Charger 15-23 Wicker Bill Install Guide | ZL1 Addons

This is our two-piece Wicker Bill for the Dodge Charger. Made of 3/16 Lexan with black sub wicker and a clear smoke center section. Comes with all mounting hardware and instructions.
Product Fits:
- Charger 15-23 SRT Hellcat, SRT, Daytona and Scat Pack
- Charger 20-23 Widebody (All but the Hellcat)
- Will NOT fit the new 2020 Charger Hellcat or 2021 Charger Redeye Widebody spoiler
Product Listing: bit.ly/3myufN5

[@oSuseJ]

Just bought a wicker bill and this video is a great tutorial! Thank you

[@cleveland4kid20]

Installed mine today. It looks good 👍🏻

[@ynrt_5.772]

Nice job looks good 👍🏼

[@yellowsniper1995]

Just beautiful .

[@wjlowe111]

Just bought mine; thanks for black friday 20 percent off

[@goodman-ou6ue]

We want to see how you drilled the wing and installed the screws❤

[@markwho6862]

Is this the standard, dark tint or polished one in this video?

[@jacobmartin1181]

So does that 1st hellcat spoiler piece just stick on with double sided tape? The ones on eBay are all stick on and that seems crappy. Is there a way to bolt it in? Or have someone put pressure on top while I screw a few screws in the bottom from inside ?

[@arthurdelacruz6879]

Thats nice 😎

[@walternem7808]

Does severe weather mess up the wicker bill?

[@GabrielGonzalez-wx7gj]

I ordered mine but i guess the rivets and screws where lost or not packaged

[@dabosserica4434]

Where did talk find the river nuts for this ? I can’t find any

[@usafmueller]

Great tutorial.... just bought mine!!!

[@juanvargas-ii3wg]

Where did you buy yours I’m trying to buy one. I already ordered the middle piece but I need the rest

[@usafmueller]

juan vargas Zl1addons.com

[@canindia]

onecarworld

[@jabarikidd801]

I lost a bolt due someone tampering with it one night do I need to get a whole new bill or can I just replace the bolt ?

[@judai250]

Hi! I would like to get this wicker bill for my Dodge Charger 2021 Scat Pack. I see you guys are in California, I am actually not too far away. Will this wicker bill fit on my Charger Scat Pack?

[@jonathanhorton593]

Compatible for 2020 WB Scatpack Charger?

[@yoshisuehiga7092]

I want to put my dodge durango it is possible that the size will give my car?

[@crimzonr9371]

Hello ... We have 2006 2 Top Banana Chargers R/T .. I am looking to a wicker bill on mine ... I have scoured the internet to see if I can fin a kit like this one but no luck ... Do you know if this setup will work on a 2006 Dodge Charger ??? Any hep would be greatly appreciated ... Sick Car by the Way

[@SUBIESAMURAI07]

It’s look phenomenal but aren’t you afraid to lose some speed? Corvette c7 also lost speed because of it

[@JRIFE87]

where did you get those different looking screw bolt washers that comes with a star head? whenever you order them i received mine with regular black washer and screw bolt

[@zl1addons162]

That is our stealth hardware.

[@bradflo]

Is there a guide for the CHARGER 20-23 HELLCAT/REDEYE STEALTH WICKER BILL? I have taken my car to two different shops and they say the part does not fit and they can not do it.

[@Equalizeryam]

Is that the 25% or %50 tint?

[@Azteca847]

Easy Peezy lemon squeezy

[@flexdenali4778]

Serious question...the flat washer, does it go between the spoiler and the wickerbill or under the tapered plastic washer on the outside?

[@zl1addons162]

The flat washer goes between the bolt and the wicker bill.

[@ilcoolj12]

I need this same one for my Daytona, what are the options? I'm a little confused, sorry..

[@zl1addons162]

Your Daytona has the same spoiler as the SRT, so you can choose the standard or the Stealth. Checkout the site for material options/choices. zl1addons.com/collections/dodge-charger-wicker-bills/products/wicker-bill-for-charger-spoiler-type-hellcat-srt-and-srt-scat-pac

[@JohnSmith-nl2us]

Still have my stealth wickerbill in the shipping box from February. Is this something I can install on my own? Not a single shop in my area knows what a wickerbill is or install it.

[@zl1addons162]

That is something you will need to determine based on watching this video.

[@cleveland4kid20]

What size is the riv nut gun tool?

[@jesusivanbenitezortiz9553]

What size is the rivnut? M5?

[@ArnoldG1990]

Will this fit a 2023 GT?

[@dreday1062000]

Will this fit the 2020 GT?

[@MrDutch1e]

How come regular RT isn't listed in fitment list? It has the exact same spoiler as the Daytona.

[@9lives.707]

if it's the same exact thing then this will fit on ur RT...

[@suppaklick]

I have the rivet gun but I can't find that other piece, where did you get it from??

[@Postingam2]

Did you end up finding it? I can’t

[@MarcusCoker1]

Does this come with a rivet gun if not what rivet gun is that in the video?

