Charcoal making with no smoke. The 2nd techniques.

The sustainable energy.

[@jessegriffin9]

This is the cleanest and least wasted charcoal making technique I've ever seen on KZbin. A huge respect bro

[@scottsnodgrass4361]

Mr. Jon, I thank you for all the great knowledge you share. This is important information considering all the turmoil in the world. I laugh at some of the comments expecting more efficiency and less waste. They don’t seem to understand that these are survival skills. Peace to you my friend, from Midwest USA!

[@martinsaiyagbonrule9062]

I have seen and watched videos on KZbin, trying to glean information on clean smoke free charcoal making, all other where blablablabla and poor kiln, difficult to understand systems. This one by You is clear with no ambiguity. Thanks verymuch

[@fullcircle4723]

Thats the best example of rocket I've seen. Harness all that heat to heat water. Great job.

[@Not_really]

This is a great take on carbonisation of wood. I love the fact that I can actually apply this method without annoying my neighbours with rising smoke. Many thanks for making and sharing this video.

[@greenenergymali]

0m

[@venkateshnayak9485]

Its a gr8 technique. But carbon with max porosity happens between 350 to 500degrees. At 1000 odd degree u hv less porosity. Carbon sequestration is good at this temp but max below 500 degrees

[@ZsOtherBrother]

This is definitely the best charcoal making technique I've seen so far, and so simple basically anyone can do it. I think if you could use some of the heat that's escaping through the chimney it would be even better. Maybe heat some water with it, (several cubic meters:), or add a "sand battery" at the top to store it... Maybe I'll try that myself :) Thank you for sharing.

[@JankyShack]

This is basically a giant rocket stove with a drum around it. If you put a crucible on the top of that flame you could melt metal garbage like cans and cast them into useful tools.

[@firstname-qq3xp]

Seems dangerous if the crucible falls down with molten metal.

[@robertmachoritsch7093]

Thanks for the video, very informative. I also use the coal for the garden, it helps save water and is good for the plants.

[@neilyakuza6595]

A very ingenious idea. You have used a rocket stove to heat the wood for charcoal. It would be good to use the excess heat generated by the fire to use to heat a steam boiler for a generator or use to heat an earth oven for baking. I really enjoyed this, and it has given me ideas. Thank you.

[@armandbourque2468]

Or a thermal motor to run the fan that makes the rocket stove work better. Or a generator to charge batteries.

[@Impermeabilizacionesinc]

Dry frute ❤

[@Impermeabilizacionesinc]

Make graphite, make pizza

[@beammeup7771]

Excellent demonstration. Thank you for sharing.

[@raynicee]

Brilliant work here. Real charcoal.

[@sachinsundarp]

Awesome video👏👏 Thank you so much for sharing your knowledge about making charcoal in an efficient way 👍👍

[@light12a]

Your design is the best! For my neighborhood, I may make an extension for the exhaust with holes in it so more combustion products can be cleanly burned and produce less flame light.

[@JungleJoeVN]

This method is very good. I was amazed to see the leaves come out without losing their original shape.

[@batchrocketproject4720]

Thank you for sharing the details. I've watched many similar videos, most from Thailand but none have English subtitles and it's difficult to use google translate. I really appreciate you taking the time to explain the build in English. Best wishes.

[@samsonkilunguja2058]

Thank you for sharing this best method ever seen👏🏼👏🏼

[@shilutilongkumer5736]

Think we can also bake or bisque pottery/ terracotta with the same process 😅 this technique was amazing 👍

[@nabeelcheema6976]

A❤very well explain through drawing 🎉

[@JoItYourself]

Brilliant ideas and explanation. I will try also to do like this

[@richotilaar7755]

Thank you for the another knowledge Mr. Jon ....👍🏼

[@harrymills2770]

Most efficient I've ever seen. The outgases enter the pipe at the bottom and are burned in the pipe, adding to the heat supplied by the device. Usually that wood gas is just wasted in other charcoal reactors.

[@user-xp2qg6wh1q]

Thank you guys so much for sharing your knowledge with the world.❤

[@kyleb3754]

Fantastic knowledge, thank you for sharing! 👍👍👍✔✔✔✔💪💪💪

[@HavokTheorem]

Wow, you could boil water for the whole village on that flame! Love it, I would like to make an explanation with more engineering thoughts.

