FM Series ATV Flail Mowers - Chapman Machinery Ltd

[@jmariocordob]

Con que cilindrada mínima debe contar el cuadri para arrastrar el implemento ?

[@Chapmanmachinery]

Hola, gracias por ponerse en contacto. Recomendamos al menos un mínimo de 400 cc, pero si el terreno es más empinado o más duro, entonces querrá buscar un modelo más grande. Maquinaria Chapman

[@eddiewebb7025]

Will this mower cut brush as well?

[@Chapmanmachinery]

Hi Eddie, It can cut brush as well, just more care needs to be taken with slower speeds etc. Many thanks Chapman Machinery

[@danielperez4543]

Donde comprarla en España

[@graemecullis6595]

Any dealers in Australia?

[@Chapmanmachinery]

Hi Graeme, I have e-mailed you directly!

[@clarkbubar8687]

Any dealers in the USA?

[@Chapmanmachinery]

Hi CLark, Yes we do with stock available - you can find contact details on chapmanmachinery.com/ Hope this is of some help! John

[@clarkbubar8687]

Chapman Machinery Ltd yeah I cannot load your web page.

[@Chapmanmachinery]

Hi @@clarkbubar8687 sorry that the link is not working, I have listed the details below of the dealer; Tim Mullally 845-482-5222 www.mullallytractorsales.com/ Hopefully that is of some help!

[@laurentpoulin9529]

Where we can n’y on canada

[@Chapmanmachinery]

Hi Laurent, You can purchase in Canada from our US agent who you can contact here: www.mullallytractorsales.com/ Hope this is of some help! John

[@vijayrajsalunkhe7495]

Show blade

[@americodinizcarvalhoneto1055]

have a dealer in Brazil?

[@Chapmanmachinery]

We don't currently, but can offer direct shipping if required. Thanks, Chapman Machinery

[@martpoi5702]

Got any dealer in asian?

[@TUTORIALECUDETOATE]

like

[@MrsMika]

What is the width of the wheels and the overall width of the 4 foot model?

[@Chapmanmachinery]

With the wheels at the side of the machine the overall width is 2.075m. With the wheels trailing the machine the overall width is 1.55m. Wheel size is 22x11-8" so overal width of the wheel is approximately 11".

[@codykamminga9667]

A GX 160 would have been enough

[@Chapmanmachinery]

Hi Cody, I'd disagree on that point. For most of the cutting that users will be doing with this machine you need the full 21hp of the GX630 engine we offer. This video is some very light cutting, but again, having a properly sized engine ensures you have a good cut and a fast work-rate. Thanks for watching!

[@codykamminga9667]

Chapman Machinery Ltd well i have one of these that came with a ruined engine, and i had put a GX 160 on it and it had enough power to cut

[@Chapmanmachinery]

@@codykamminga9667 Sounds like it works for you which is good. Picture or video would be great to see though!