So this is how you run an aftermarket watercooling kit on em.
@AJRestoration Жыл бұрын
Seal the head properly, remove the decompression lever (its not water tight) water is getting into the valves and into the engine. Get a flywheel with the cooling fins ground off ( the water resistance is too much with the cooling fins.) Make sure no water is getting into the valves and it should run fine. also make sure to use gasket sealant on the exhaust and intake.
@dieselbossbrandon2 жыл бұрын
I definitely think that was a success. I think it was a fuel issue not water. I give you a A++ thank you for your hard work it was awesome to see! I'd love to see more on this little engine. I just got 2 of them!
@davegeorge70942 жыл бұрын
What I like to see. Should be fine, no carb to waterclog. I'd pressurize crank case to be sure oil keeps working.
@josephseymore85602 жыл бұрын
The problem ight have been the fan and the load to spin the water you can see how the water splashes once the level it's too high ,the load becomes greater than the hp it can handle leading it to stall
@ivancounsell40772 жыл бұрын
Ingested water through the crankcase breather, internal combustion engines must have a crankcase breather.
@poolmotorrepairguyFL2 жыл бұрын
3Hp Diesel (motor). Why plugin your car to charge the battery.. good idea and a Turbo ? and take fan off
@turbodog9911 ай бұрын
TONS of vibration. Maybe air pockets in fuel line due to vibration.
@markcwynar6394 Жыл бұрын
That's Amazing, something I would of never thought of. We have to hang out sometime, Neet, thanks!!!
@HaleHunterz2 жыл бұрын
Yanno, you sound a lot like James Woods haha. Great video!
@Tommysmess2 жыл бұрын
It may work better if the cooling fan was not on the engine
@dirtfootracing87882 жыл бұрын
I believe the fan was removed - just the flywheel causing all the splashing
@bin_laggin9672 жыл бұрын
home made hot water heater .....gone wrong lmao
@dirtfootracing87882 жыл бұрын
seriously wrong
@dieselbossbrandon2 жыл бұрын
If you fix the valve cover with a water hose seal you might have it! Keep trying it's awesome to see!
@carterlukow70852 жыл бұрын
This is awesome love vidoes like this
@KuntalGhosh2 жыл бұрын
U have to take the cooling fan off or else that will heat 70% of your power trying to circulate all that water 😂
@heathenprojects26393 жыл бұрын
I bought one of these a few months ago I'm looking at mounting for a mud motor
@alexboucher49382 жыл бұрын
I just bought one with the same idea. Let me know how the little diesel performs on the water.
@heathenprojects26392 жыл бұрын
@@alexboucher4938 it was a bust I'm new to mud motor and wanted a larger boat that could carry some weight so I'm saving for a larger set up with a 670 predator this little motor is nice I put it on a tiller
@nitroninja76902 жыл бұрын
What made it a busy I was thinking about trying to run one on a surface drive
@susanvaughn7412 жыл бұрын
I’d love to see a water jacket around the head and cylinder to make it water cooled!
@davegeorge70942 жыл бұрын
Cooling fan take mad power away and forces water injested.
@seymoarsalvage11 ай бұрын
the fan was removed
@f40ph8811 ай бұрын
i think the exhaust should have had an expansion chamber instead of just straight piping
@DktheWelder3 жыл бұрын
Wow looks harder than I thought! How much power are those motors?
@dirtfootracing87883 жыл бұрын
Around 4 hp
@dadoVRC Жыл бұрын
The question is:why?"
@BVN-TEXAS11 ай бұрын
Put forced air on the intake to keep it from having that issue.
@douglundy5755 Жыл бұрын
excessive cooling probably killed the ignition point to where it would not fire. Oh yes if it has a crankcase vent you missed putting a snorkel on that opening and sucked water into the oil.
@jessesodom85942 жыл бұрын
Submarine motor
@torogi22 жыл бұрын
what is the engine brand?
@Snailmailtrucker2 жыл бұрын
*"LoveYouLongTime"*
@eloc5802 жыл бұрын
lol run a belt to a generator head and it can be a water heater and a generator
@sour_grapes42807 ай бұрын
Deer China, my package arrived with flood damage…
@gamingwithmr.fregles88029 ай бұрын
put a turbo on it
@motorenbastler92893 ай бұрын
Didnt work because the engine overheated 🤣🤣🤣
@matthewbouselli38782 жыл бұрын
what the hell is the purpose of doing that
@dirtfootracing87882 жыл бұрын
Since diesel engine are not reliant on ignition systems they are way more “waterproof” - I wanted to see how much it could take. Done just for fun
@holdenbrougham10569 ай бұрын
Over heated then cracked with cold water , real intelligence , wasted motor
@safetyharborfirearms9 ай бұрын
Neither of those happens...still runs like it just left chyna
@sumanmondalsuman76353 жыл бұрын
Sir engine flywheel blower fan xta lod engine Stop
@moofusenterprises75033 жыл бұрын
Yea he’s right. Sir engine flywheel blower fan xta lod engine stop.
@dirtfootracing87883 жыл бұрын
@@moofusenterprises7503 I removed the blower fan
@sumanmondalsuman76353 жыл бұрын
Happy new year 💐
@moofusenterprises75033 жыл бұрын
@@dirtfootracing8788 I was making a joke about the grammar. I can’t tell if you caught on or not