[@jayantmashankar242]

Yes , we can put a heat Exchanger on top to heat air and feed the hot air from bottom

[@SynapticTransmission]

Greetings from Ontario, Canada. This is very interesting. I will definitely try this in the next few months after I finish some other projects. Thank you very much! :-)

[@anishalatheef8717]

Iam Abdul from India..... Awesome job....🌹🌹

[@evelitomoreno1168]

I salute you sir. Fantastic job 👏 thanks for sharing us. Climate change addressed

[@tipshacks3011]

very nice.. you can harness that fire too

[@heatherhuggings6767]

Thanks excellent information. Your knowledge is much appreciated 🙏🏾✌🏾💡❤️🌎❤️

[@edyhermawan269]

Thank you very much for the video. I hope next time we can see how we can use the charcoal for cooking or for another applications.

[@shivaprasad6350]

nice video. good job. thank you sir

[@rosehasan3504]

Excellent information as usual,,waiting for the next video 👍

[@75blackviking]

Very good idea! Smart people making smart invention.

[@jeremytheonlyone]

Dear @JonJandaiLifeisEasy This technique is way far better and simple for elderly farmers who have been working so hard in the village all their life. I've tried it with an elderly who is now about 70 years old a few days ago in the village. My goal is to help them in order to fulfill my life journey with my willingness and eagerness to ease towards sustainable lifestyle. The only hurdles I have experience is in my region our industry and technology is still far behind than in Thailand due to the reason known itself. It is a lot more affordable to get SS304 6" stainless steel pipe in Thailand which is 50% cheaper than I could get it here in Sarawak. Unless, I am buying in several tonnes shipping using containers. Thank you for sharing this. It took some courage and some capital to do this project. It cost me about US$500 to complete one set here in my region.

[@jerryglen986]

Man of great prestige 😊👍

[@SuputraBharathi]

Never seen such an efficient system ...good job ❤

[@theearthflat]

من الرسم قمت بعمل لايك . ووجدت انه فعلا يستحق أكثر من لايك . ... 😊 السوال هل يوصل الكهرباء ولا يخرج منه كهرباء. ❓❓❓

[@ClementOngera]

Thank you JJ for this. However, I would encourage you to also look into biogas, it's more sustainable. Wood is very expensive in our rural area and there's a ban to cut trees, so as an alternative we're looking into investing in biogas.

[@JonJandaiLifeisEasy]

We have less trees in our area before but we plant more in the last 5 -7 years now we have more than we need.

[@ricarpabustansorbeto9153]

I think we can use old woods from house demolished to make charcoal!

[@hvacstudent967]

many trees are easy to coppice and return year after year. one such tree we use for this purpose is black locust, it's prolific, also in Texas a tree that is a nitrogen fixer and similiar to the black locus is the mesquite tree. This tree is very difficult to kill by coppicing so you can use a field of these trees indefinitely for such uses. Also they produce a pod that can be used to feed to chicken, both of the mentioned trees are good for this.

[@tombouie]

Well Done, rock wool might be more available & less expensive insulation: ROCKWOOL ROXUL SAFE products can withstand intense heat up to 2150°F (1177°C) without melting, producing smoke or propagating flames.

[@matata127]

Wow lot of heater@ It can be used for heating water for a pool. I was thinking of a wood oven design producing charcoal at the same time, with this technic I have a really an idea

[@gidajeram2501]

Really very innovative

[@Aloewells]

It's a big rocket stove. The heat should be used for any good use of melting or boiling. If it's just for cooking, biogas would be cheap and useful.

[@mrMacGoover]

I was surprised to see a monk teaching people in your culture something so useful as this, western media does not portray Monks as good helpful contributors to society like seen here.

[@martinbisschoff988]

Yep friend. And guess who is losing out? Sad.

