Today we install the Charger front splitter. Product: ➤ Charger 15-23 Splitter Extension - zl1addons.com/collections/spl...
Пікірлер: 38
@matt57564 жыл бұрын
Just ordered my ZL1 addons front splitter with Rods for my 2015 Charger Hellcat. Couple issues during install. As Matt shows in this video the HC has an intercooler line Mounted in underneath the center of the radiator so I have to use the outer spots. With that being said my splitter did not have the oval holes drilled out so I had to modify it myself and drill my own holes. Everything else went pretty smooth until we got to the final steps of installing the rods. I either got the wrong rods sent to me or the wrong hardware, none of it works with each other. Some directions would be nice because every single KZbin video I have seen either their camera dies 🙄 or they don’t show the rod installation, couldn’t find a ZL1 addons video for installing splitter rods. Need some help guys, will give a shout tomorrow. Excellent looking product, excellent company 👍🏼🙌🏼👌🏼
@MrStick8302 ай бұрын
I have a 2019 and I’m having same issue. I used the outer holes on the radiator support but the pre-drilled holes don’t align. I guess I will have to drill my own holes to match . They should have addressed this. Existing holes are 10” apart and the outer holes where the brackets mound are 17” apart. What a pain in the behind
@jugtona3 жыл бұрын
How big is the spacers on the radiator mounting point
@CAAARRRLL3 жыл бұрын
similar concept for Chrysler 300 splitter install? I hear people talking more about removing the splitter for oil changes is that true?
@MLance175 жыл бұрын
Did you do a black wrap on the bottom prior to this?
@geraldmoe64784 жыл бұрын
Just Purchase the front splitter for my 2020 WB HC Charger, not really a fan of the splitter rods, do I really need to run the splitter rods?
@bapegodz3 жыл бұрын
What size are the push pins ? My fender extensions are falling apart
@caponecolon46682 жыл бұрын
Looking at a ride charger police issue 120 on clock any tips 2010 rides nice .any advice on wat I should be looking for my first I'm a little leary
@sybasedublin4 жыл бұрын
know of any shops in Atlanta, GA that can do this?
@erikalarid43184 жыл бұрын
Got me a 2019 scat pack love it can u install the splitter on mine ,🤓
@jderos664 жыл бұрын
I live in South Florida does anybody know any shops down here that can install this?
@Pat_Scratches5 жыл бұрын
have you thought about adding 4 additional washers to place around the spacers
@pauljohnmarayag63066 жыл бұрын
Do you have to remove the whole front splitter when doing an oil change?
@2006JeepLimited57L6 жыл бұрын
No!
@jasonholloway25774 жыл бұрын
I was going to ask the same thing. It looks like the back bracket mount bolts go through the removable plastic access piece. I am not seeing how you would do an oil change without pulling most of the bolts / screws out of the bottom. Have a 2019 Charger Scat, do you ship to APO's?
@matt57564 жыл бұрын
Paul, I was looking at that today during my install. For me to do an oil change properly on my Hellcat I need to drain the intercooler as well which allows any excess dirty oils to drain out. With that being said you cannot access that oil line without removing that first belly pan that your splitter mounts over. I am really not looking forward to taking off my splitter every time I have to do an oil change, not to mention taking out all those bolts and push pins every time it is going to be interesting...
@omshantijassu4 жыл бұрын
does this fit 2015+ sxt/rallye?
@zl1addons1624 жыл бұрын
We make a specific RT/SXT setup
@maxxprime38015 жыл бұрын
i just open my box with my splittter and i dont even have the bracket and is not put together can somoone let me know if zl1 change how this splitter is install
@Gene88.4 жыл бұрын
Did you ever get it installed
@maxxprime38014 жыл бұрын
C Gene yes I did zl1 told me I order the wrong splitter but they replace it all and now I have it install good product very well made and good customer service thank you.
@gdub17092 жыл бұрын
I just got mine to. No bracket.
@charlesmiller39563 жыл бұрын
Are the holes pre drilled?
@zl1addons1623 жыл бұрын
The only holes that are not pre-drilled are if you own a Hellcat Charger. You will need to match drill the holes intot he radiator brace to avoid the harness line.
@glockmodder4 жыл бұрын
Does this do anything besides look good ?
@zl1addons1624 жыл бұрын
This splitter will provide down-force at high speeds.
@logannguyen54934 жыл бұрын
Do you sell the front fenders extension separately?
@krashfinatik43965 жыл бұрын
Dude! Where's your safety glasses?
@crazyn84753 жыл бұрын
That was my thought as metal shavings fell on dudes face 🤣
@marqueebuck45783 жыл бұрын
Great product. Bought mine and installed a few days ago and LOVE IT. But here’s something I do want to mention they didn’t in the video that I wish I would of known before ordering. If you’re like me and ordered the splitter with the rods THEY WILL SHIP THEM SEPARATELY. Your splitter will get there at MINIMUM three days before the rods. Would of loved to knew that before purchasing. Hope this helps. Best splitter in the country.
@slimpillow13463 жыл бұрын
I had to find this out today and I’m suppose to install it Friday smh how was the install of the rods ?
@gregrobinson24025 жыл бұрын
To much freaking work already
@Nelbone4 жыл бұрын
greg robinson scared?
@ChrisWashburn4 жыл бұрын
I'd rather pay someone to do it than to do it myself. I don't feel like laying in the dirt to install this thing lol.