Just another Brick in the wall

[@johnb2044]

Chaz stop banging the level mate .... bad bad practice........

[@worrelodorrel7432]

Them bricks up the side of the french doors were like a dogs back leg 🦵😂

[@angusbrown8707]

Does Kieran not use a level ? Or have any of his own

[@scoyle1750]

Polystyrene bead is a pain in the arse if your working on a existing build with it in, not even sure its a great job as found cold spots where it never reached on a house I was replacing damaged brickwork on, your hands won't be frozen rest of week they will be wet instead👍

[@colinfort8725]

When I was on the hod I would have loved working with you easy as 2 & 1 . I was either on muck & bricks/blocks 5&1 and loading out the next left /plot if in front.

[@pitbull4029]

1 on top 2 !

[@sammy_bw]

Amy’s cook book coming soon, think I’d treat the mrs🤷‍♂️😂

[@joshplayspoor2908]

you need to let the glow plug light go out before starting the van mate, you might end up fucking the starter motor, have a good week mate good video.

[@doughay9742]

cringed when i saw that 2 mate

[@joshplayspoor2908]

I could hear the engine and starter waking up to a full sprint 🤣 poor van

[@doughay9742]

@@joshplayspoor2908 not even locked ffs!

[@banff9391]

....and let the disc cutter warm up before revving the nuts off it.

[@darrenwithington6041]

The amount of muck you throw on the floor you could build another house.

[@ONEDARKREP]

The amount of shit you talk you could set up a fertiliser factory 🧐

[@ONEDARKREP]

😂😂

[@Jaceymarshall1996]

never laid a brick in my life but i just watch you after i finish work at 12am its so relaxing to watch lol keep it up

[@carlbernsen1290]

I can’t believe they’re still using that blown insulation, especially on new build! No air flow, bridges between the inner and outer skins, settles leaving cold spots, horrible stuff. I’d rather have a clear void and dry internal walls.

[@fidelcastro9579]

Still smashing it out in the freezing cold. Appreciate the content mate. 👊

[@TopShop1365]

Keep the videos going 👍🏻

[@grahamebennett2620]

Leaving core, not clawing, holes is truly ridiculous with blown in insulation. Just a hole for it to escape. Madness. Like the way you nearly had a pop at your mate. Maybe should have let him finish it rather than you jump on it. He wont be in Monday. Lol. Mind you it's tough picking apart a mates work. 10 years ago I'd be chucking a level up your corners lol. Only joking. Wouldn't do it unless the pier was as pissed as pisa.

[@ToxicViper261]

How come there are random cavity trays scattered around on the 3rd course, is it something to do with the air vents? cheers

[@ryanw9702]

Kieran is rough mate. Are them ties falling back also🤔

[@ragn9068]

Give the guy a rest lad 😂

[@ryanw9702]

I’m Only jealous because we’ve only got half a day in this week haha

[@johntenhave1]

Solid days work! Well done.

[@garyharris184]

Need the barrow handle for those perps bigger at top than bottom bit of a clue there

[@theessexhunter1305]

I did some time with a 2-1 gang, took to many bricks up on the second lift as one of them said they needed more....not sure why he did then said it but then told me to take them down and on to the other scaffolding of the house. I kicked them off the second lift then carried on. They never said anything lol Nice work you do, not easy with the red tape these days lol

[@anthonycarter8309]

Amy is top bird looks after u well 👍

[@sarahjanewhiteford7507]

Keep up the good work mate

[@ashleychandler837]

Hello mate hope your all good, you should let your glow plugs warm up before you turn the van on haha

[@danishbriclayer-andersgamings]

hey my mann, i wish that you would do a video where we see some of your work when its finish. since i start watching your channel you work a lot of places :) but we never see project finish :) great work.

[@neilpile1323]

The steps are handy as well nudge,nudge,wink,wink! say no more!!!!

[@garethheathcote4988]

Your work looks mint mate I wouldn't have one of those houses though there gonna leak life a sieve. It's not surprising how much thought getting f,ed about in this site if this is their standard of design.

[@malcelwell7209]

I’ve been following you for some time Charlie I think some people Are talking the piss out of you , there only one person you Can rely on and that’s Amie bliss her . 👍👍👍

[@plmengineer9238]

In this cold weather thanks for filming and posting. Missed the explanation about expansion joints. Any chance you could go over that again, ta

[@slongwong4894]

Your work is tidy buddy 👍🏻

[@matgurd]

That brickwork Kieran did was awful 👀😂

[@ilikebiscuits5672]

Rough as a badgers and I don’t even know fuck all about laying brick. He wouldn’t be at my site long🤣

[@grahamebennett2620]

Pink Floyd made that phrase famous. Best band ever

[@jeromeduffy9270]

Get out of here. I never knew that

[@grahamebennett2620]

@@jeromeduffy9270 guess you're taking the piss mate. I'm an expert in 3 things . Pink Floyd, Guitars and not too shabby on the trowel. What you expert in?

[@DavidTheFat1]

@@grahamebennett2620 Is that not you being an expert in two things?

