to say ~0.040, since 0.043 was the very outside range of within spec.
@78633485 ай бұрын
I was a Honda tech for many years and I always go by the manufacturer’s specs of the brand parts specs. That said this video was produced 7 years ago and I really can’t remember what I did 7 days ago so who knows lol. Thanks for watching. Ride safe.
@Safezone24 жыл бұрын
I just bought a 2009 and have yet to change the spark plugs and oil.. :)
@gregc72346 жыл бұрын
Another great video.
@Vader19578 жыл бұрын
We call them gremlin bells. Got to have them.
@scubarider13 жыл бұрын
I definitely enjoy watching your videos. I was trying to do my plugs but the 18 mm deep socket I have would not fit in the hole where the plug is. It’s a six point socket. I’m assuming I need an 18 mm thin walled Socket. Are the 12 point sockets generally thinner than the six point?
@paulspencer5044 Жыл бұрын
Great video, thanks. I have a 13, F6B, Cobra 626 exhaust, torgue loopz, cat delete. Midwest riding, not high speed. Would you stay with stock, std plugs?
@TechStories798 жыл бұрын
Paul, as you know I have a new truck now 12mnths old and I just found out I cannot buy a full workshop manual for it! I rang the dealer first who put me on to haynes books who do all the manuals her in Australia and they don't have one. Apparently Nissan keep all their workshop manuals on their mainframe computer as a pdf that all dealers use. I have servicing coming up and won't know torque values etc oh man.
@tommycoogan227 жыл бұрын
Paul do you do complete DVD I live in the UK and teach motorcycle and car engineering I have a gl 1500 and I find your demo very interesting
@goldwingman15007 жыл бұрын
We call the Hex key an Allan Key its funny on how much we are the same but Different i get mine done by my Mechanic .as he checks the whole bike out as well.cheers .How do you work with Gloves on i hate working with them on . I have my Bell on been safe all these years .
@gregc72346 жыл бұрын
great video. Did you ever do valve adjustment?
@manuelluissousajesus29863 жыл бұрын
good I'm new on this bike you can tell me where is the fi a plug of obd2 thank you. Goldwing2002
@mshippe617 жыл бұрын
Beautiful Bike..
@78633487 жыл бұрын
Thank you very much.
@stevenlongtin74742 жыл бұрын
Great video. What's a good repair manual good a 2001 Gl 1800 ABS?
@78633482 жыл бұрын
The OEM Honda manual. Get it at your Honda dealer.
@apm69972 жыл бұрын
How do you know WHEN you should change the spark plugs?
@mischef188 жыл бұрын
Nice vid again guys oh and Luc. atb
@78633488 жыл бұрын
Thanks Ken.
@briha3142 Жыл бұрын
Have you ever opened up the transmission of the GL1800? My ‘07 GL1800 has recently lost 5th gear, and my local Honda Dealership refuses to work on ANY Honda over 10 years old, and the Honda Powersports Company only tells me to locate my local dealership, which is futile, since there is only the ONE local Honda Dealership on my island, in Hawaii, who is refusing to work on my bike! I have the Service Manual, but it is not as exhaustive as I would’ve liked, in order to attempt a transmission repair!
@7863348 Жыл бұрын
Sorry to hear about your issues. I’ve seen transmission issues in the past that were mostly caused by running boards with heel/toe lever and putting to much force on the inner shift forks. That said, it is a very detailed repair and requires a week in labour, a very good technician and deep pockets. I’m on an island as well (Newfoundland) and I highly doubt any of the dealers here would tackle it. I worked at the dealership level in the past and I’d do my own if I had to but it would take me months doing it because of my work schedule. There has to be someone there that could do it, you just need to find them.
@lornethornhill8452 Жыл бұрын
I actually have a question about spark plugs. I was driving a 2011 ford 350 cube van 250k (ish) original plugs could one of the plugs blow out of the engine just because of too high acceleration ( Heavy Foot) or was it bound to happen anyways. And Also could having only 4 or 6 of 10 spark plugs replaced have anything to do with a plug popping
@7863348 Жыл бұрын
I’ve seen spark plugs rust out to the point where the outer casing corroded so bad it blowed out the the plugs ceramic and all was left in the head was the threaded portion and I used a little heat and a bolt extraction tool to remove it. I’ve also seen plugs blowed out that was caused by defected threads in the head and I repaired it via helicoil insert. One time I seen one blow out simply because the installer didn’t install them tight enough.
@HalfassDIY4 жыл бұрын
Thanks !
@78633484 жыл бұрын
Welcome!
@raygald6 жыл бұрын
What's about NGK Iridium tipped plugs? Do they have a better lifetime than original one, that must be changed every 16 K miles? A good idea to use a rubber hose to begin the screwing of plugs and avoid crosstreading them; I do it since a have motorcycles.