[@mohammedh3883]

They have a option where u can buy all the tools u need

[@pegasus7897]

How much does this cost?

[@zackthumann2157]

I have a 2012 r/t without a spoiler on it right now. Would a newer bill fit my car?

[@zl1addons162]

You would need a spoiler to mount the wicker bill.

[@davidrush4386]

Is this exact spoiler not available anymore on your website??

[@Cookie-yp5qg]

It is just bought one

[@ROADWARRIOR21]

Question this one you installed in this video was it the Standard or Dark, also what's the difference between the Standard or Stralth

[@zl1addons162]

It was a polished edge, the difference between the Stealth, and the Standard is that the Stealth Wicker will fade into the edge of the spoiler, while the Standard is more of a squared off look.

[@ROADWARRIOR21]

@@zl1addons162 So the Stealth its much nicer correct?

[@Thetruth1120]

Help! What is the size of the riv nut itself?

[@zl1addons162]

1/4"-20

[@carratala59]

Outstanding. Where are these installers located?

[@cooljs12]

Threaded insert riveter

[@MoparGuy1625]

@@cooljs12I think he meant the shop.

[@vintageluna9870]

What is the size of drill bit you used

[@zl1addons162]

3/8"

[@TheVictor0628]

If I decide to upgrade to the stealth hardware after it’s already been installed, can I just remove the standard hardware and put the stealth in or they wouldn’t work?

[@zl1addons162]

Yes.

[@bigfishtinypond4595]

Will this fit a 2020 Dodge Charger R/T ?

[@WizWiz-qk3bc]

Yes

[@joseavila4931]

What size is the drill bit ?

[@zl1addons162]

3/8" is what we suggest.

[@oreohemi5058]

What size is the rivet gun

[@zl1addons162]

1/4"-20

[@mesru1719]

what material is it made out of?

[@zl1addons162]

We use Lexan to make our Wicker Bills.

[@ulyseeskillingsworth2071]

Where are you guys I need mine installed

[@zl1addons162]

Poway, CA

[@BREADVEVO]

What kind of rev nut tool is that

[@zl1addons162]

It's our rivnut tool we offer.

[@KboogieTRAPs]

I just need the ribnutts to instal it 🤣🤦🏻lost em 🤣🤦🏻

[@jesuscano2101]

Just got a 2020 scat pack charger which version would work for me?

[@zl1addons162]

This will fit your vehicle.

[@ajaniog3330]

Were can I go to install this

[@andreshields1741]

Will this fit a 2019 sxt charger

[@zl1addons162]

Only if you have the SRT spoiler.

[@anagalvez263]

Will this fit on a RT?

[@zl1addons162]

If the RT has the 1 piece spoiler.

[@jacobmartin1181]

so the entire spoiler and wicker bill add on comes up when you open the trunk right ?

[@zl1addons162]

Correct

[@jasonjackson329]

🤦‍♂️ that’s a pretty stupid question man. Geez

[@jacobmartin1181]

JASON JACKSON lmao well i guess you don’t know that they come in either one whole piece or 3 pieces

[@jasonjackson329]

xjacobx 20 lol nope. I learned that today and was kinda disappointed, especially knowing how cheap and easy they are to make on a CNC machine Or hell even a 3D printer.

[@jasonjackson329]

xjacobx 20 really man. They just seem so freaking flimsy and cheap. And that’s kinda not surprising in this day

[@tananski47]

Do u need that rivet gun or u can do it without that ?

[@zl1addons162]

Must use a rivnut gun to install the rivnuts.

[@tundrawhisperer4821]

@@zl1addons162 what size insert is needed for the rivet gun? And does it come with the rivet fittings? Thx

[@britnyrogers3433]

** 3/8th inch bit

[@kevinbarrett2050]

Does automatic car washes kill the spoiler?

[@TeamAdrenalinePHX]

Thats what i want to know.

[@zl1addons162]

We suggest removing the wicker through auto washes.

[@kevinbarrett2050]

ZL1 Addons ok thanks for the reply. I’m gonna buy a cordless drill so I can take it off for my regular automatic car washes I get 3 times a week

[@OGXDream]

@@kevinbarrett2050 regardless of wickerbill or not . Dont take your car through an automatic car wash .

[@OGXDream]

@@kevinbarrett2050 unless its 100% touchless

[@Pnw_Blacksheep]

1,000th like 🤘

[@ryandailey4567]

does this fit the charger GT? i’m pretty sure it’s the same but i wanna ask to be safe

[@brokemike7014]

Ryan Dailey did you ever find out?

[@JohnSmith-nl2us]

It will if you have the 1-piece spoiler.

[@felixfulton4748]

Does it fit the 19 Charger RT?

[@zl1addons162]

If you have the 1 piece spoiler, yes.

[@JohnSmith-nl2us]

Yes. 2019 R/T has SRT body style treatment

[@rt_jesse345]

guessing that also goes for dodge charger rt 2020 , @@JohnSmith-nl2us