[@jeromeduffy9270]

@@grahamebennett2620 Recognizing Doooshbag... math not strong suit? Oiy

[@clinthornsby7026]

That why the prep joints look big..

[@michaelberry1793]

Never seen anyone plumb brickwork like that

[@SuperDry.]

Guessing he did it like that because it was like a banana in the middle from Kieran

[@michaelberry1793]

@@SuperDry. got ya.. I always just skip most of the videos 😛

[@deancowley8045]

State of your van Charlie geezer - sort it out will you my son.

[@knightstemplar8379]

Roll on Friday, Charlie and Amy's drunken adventures series?

[@patodonohoe2759]

Quality Charlie

[@steveadams6552]

love laying Durox blocks. money, money, money

[@MrMerk2884]

I like the fact you don’t have to isolate the cavity is the money still the same as that saves us a lot of time and I noticed the brick work at the windows was not left down for sills what are they doing with that Charlie

[@eggywill5566]

The food is back 🙌

[@chriswithers1041]

Hello Charlie. Not the best time at the moment with the weather for brickwork but we just got to push through it and hope it gets better soon I sent you a message on Facebook messenger if you can have a look and see what you think cheers Charlie stay safe stay positive 👍

[@tommodobbo3475]

Put a pair of surgical latex gloves under your work gloves it'll keep your hands much warmer

[@CharlieCollison]

I’ll give it a go 👍🏻

[@chrisault9093]

@@CharlieCollison or Marigolds

[@benmorriss7250]

Don’t leave that long level about while your on your break you’ll be told not to bother getting back out your van

[@neilpile1323]

Hey that insulation is better than the cotton wool stuff anyway that used to go soggy👍Also it's a pity individual (if they wish!) Bricklayers cannot just say "yes i'll have these for meself" like they could get away with yesteryear ..ps is that a gixxer engine inyer cutter hahahaha🤣

[@blackbob3358]

Charlie, why do'nt you foff on holiday, so i can do stuff. Cyprus is a good do, just now. x.

[@neilpile1323]

Hide that freek'n brush ffs👍😄

[@Throwshub]

Absolutely hate that insolation

[@stevenrowley625]

Won't be surprised if that's one of my installation jobs

[@theweirdthewonderfulandram3459]

Make sure you take a couple of lengths of trim and battery’s charged for the grinder and a bit of add on

[@kylejackson8522]

The legend himself.

[@lmilne4859]

Chicken spot on. Rest 🤢🤢😷😆👍🏻

[@Flashbang80701]

Love that Trowel

[@murphyhihohiho1928]

Your hand are frozen but he is walking around in shorts 😂

[@ragn9068]

I thought Kieron was a labourer 😂

[@redleather100]

Fuck me ive had a few beers , your vid makes me feel like I’ve had 10 pints . I’ll catch up tomorrow 🤢

[@grahamdalzell6933]

Will the door fit ok the reveal leaning 10mm?

[@darraghtraynor1024]

Deadly stuff Charlie bou

[@mattysheriff1881]

Give that van time to heat them glow plugs before turning the key Boyoh. big strain on the engine without em. You didn't finish explaining about movement joint.

[@smurftastic3928]

Mice love that insulation.

[@neilpile1323]

Chas you're qwally mate👍👍

[@nathanpayne2418]

Ties are running back in the building

[@matthewward4661]

I’d have to get pissed every night if I had to work with Keiran

[@thomasbreyen4743]

What trowel do you use... Been looking... And where do you buy your toolmate..?? All the best from Denmark...

[@Stuff-qo2km]

thats a good song

[@lidluser1876]

Great video Charlie but if i may add, i liked the old transition effect, the new square one is meh imo.

[@avemariaonelectricguitar]

16:59 better use profiles. Can look between your level and wall.

[@Tom_Prendiville]

@1:30 nice one Charlie 👍

[@jackrussell9811]

we used to call blokes like kieran LUKE SITEWALKER they spend the day trying to look busy and produce the square root of fuck all

[@anthonyworthington6495]

Are you going to elaborate on the expansion joint?🤔

[@andynolan-5497]

Kieran is slow but he’s rough out !!!!

[@richardchapman5174]

What did you do with the out of plumb door in the end?

[@mrsdmd]

What happened about the door frame that was way out?

[@latasha1786]

Whens your next qna Charlie please?x

[@Entertainment-mc9vp]

Did you have vecancy for brick masonery

[@marcusbridge2817]

Boom 1st

[@jakergore]

doesn't Kez own a level or something? the bubble was halfway over the line LOL

[@tomearnshaw8532]

Poetry.

[@davidyardley1292]

U gone from being the profile king to don't want to use one at all lol

[@SuperDry.]