@-C.T.-5 жыл бұрын
I'd also like to know. I have purchased Iridium's before for other bikes and they are definitely more expensive. Are they worth the cost for any bike and, in this case, especially the Wing?
@TrungTheMaker5 жыл бұрын
could you tell me how tall the engine is? id like to know because I want to use the gl1800 in my honda acty van! and I need a lower profile engine to do so.
@gopha5338 жыл бұрын
learned a few things there. Onya.
@jimduffenais39968 жыл бұрын
Paul..do you have a video changing the plugs on a gl 1500? Im wondering if the engine guard needs to come off or we just wiggle around behind it?
@78633488 жыл бұрын
Jim there's a little bit more involved with the GL1500 but it's not a bad job. Here's a link that will get you though it. Hope this helps......Paul www.goldwingfacts.com/forums/2-goldwing-technical-forum/605569-spark-plugs.html
@DavidSmith-vp3dn7 жыл бұрын
Hi Paul & Kathy! Have you ever taken the valve covers off? A recent purchase of a 2004 GL1800A (my second GL1800A, ), I swear the previous owner must have lived under the sea (don't know him, purchased at a dealer who got the bike in an auction) . Every nut & bolt is either rusted or crusty! Also most all exposed aluminum filthy & pitted (previous owner obviously never cleaned the bike), I put a new rear wheel and aluminum polish w polishing cone of front wheel. My next step is to replace the valve covers - have you had these off before? I see some on eBay from China but I will probably bite the bullet and get a set from Honda.
@78633487 жыл бұрын
I've had many off and never seen that. I suspect you might have yourself a flood bike. One that's been under water for awhile then all the fluids were changed but the corrosion remained. I live in a very moisture filled area and have never seen what you have described. You might want to check the rear def oil and see if there's any signs of that crap in there. The fluid should be clear and not milky looking.
@DavidSmith-vp3dn7 жыл бұрын
Paul & Kathy Short Texas won't let a dealership sell a flood title, unless the owner never tried to make an insurance claim. It looks like it just was never cleaned. Brake dust and road grime like I have never seen before. Honda shows both previous owners are in Texas, and I am close enough to the coast for salt. Unlike what I dealt with in Chicago with my last GL1800 and the road salt. I have cleaned and replaced most chrome and chromed plastic parts, and buffed out the shocks & front end. The valve covers are next, but I want to replace them rather than buffing.
@DavidSmith-vp3dn7 жыл бұрын
Paul & Kathy Short I changed oil & filter (always fresh crush washer) - no signs of water and correct amount was drained. Changed all brake & clutch fluid by dealer while performing brake recall - previous service did NOT understand what the sight glass was for: filled to the brim. Fresh Honda brakes all the way around also. New bottle of 80W90 Hypoid oil and a turkey baster for a rear end change is standing by.
@DavidSmith-vp3dn7 жыл бұрын
Paul & Kathy Short And need to change the air filter too. I put a new set of tires on - but the dealer put stick-on wheel weights on! After spending all that time buffing and polishing the wheels - grrr!
@78633487 жыл бұрын
Personally I prefer stick on weights. The hammer on ones can damage the rim. My advice to anyone owning anything is to obtain a service manual on the machine. It will pay for itself on the first repair.
@James.984haid7 ай бұрын
Hi. Can i aske you where you got the highway pegs?
@78633486 ай бұрын
Sure. Bought them at the Honda dealer. They are made by Kuryakyn. Ride safe 👍
@loshonorables61653 жыл бұрын
Hey guys what state are you in? Do you service other peoples Goldwings? Or just your own?
@jimberger73625 жыл бұрын
Paul , how many miles are you changing your plugs at? I have the same year and color as you ! I still have the original plugs in mine at 21,000 miles.
@78633485 жыл бұрын
I changed mine at around that interval. They are easy to change, not expensive so I did it for the peace of mind aspect of it. Ride safe.
@chasebryan11862 жыл бұрын
where can i get a copy of that manual!?!?
@78633482 жыл бұрын
I bought mine at the Honda dealership.
@jensmandanici35244 жыл бұрын
how about re gapping and cleaning old plugs , ???
@78633484 жыл бұрын
Sure you could but I like to put in a fresh set and go riding 👍
@fernandorivera6904 Жыл бұрын
Hello I really follow you on your channel my question is if you can help me How to connet the lights color yellow that are above the parte where the spark plugs. thanks i await your response my name is Fernando Rivera
@opichocal4 жыл бұрын
I bought a kit from Amazon and they sent the cold-weather plugs. I live in Dallas and it’s 100° do you think it affect the mileage/performance?
@78633484 жыл бұрын
If it’s not cold there then you have your answer. Don’t use them .
@vanceknutson97943 жыл бұрын
Why are you not ohming the plugs to see if they are bad out of the box?
