ChapMoto.com Pro Works Episode 10: Replacing Chain and Sprocket on a YZ450F

[@barneygoldstein7103]

Great explanation, very easy to follow and listen to. Thank you sir

[@chaparralmotorsports]

Thanks for watching!

[@JaredRectenbaugh]

where did you get those spacers at for the chain adjuster bolts??????

[@gonadiator]

Great video, except dunno why you would adjust the wheel all the way back on the swing arm with the new chain. Typically you do the opposite, adjust the wheel all the way forward so you can keep adjusting it tighter as the chain loosens over time.

[@chaparralmotorsports]

Hello, there may be a little confusion here. Go back and watch where Larry starts adjusting the chain--about the 20:26-25:04 mark. The axle/axle blocks are not all the way back, there is still room for adjustment as the chain stretches.

[@gonadiator]

23:10 you're right, it's not all the way back, but only 3 notches left.

[@chaddavis781]

what size is the rear nut?

[@dontayferguson499]

What size socket used for the front sprocket bolt?

[@chaparralmotorsports]

Hello, I believe nut takes a 27mm socket.

[@Goldnboy2009]

Great tutorial, how much more different will it be on a 2004 yz450f? Thanks in advance

[@natebennett2873]

+Goldnboy2009 not much at all

[@Denissov.med1a]

Thank you !

[@chaparralmotorsports]

***** No problem!

[@suntzuwarsword1964]

Thank you

[@chaparralmotorsports]

You're welcome

[@kevinbroadway5398]

can i run a 14t 53t w a 114 link chain on my 2011 yz450. i 'm thinkin you used 118 links.

[@chaparralmotorsports]

No, if you do that set up you would need at least 126 links.

[@cliffordpugoytv5665]

The 120L chain is good to 13 51? Or 130L

[@chaparralmotorsports]

Hello, what is the year, make, model of your vehicle? What length chain and sprockets are currently on it?

[@dontayferguson499]

Is it the same for a 2018

[@chaparralmotorsports]

Hello, yeah pretty much.

[@josephh5039]

what about the rear brake

[@chaparralmotorsports]

Sorry, I don't follow. What are you asking specifically?

[@josephh5039]

@@chaparralmotorsports you didn’t explain what to do with it when taking off the rear wheel

[@travishicks1979]

What size is the bolt for the front sprocket

[@tylerc.4129]

Travis Hicks did you ever figure out the size socket for the front sprocket? I'm asking the same question.

[@travishicks1979]

24mm for Yamaha 12mm for honda

[@hudsonhollow]

The case saver needs to crush and fail. Those 6mm bolts will fail and take the cases with them with the stronger "case saver"!

[@chaparralmotorsports]

ok

[@hudsonhollow]

@@chaparralmotorsports Very informative video. I had a rider from the Denver area call me with questions about installing his front sprocket on his YZ450F. I didn't feel confident about giving him advice since I didn't have one in my face. I told him I would do some research and get back to him. I found this video and sent him the link. It explains everything he needed to know in detail. Motorcycles have put food on my table since 1969 but there is always something to learn. I have ordered from Chaparral many times over the years and have absolutely no complaints. Thank you.

[@TaxationIsTheft439]

I can’t get my master link off

[@chaparralmotorsports]

Hello, Drill out the rivets? Cut it off?

[@lancerains4185]

Overkill bologna

[@chaparralmotorsports]

Ha! Ha! Ha!

[@idecidenotyou]

Pathetic ego driven, big mad comment..

[@ryanrodriguez70]

Larry where can we get the two collars that support the chain adjusters bolts?

[@ryanrodriguez70]

Larry when I called chaperall, they couldn't find the listing part or a part number.