[@somatder]

Hi Jon Jandai. I built this according to your guidance and I have already made two batches of charcoal. However, I had one problem: I had a really hard time keeping the gases from escaping in the gap between the chimney and the top of the drum. I kept adding wet mud and it helped for a while but later the smoke had made it's way through it again. It seems like you guys were really good at sealing it up really good, but did you also have that challenge? Anyways, thanks a lot for sharing, this is what is awesome about youtube and people like you who share this content for us likeminded people

[@somatder]

UPDATE. Made 5 batches of charcoal with this method- nice and dense quality. I realise that it is not possible to avoid the gases from escaping around the chimney without welding or other kinds of sealants. The pressure built up in the pyrolysis is quite high so it will escape in small cracks, By closer inspection I can see you guys had the same challenge. But I realise that it doesn't really matter. I stoppet worrying so much about some smoke escaping and just tried to reduce it. The charcoal came out really good anyways. It shouldn't matter anyways as long as most gas escape the bottom holes in the pipe and provide fuel for pyrolysing the wood

[@gamingmadster]

Jen you should make clay mud. It would work. I was thinking of this for a clay kiln outside. I love this idea

[@NewHampshireJack]

@@somatder When making char cloth and chared punk wood, we have always poked a small hole in our cans to vent gases. Some bushcrafters teach that no vent hole is needed and I believe this system also works because the tins they use are not airtight, allowing gasses to escape.

[@batchrocketproject4720]

@@somatder I haven't built mine yet but I've noticed the escaping gas/smoke in several videos that use this design. What I plan on trying, based on what I've seen in some other videos, is to place a second short 'chimney' tube around the main pipe so that the smoke escaping from the pipe hole is guided up into the flame and efficiently burnt. The outer chimney can also have some air vents to draw further air to mic with the gases and help the burn.

[@jeremytheonlyone]

Get a ceramic fibre cloth / blanket onto the area. The other idea was the how is not fully cut out but it is cut in this manner and clip it. kzbin.info/www/bejne/laW3aX-efbZ8Zpo

[@rickyagaton5000]

bro jon, you have wonderful community projects that i am thinking of replicating here in the Philippines. I am engaged in gardening but I do not own the farmlot, it is inside the school campus. You have said in your previous video for Life is Easy, that you started your planting project using your mother's small portion of farmlot. Then after several years you were able to purchase a bigger farmland through your savings. My question now are: 1. When did you started the Pun Pun Community? 2. How did you purchased the land? Do you have partner-investors? 3. How many hectares? 4. How and when did you involved people in your project? Do they came from the same locality or the people came from other places when you started?? Thank you bro jon, i am always watching all your videos, very informative.

[@JonJandaiLifeisEasy]

1 we started PUNPUN 18 years ago. 2 I bought the land with my wife. We have no investors. 3It's about 9 acres 4People came to volunteer in the first months and stay for many years or until now. Most of people come from different part of the country and from many countries.

[@creativemonkeys8908]

@@JonJandaiLifeisEasy Hi sir,can we come and join as a volunteer to learn about ur community and how it works and how to establish such community in my country (India) .

[@ToonLeighporpeangfarmThailand]

Much much better option than making charcoal in the ground 💚💛🧡

[@jdp1700]

Hi Mr Jon thank you for sharing the videos Simple yet efficient method want to try for coconaut charcoal...👍 I am a bit curious about the hole in the pipe, could you please give a bit of explaination the purpose of the hole?

[@thomasdorku3170]

Hello Jan. Thank you for bringing good value to humanity. Can you confirm if this system will char rice husk? If not, can you look into an efficient way and share?

[@JonJandaiLifeisEasy]

Making charcoal from rice husk is very hard to make it hot up to1,000 degree. It contain more tar.

[@ronryandimaano9878]

Amazing.. wow 😲😲😲😲 thank u

[@ivanguimenez7249]

Mchisimas gracias gran material mi hermano un abrazo.

[@ryaneslava7111]

Very nice

[@RuhindaBeat]

Thanks alot for this research, my question is how much charcoal can this can put out at full capacity ? Thanks again .

[@gurudevjevargiker2109]

Its very clean and efficient process. Thanks for sharing. I have question. Is the charcoal near to activated charcoal or normal charcoal?

[@JonJandaiLifeisEasy]

I'm not quite sure because so many people name charcoal many ways and many meanings but this technique the minimum temp is 1,010 celsius degree. It is the best quality to filter our water, making soap or put in our bread or put in capsules to use as medicine.

[@gamingmadster]

Thank you for this idea.