@78633483 жыл бұрын
You silly silly boy. 🤨
@user-cv3le7ll1d5 жыл бұрын
I have a problem with bike goldwing model 2004 size 1800 fi what a problem if please
@78633485 жыл бұрын
You need to retrieve the trouble code first. Having the trouble code will point you to the trouble area. Please check out this link for more info. goldwingdocs.com/forum/viewtopic.php?t=4239
@robcraft13735 жыл бұрын
How often do you change the plugs?
@78633485 жыл бұрын
I’d wait for at least 30K before changing but mother Honda says sooner which is a total waste of money. I changed mine closer to 40 K an the ones I removed were in perfect shape. Ride safe.
@jamesrenfro7994 жыл бұрын
Would you not put anti seize compound on the threads.
@78633484 жыл бұрын
Here’s someth8ng for you to read on the topic 👍 agradetools.com/be-confident-with-anti-seize-how-to-use-the-right-anti-seize-like-a-boss/
@user-cv3le7ll1d5 жыл бұрын
مشكله في تاشير كلوب FI عند القياده
@78633485 жыл бұрын
Try Google translate
@12345NoNamesLeft8 жыл бұрын
2:45 You've got a whole passel of battery powered impacts and screwdrivers and such, why use a speed wrench crank to remove?
@78633488 жыл бұрын
Because I want to show that I still like to use everyday tools that most people own.
@denniscoyle47438 жыл бұрын
Or "KISS" Keep It Simple Stupid. I know, I know, I'm not suppose to call people stupid. I'm a Manager/Maintenance person in a mobile home park in Los Angeles, Ca. My shop has all my battery operated tools and my maintenance truck has all my hand tools. It's a lot easier stuffing your pockets with hand tools than it is carry a battery operated drill/screw drive with extra batteries. Thanks Paul for another great video. Dennis
@78633488 жыл бұрын
Exactly. I still like the feel of hand tools too. Battery operated stuff can apply to much torque to small bolts running the threads as well. I still enjoy using the hand tools. Nice to know you do too.
@89nissancrawler8 жыл бұрын
With threads in (I'm assuming) aluminum, a hand tool can save you from ripping out threads on seized hardware, especially hardware that small. A power tool would have the threads gone before you even knew it was seized. Sometimes slower is faster.
@12345NoNamesLeft8 жыл бұрын
I like speed cranks, but in this day of flat rate billing it doesn't seem to be the normal.
@ramosel8 жыл бұрын
Ok, gotta ask. 1800cc... What's the HP rating on the GoldWing?
@78633488 жыл бұрын
118 hp.
@ramosel8 жыл бұрын
Guess I'm spoiled by the Aprilia. I expected more.
@78633488 жыл бұрын
These wings pull like a train even pulling a trailer. Some countries use them for tow trucks. I'd get another tomorrow if I needed another bike.
@ramosel8 жыл бұрын
+Paul Short I'm just used to something with half the displacement, a 1/3 the cylinders, a whole lot more power and under 400lbs. Pulls like a train, no. Pulls like the space shuttle.
@78633488 жыл бұрын
Differant bikes for differant a style of riding. Not even close in comparison. Kathy would not enjoy being on the back of yours. A trip to Costco which is an hour away would mean little room to bring things back. We like the quiet sound of ours and the stereo. We have abs, fuel injection, reverse and cruise. We have an internal head set for talking to each other. My back wouldn't take 15 minutes riding on yours leaned over. Ours can travel twice as fast as the noted speed limit on the highway and that's plenty of speed for us. Now let's see a video of yours if you will.
@quietmale001018 жыл бұрын
did you see a road demon before you put the bell on lol
@78633488 жыл бұрын
Yes I did.
@quietmale001018 жыл бұрын
the mother in law doesn't count lol
@busdriver14697 жыл бұрын
What do u mean by road demons?
@78633487 жыл бұрын
Legend has it that there are evil mischievous creatures lurking on our road ways and praying on the unsuspecting biker. They latch themselves to our motorcycles, causing untold devastation and mechanical problems. But there is one way to defend yourself from these horrible little monsters. Attaching a small bell to your bike and hanging it very low to the ground is said to trap these beast inside for all eternity where the constant ringing will drive them crazy. The legend also goes on to say that the bell holds twice as much power if given by a close friend or family member.
@bradenwuesthoff56398 жыл бұрын
Is that a subaru boxer engine lol?
@78633488 жыл бұрын
Lol. It sure looks like one.
@savedewey13143 жыл бұрын
Just add 1 little comment I think it's more important to have a pretty woman give it to you. I have mom bails but only have to hang on the bike.
@mi2tn8 жыл бұрын
Road demons? You mean like that moose you about hit with the Mustang? ;-) You want I should send you a bell for it?