Yiyibyus Diesel motor. Injector pump shims Delete! Maxing out the RPMS

[@greglewis3382]

I have the same engine and I put it on my reel mower a year ago. So far, it works ok. Two things I don't like about it: 1. It's too loud (I need hearing protection) 2. It vibrates terribly.

[@Projects5309]

The Open exhaust, no shim driveway revs that occurred @13:58 revved really cleanly. No breaking up in the ketchup zone. This is notable.

[@ColdStartGarage]

Hmm. I was so focused on the twigs blowing around I completely missed that. I went back and watched it really quick 🤣

[@Projects5309]

Great and informative content here. Can't wait to see the new rotational bonuses propel you guys.

[@gm_muscle0671]

I have one of these Chinese diesel motors I swapped on to a 1969 Sears garden tractor. Got the tractor with a blown engine so I swapped the diesel over. Rattles to no end but rolls coal out of the stack and has enough torque to tow anything I can find and the tractor has a 6 speed manual so with the lowest gear I could tow more. Gonna use it to plow snow this winter and btw I have a video of it on my channel I had to do for a school project.

[@ColdStartGarage]

I don’t use the motor much these days. My KZbin videos have slowed way down. New career new things to learn. It’s taking a toll. I’m not done filming. I have projects filmed. They are waiting on me

[@watcherofthingsthatrkekano5930]

Bbf sent me here. love the channel

[@ColdStartGarage]

Thanks! Glad you found the channel. 🤘🏻🏁

[@watcherofthingsthatrkekano5930]

Food stamp light bulbs had me chuckling.

[@ColdStartGarage]

🤣

[@Sky_vulpes]

Pretty cool video

[@ColdStartGarage]

Thanks. Continue to do your research. I was an amateur with this diesel engine back then!

[@Sky_vulpes]

@ColdStartGarage yeah I'm thinking about picking one up and trying to get the most power i can for a gocart or maybe even a lawnmower definitely going to add a turbo as well

[@ColdStartGarage]

I have gokart videos. Rudimentary gokart

[@BuildBreakFix]

They grow up so fast! It brings tear to my eye he started it the right way this time LOL 🍺🤣👍 I had to say something couldn't handle suffering anymore as poor guy started it! I do enjoy a good youtube suffering on video! honestly though one point we all make that error when first screw with small diesel. Had one once about huffed and puffed trying to start it for hour..... then older guys laughing like watch this...... SOB! started right up without a broken wrist!

[@stanleybest8833]

Ouch. I have one. Sichuan Sifa MB168F. I bought a 3/4 to one inch shaft adapter and honed the inside to .787 = 20 MM. With a 1 inch keyed shaft, I bought a 7 inch thin Vee belt pulley for an alternator. Your shims only change the throttle position. A governor is your friend because it makes your speed stable. Cold starts? Hot water on the cylinder. Mount it? On thick plate aluminum and not any kind of thin wall steel. I use 15W 40 oil and pump diesel. 196 CC's means it's a very small diesel good for 1 to 1 n 1/2 horsepower. I avoid the lowest idle and unnecessary high revs. Oil consumption is much higher than other motors so check quite often. If you don't respect it, it won't give you 2000 plus hours. It takes about 100 to break in.

[@ColdStartGarage]

Thanks for your insight. The little motor is shoved in the deepest corner of my shop. Cool little guy. But it was just a basic introduction to diesels for me. I had it on a gokart for a bit

[@stanleybest8833]

@@ColdStartGarage You got it. These are probably the most precious engines we own. The castings are over the top. The dimensions are very tight. The alloys are meticulous.

[@ColdStartGarage]

@stanleybest8833 after theses first few videos. I stoped thrashing it. It’s in a safe spot. Forgive my ignorance in my videos. 🏁🏁🏁🤘🏻

[@c6unjourc6toujours]

This is sport diesel !!! 😂🎉❤

[@darploin5071]

The way I start mine is I don't yank on that quarter anymore I use a gokart bump box

[@ColdStartGarage]

That’s a great idea!

[@ontariofishing1790]

Air planes are neat... I've always wanted a master rod to hang on my wall

[@ColdStartGarage]

Ya I wish I was into filmin’ sh!t back then. I’d have so much crazy stuff

[@chrismayberry4315]

I dont know if hobo freight is the same as princess auto .. but if it is you can buy cart and mini bike carcasses

[@ColdStartGarage]

Really? That be awesome

[@chrismayberry4315]

@@ColdStartGarage yes sir

[@ColdStartGarage]

@@chrismayberry4315 might have to check out princess auto website and see if they like bald eagle freedom units and ship me a dang ole frame!

[@ColdStartGarage]

They are pricy at the princess auto. 200 more at tractor supply it could come with an engine. Mini bike that is. So facepage market place might be the best option.

[@chrismayberry4315]

@@ColdStartGarage they where on sale not long ago that might of been when I seen them and yeah mark place is a deadly joint lol makes you buy a quad you didn't really need just for a challenge lol

[@gamingfuchs9331]

you adjustet the timing with removing one shim

[@ColdStartGarage]

Ya I discovered that. Thanks for your insight anyways! 🤘🏻🏁

[@darploin5071]

You're either Canadian or from the upper Midwest of the United States because of your accent but it's nothing wrong with I don't know what the I'm from the 7 cities of Southeastern Virginia

[@ColdStartGarage]

Canada is my neighbor. New York is where I’m from