[@mariacollection2956]

Thanks u a lot for giving clear explanation about the process of making charcoal. M'y question for you sir ,is to know thé way anybody want to make a lot of charcoal if WE wide thé capacity of thé main drum and give more dia to thé burner pipe will WE still get good result ? Once again thanks

[@pennyfenner1354]

Fantastic! It would be great to find a way of harnessing all that heat energy......!

[@ratedmark4704]

Rocket stove.

[@martinbisschoff988]

Exactly my thoughts. Imagine a tad longer pipe with copper coil inside with a water supply. Hot water. Or a side elbow in it with a small flat enclosed compartment. Endless fresh bread, a whole cooked meal, etc.

[@armandbourque2468]

Steam engine to charge batteries.

[@smithy6979]

Well done you have made bio charcoal

[@rheidtech]

Thank you JJ

[@slimdusty6328]

ka pai 👌👍

[@davidtagoe284]

Hi JJ. Thanks ever so much for this excellent video. I tried this using palm kennel shells to make charcoal. All the charcoal around the pipe was very well burnt. The other half near the edges of the barrel not. The palm kennel filling in the barrel is much more dense than the wood. Do you have any idea as to how i can make it work? Thanks again for the great video!

[@zuberiwake1772]

Not JJ but here are some options: 1. Better/thicker insulation arround the barrel. This will help increase the temperatures further out inside the barrel. 2. More starting wood below the barrel. This allows the barrel to heat up more before all outside wood is burnt and the flame continues purely with the wood gas released through the bottom holes of the barrel. 3. Mix the kernels with wood or bamboo to decrease the density. Combinations of these can also help.

[@benicsakp]

I believe, if you cool down the gas coming out on the top, you can try run a generator with it.

[@antoniobennett5330]

What's even crazier is you could put a metal water tank above that flame and create enough hot water for people to show on "charcoal" day !

[@richardgatchell2523]

Fantastic very interesting 👍

[@elsonmekgwe854]

Since i had seen this video i wanted to make charcoal to be able to earn a leaving for myself and also empower the women and the youth from my community and i am about there.

[@dougalexander7204]

Thank you.

[@1943L]

Brilliant working idea.

[@NierNierPasture]

How thick is the wall of the pipe? How many burns will the pipe last? Thank you for sharing the knowledge.

[@pahaadibheji9397]

I am also wondering how thick should be the pipe and if it will have any effect efficiency

[@armandbourque2468]

I'd go 1/8", and it will last fairly well, if its protected from rusting.

[@douglascolman4501]

I have seen many different charcoal ovens and this is by far the best yet. I'm on an island in the Philippines and doubt I can get the layer of insulation here. Could the drum be in a mud brick tower and use sand as insulation?

[@graemezimmer604]

I think that fiber-glass insulation could be used, it is essentially the same as ceramic insulation. Sand could probably be used as long as it was very dry. May be best to bake it first.

[@JonJandaiLifeisEasy]

Many people use sand ash or mud bricks. All of them work fine but it was harder when we take the charcoal off. Try to find what you have is the best way. Cheapest, easiest is the best.

[@etukudodavid]

Thanks for this video. You are correct, energy and fresh water will be in short supply in the future. How good will bamboo charcoal made with this technique be?

[@brian472]

Brilliant idea

[@LygarZeroX]

you can also use bamboo or coconut fibers to make charcoal. basic scrap. you dont have to go out of your way to buy wood. some places may have tree landscaping companies just give you free wood because they dont want to go to a disposal facility.

[@jeremytheonlyone]

May I know, hat is the disadvantage if we could only use 5" inches pipe instead?

[@harryverner6218]

Couldn't u collect the gas the wood is creating to run generator engines instead of just burning it off?

[@nickb3488]

6:17 concrete and fire do not go well together. concrete contains a small amount of water inside of it's morter which makes the rock explode when the water turns into a pressurized gas.

[@kerncountyrd5263]

I had to cut pipe from a concrete wall once. It wasn't fun!

[@kiyoponnn]

looks like you have never studied chemistry

[@jojomojo2011]

How long is fire burnning?

[@DeadshotColada]

I would like to see a PPM test on water filtered through the different charcoals you make, see which is best for water filtration.

