Cheap & Decent Jig For DIY Cabinet Hardware Installation? The ENJOYWOOD Shelf Pin Jig & Hinge Jig

[@IfDawidCanYouCan]

Brilliant idea for who does cabinet often especially DIYers like us. Thank you greatly for your review. Cheers!!!

[@CasualDIY]

Thanks for watching!

[@MCsCreations]

Really awesome jig, Tomasz! 😃 Thanks for the review! Stay safe there with your family! 🖖😊

[@CasualDIY]

Thank you for watching my friend, all the best

[@davidstreet3505]

The shelf pin has 32mm spacing( a standard for cabinets) so you may be able to use the shelf pins part to align the second part of the hinge which is also spaced at 32mm apart with the 37mm depth setting which is also a standard measurement in from the edge. It may be a little clumsy in practice due to the size of the jig but should work.

[@CasualDIY]

Interesting idea I need to test that put, thanks 👍

[@theduftmeister]

Het Thomasz. How did you find the shelf pin repeat locator by way of accuracy when making the shelf pins. At about 5:20 when it is covered briefly, it seems to have a bit of slop when put into the jig. When you actually use it later on in the video at about 11:20, the pin seems quite stable but presumably that's because it is wedged into the wood with your pre-drilled holes. If there is still play in there, would it not make repeatability a bit inacurate and therefore shelves that wobble? Just curious as was looking at ordering but if it is a bit wobbly and inaccurate, I may give it a miss. Thanks Thomasz.

[@CasualDIY]

It's accurate enough for what it's meant to do. Shelves are nice and stable. But the jig is only as good as good. You use it and set it up. If the fit of the pin was tighter, then it just would be very difficult to use. For general DIY builds this is absolutely fine. If you are a professional carpenter and building cabinets for living then you will need to invest in Festool track for a router.

[@theduftmeister]

@@CasualDIY Thanks Thomaz, really appreciate that. I am certainly NOT a professional carpenter or cabinet maker :) Sounds like this will be fine. Thanks again for taking time to reply Thomasz. 👍

[@Micha_Ba]

Good morning, Even though I avoid Banggood, Temu and the like, the video is well made, your explanation is easy to understand, just for that reason a 👍, not because of the product!

[@CasualDIY]

Thank you very much

[@mathewgallimore1484]

You're not pre drilling the holes, you're just drilling them 😂

[@davidstreet3505]

Pre drilling means before drilling so it never happens when people say that (Americans) what they mean is pilot drilling!

[@gonegliding2966]

Thanks for the review.

[@CasualDIY]

Thank you for watching

[@Mindventmofficial]

Not very effective if you want to do handles get a better jig a true position jig is best or get a clone that jig is for shelf pins mainly

[@CasualDIY]

Well for normal DIY jobs I think its just fine