Kieran desperately needs one by the looks of it 😅

[@emilioalvarez1640]

👌🏻👍🏻

[@tomking3833]

👍🏼👍🏼

[@markbutler805]

Out of interest what prices down there? I am up north £575 and £14 on count

[@scotspie501douglas7]

as a layman when you cut half bricks there is always a corner missing is this needed or does your cement hide it

[@jeffshearer5125]

Mortar covers it

[@scotspie501douglas7]

@@jeffshearer5125 hi jeff as a layman just wonder thanks for coming back does it have any effect on the load of that corner

[@jeffshearer5125]

No, it's just a smaller brick now, gota make them fit,an the brick wall doesn't take the load of much

[@dambricky5724]

Set the profiles, he can run to a line

[@petesy03]

Why is there a course of brick on top of the 8th course?

[@dannnyw111]

nhbc dont want lintels sitting on a brickette course, so just move it down one now

[@petesy03]

@@dannnyw111 that’s throwing it out of coursing, why not put the brick on the dpc and work full block up to your head height, crazy rules not allowing brick under lintels

[@UndisputedRoofer]

Charlie what do you think of rodain?

[@bensomerset1]

Sorry ... but .... Kieran either doesn’t care or needs to leave the trowel alone

[@EPICSHD.]

@@samyueru612 I’m on 100 a day but I’m still an apprentice

[@lmilne4859]

100 a day for a apprentice spoiled min. First year a was on £105 a week. Lol

[@EPICSHD.]

@@samyueru612 3rd

[@MrCharlan1]

@@lmilne4859 I’m 22 on 140’s , been in the job 3 years

[@EPICSHD.]

@@lmilne4859 it’s little bit different because I’m self employed compared to people on the books, I started off labouring for 150 a week lol, done that for a year then got on the tools

[@blakemillward7477]

your van is a tip

[@MrCharlan1]

You’ll get over it

[@blakemillward7477]

@@MrCharlan1 I will but my OCD won’t 🤣

[@jeffshearer5125]

He'll let you clean it, no charge

[@ilikebiscuits5672]

Send k-Ron back to school Charlie boy.

[@dylanowens1223]

Watermelon is the shit

[@ryangray2665]

For some reason I find you videos interesting,I can't find any videos for my trade,might have found a gap in the market seeing how many views you get ha!!!

[@avemariaonelectricguitar]

The dimensions are incorrect. Rightdoor left side you start with a three quarter. Leftdoor right side you start with a whole one. Therefore the expansion joint is out of the middle. No symmetry. Of course you already seen it 😀

[@si-vz8ny]

wrong cavity sock too should be a 200 mm with damp then the 100mm in the party wall creating a T, the expansion is probably the brickies who built the footing not setting it out 4 to 900 correctly now he is just following the bond they have done, always agood idea to get your tape out and check before you lay can always change the bond so cuts are same up both doors and expantions in the middle of the plots

[@avemariaonelectricguitar]

@@si-vz8ny Yes always check you work and that of someone else ( in this case).You often encounter an mistake again. If there is brickwork above the door frames you will also now get a difference

[@johnpemberton5089]

That muck looks like it's got the shits!

[@FedericoBuonaguidi]

Hey what kind of trowel is that?

[@stevesmith3850]

Looks like a whs tyzack 10 inch iv just ordered one

[@dantheman2335]

kieran has lost the passion ,money must be made or hes just totally pissed of with it, can understand , glad im out of it , fair play to ya charlie its not easy.

[@doughay9742]

yes mate exactly, site work has dragged him down, pride has long gone its just about numbers so chuck em down and don't look back lol

[@dantheman2335]

@@doughay9742 👍

[@Forever1ch]

@ecohomesinsuslationuk. For all your insulation needs 👌

[@dylanbloomfield8047]

Why do you throw so many bricks away when they look alright to me?

[@VidzMisc]

Your van is about as tidy as Kieran’s brickwork. Fuck sakes the state of Kieran’s work. He is having a right laugh. Give him the sack

[@garyoliver739]

How does the site get all the smeared mortar off of the facing brick?

[@aaronpurcell7870]

Brick acid, a small amount of the substance, watered down, brushed on will essentially burn the mortar off. Then just needs rinsing off

[@wumpty93]

@@aaronpurcell7870 Unless the brickwork is rough as fuck then to get the stains off all the joints turn to dust.

[@garyoliver739]

Seems really rough, should facing brickwork not be a lot cleaner than this ?

[@davidyardley1292]

Shouldn't the Jack Wall be in concrete

[@SuperDry.]

@@garyoliver739 Not easy with sticky wet mortar

[@Jm09085]

No rock wool insulation in the jack wall ? Its not cavity pumped surely.

[@petep8828]

So, Instead of making half cuts. Why don’t you guys just use the header?

[@neilsmart78]

Your not aloud to put the rough side into the cavity on site

[@petep8828]

@@neilsmart78 oh! Thanks for the reply, im guessing its because of water.

[@Luckytrowel12]

Also to stop the insulation getting stuck when it is squirted it in. That's one reason why the NSBC are so fussy about having smooth cavities.

[@garycooper227]

Charlie why do you bang your towel so much on spot board 35 times in the frist 16 mins

[@billycoughlin8970]

do you not guage up your brick or block work

[@rorygorman9823]

Was it a brick you ordered fri night. Did you order another amy?