[@bobfitz7886]

Oh YEAHHH

[@lifeinpalawan]

He stated early if you use the less quality you will see yellow water from left in resins etc. I will try to recreate his charcoal cooker for the water filters we will be building in the next few weeks. It seems to make sense.

[@DeadshotColada]

@@lifeinpalawan It makes sense, and this works great for water filtration. I am just wondering how this charcoal compares to a Britta filter. A simple PPM test would give better feedback than anything else as to how good of a job the filter is doing.

[@lifeinpalawan]

@@DeadshotColada Sounds good -

[@_Wai_Wai_]

In a different video, Jon Jandai showed how they created 4 Container system, for filtering and purifying water and it is used at Pun Pun center in Chiang Mai Thailand. They have been consuming that water for several years, and they send samples to labs for tests regularly. So far, they have not had any problems i\with their water system.

[@MrDanrn999]

Thank you

[@undpipu1161]

If I don't have insulation (ceramic fiber) , what should I do.@

[@shamanking5195]

based on you experience, is this the most efficient method to make Charcoal ???

[@ramzeneger]

Thank you very much for the video!

[@DilbertCronicles]

It's a giant wood gas stove.. nice

[@sadikhalishaik2026]

👌👌👌👍👍👍❤️❤️❤️

[@chopsddy3]

I’ve seen people make this kind of retort where an additional pipe is attached to the charcoal chamber that pipes the volatile gases out of the chamber and into the fire chamber. Have you tried this? It seems like it would help to keep the creosote formation down within the charcoal chamber while simultaneously increasing the heat of the fire. Great video👍

[@MrRasZee]

that is whats happening . its why the 12 small holes are in the bottom of 6" pipe

[@rehatdulu]

Thank for new charcoal practice, Mr Jon Jandai -How long can this tool be used before it breaks ? -Can it be used for making coconut shell charcoal?

[@JonJandaiLifeisEasy]

- It can last a few years if you use more often it will last longer. - we make charcoal from coconut shell quite a lot here. It is the best charcoal but we can't get a lot of charcoal . It is too hollow it will be better if we smash it so we can fill more in the kiln.

[@donkynutz362]

It conducts electricity or ceates it?!? ...great vid tytytyy

[@abcdefg1966ful]

Excellent .... Thanks ...

[@772777777777777]

You should expand on this and make a wood gasifier from the wood gass

[@h-apitot2746]

Note another interesting technique is the gasifier technique, where you use the gas for cooking. No smoke, too. And you also produce charcoal.

[@Pahaadi]

He said 12 holes 1/4 of an inch..i think that is too small...in video the holes looks bigger, could someone please guide what should be the correct size?

[@Dontspeakboutme]

Million dollar operation. This is rich living, in my opinion.

[@darkstar3246]

which method is better for filtering water? your first style or this one?

[@JonJandaiLifeisEasy]

The first one is cheaper and easier than this one. To filter the water is the same quality.

[@rajahalex460]

Amazing technic thanks

[@matata127]

Thank you for sharing

[@kangromin3352]

Dear sir Is this technic can be applied to coconut shell charcoal ?

[@kanavlyder4711]

Yws

[@scottsnodgrass4361]

Mr. Jon, I’m trying to find some 6” diameter pipe. What I’m finding has 0.28 inch thick wall. Is that too thick/heavy?

[@fargo9059]

Can this kiln be integrated with wood gasifier to produce fuel?

[@BadMoonRising777]

Excellent

[@joelmmontes]

Sir jon, this is an awesome video. Just wanted to ask, When the fire starts, Do you keep putting small stick woods at the top to keep the fire burning? Or just at the start.

[@JonJandaiLifeisEasy]

Just when we start it.

[@CharlieLemmink]

After you get the fire started, the heat starts baking the wood, and then the wood releases gases that enter the chimney through the small holes at the bottom. This continues until the wood releases all of these gases and the fire stops naturally.

[@Arraqiim]

is the result makeing a charcoal or Biochar?

[@DavidRojasElbirt]

Can you share more specifications on the "ceramic isolation" please? To look for a similar product in my country

[@HandfulOfTranquility]

One brand name for the ceramic insulation is "kaowool"

[@hvacstudent967]

@@HandfulOfTranquility how do you wrap the metal around the barrel?