amzn.to/48lcXvy Truck crane This was on a 2008 Ford F-150 but you can adapt crane to any vehicle. Crane is extremely sturdy with no flex. Stay tune for future videos on installing a electric winch on their crane
Пікірлер: 83
@ironcladtemplar5073 ай бұрын
Idk if you're still doing this channel, but thank you so much for this video!!! I was so frustrated after buying this crane and trying to install it! You're design and vid was excellent!
@quickspoolgarage3 ай бұрын
Thanks for watching!
@stevewayne14803 жыл бұрын
How about uploading a continuation of the video, showing the engine actually being loaded into and out of the bed ?
@quickspoolgarage3 жыл бұрын
Will do as soon as I finish the upgraded winch, thanks
@brad39332 жыл бұрын
Guess it didn't make it into the bed. How's it doing, do u still have it in the truck?
@UncleStevesWorkshop11 ай бұрын
I don't think it will work for wide items like engines.. to clear the gate you need the arm all the way out, but once you swing it arm hits the far side of the bed walls. Would have to remove the tailgate to work
@eldybellacetin816711 ай бұрын
Best version of this build I have seen
@quickspoolgarage11 ай бұрын
Thanks I really appreciate it.
@Zaknbrit01 Жыл бұрын
Don't normally comment on videos, but you did an excellent job! Straight to the point and great work all around. My friend sent me this as he has MS and wants me to install so he can use the lift for a wheel chair. Will just replicate and save me some extra thinking time, lol. Keep it up.
@BoBuilds2 жыл бұрын
Man your a youtube natural.. This channel is gonna blow up!
@williamlott76122 жыл бұрын
Good job; great idea on the bracing. Darlington, South Carolina
@mattg995811 ай бұрын
Great brackets i think i will try that on my old dodge. I like how it ties into both frame rails.
@asala21162 жыл бұрын
Hey mate I jusy want to say thankyou for such a detailed video. Sydney Australia 🇦🇺
@vetteman15422 жыл бұрын
Finally, this vid shows how to brace it right. So many others install theirs and have to do it over and still its not braced enough. Thanks for sharing.
@quickspoolgarage2 жыл бұрын
Thanks, check out my other updated crane video.
@vetteman15422 жыл бұрын
@@quickspoolgarage Checked it out ! Im about to install mine except I have a Toyota Tundra, I can only fit 1 cross brace being my spare tire cradle is in the way but maybe I can just use a 2x3 or 2x4
@charleseast3439 Жыл бұрын
Good video, thanks! What are the dimensions of the base plate?
@billanderson36062 жыл бұрын
Love the braces, maybe overkill but I would do the exact same thing. Better overkill than dangerous. Bravo, I feel better now installing mine, this is the best vid iv'e seen. TY.
@quickspoolgarage2 жыл бұрын
Thanks Bud, I’ve added a winch and pedestal to rest the boom. Video coming soon.
@youridiguy3409 Жыл бұрын
I did something similar but i mounted mine by my wheel well. I only had an inch of room under the bed so i used a piece of 1" plate 13"x45" across the wheel arch of the frame along with 3/4" gussets and it doubles as gooseneck hitch. I also added a winch and a shiev pulley 2:1 to help slow down the winch speed and make it easier on the winch motor as well. Next step for mine is to add a 12v hydraulic jack for the boom height.
@jvinsnes8 ай бұрын
Looks solid man. Will be doing a DIY build on mine
@botfoblhrp8 күн бұрын
i loved the bracket you built
@quickspoolgarage8 күн бұрын
@@botfoblhrp thanks for viewing
@williamsantiago73039 ай бұрын
That's a well done job sir. When did you say that I could bring you mine to do? 😂😂😂
@nobullshiit56823 жыл бұрын
yeah that's the way I'm gonna do it , thanks man .simple strong and not expensive .
@quickspoolgarage3 жыл бұрын
Thanks, stay tuned.. I’m working on adding the pedestal for the boom and a winch!!
@evanforsyth48773 жыл бұрын
Great video, man. Super helpful
@quickspoolgarage3 жыл бұрын
Thanks
@clusa37212 жыл бұрын
Many thanks for your video and expertise in welding also.
@quickspoolgarage2 жыл бұрын
No problem, thanks for watching
@douglasthompson27402 жыл бұрын
A long arm jack would be more useful to get the boom up with a load and clear the truck bed. A hand winch on it would be another useful addition. Nice job reinforcing the bed. Too many people actually believe the advertising and just install it. A good way to trash your bed.
@quickspoolgarage2 жыл бұрын
Thanks I’m installing a winch new vid comin soon.
@brandonGCHACHU2 жыл бұрын
Harbor freight sells one with a cable winch on it as well but it was about $60 more
@quickspoolgarage2 жыл бұрын
@@brandonGCHACHU yes but I believe that sticks out way above past the bed. This one is not noticeable unless you look inside the bed if the truck.
@TXNitroFord3 ай бұрын
@@quickspoolgarage about to do this where did you buy the 2x2?
@Jay-oq8bl2 жыл бұрын
Great video bro
@quickspoolgarage2 жыл бұрын
Thanks bro
@6923celica2 жыл бұрын
Good video! Actually gonna use this to put my welder in and out of my truck
@quickspoolgarage2 жыл бұрын
Stay tuned for a update video next week
@simonh51102 жыл бұрын
Same thing I plan to do. Don’t want the extra weight of the welder at all times making my gas milage go down unless I’m doing a job
@YourAverageFNAF_Edits11 ай бұрын
Left side opener tailgate convertion kit will be nice
@brandonGCHACHU2 жыл бұрын
Nice work
@quickspoolgarage2 жыл бұрын
Thank you. Update video coming soon
@michaeljamison8254Ай бұрын
Nice work. A bit overkill using .250 wall. That's enough for a gooseneck hitch in a 1 ton, and probably double the thickness of your trucks frame itself. Also thicker than any engine hoist frame. But i guess if you have it laying around why not.
@quickspoolgarageАй бұрын
True but better overkill than it bending or breaking under a load 👍
@DunnMotors6 ай бұрын
Nice!
@quickspoolgarage5 ай бұрын
Thank you! Cheers!
@justinheard5954 Жыл бұрын
Metal square tubing along inside of the edge of the frame, you know he'll I don't know 3/4 ft to the front you know so it's pulling on them back now. Then they're pissed it really is you know if you're pulling off the back and I'm pulling off of sideways so it's just going to rock that over and roll it over to bring weight to it but he needs a lateral link to the bed front-to-back
@mp-xt2rg19 күн бұрын
The mount seems good but i don't see how its usable. You cant pick up that engine and place it in the bed as it will hit the side of the bed. you cant go shorter on the arm for more capacity because it wont clear the tailgate. you'd have to add a winch to make this useful.
@quickspoolgarage17 күн бұрын
Very usable and works amazing! See my other video
@MasteringMayhem Жыл бұрын
really considering getting this for my truck bed. Thanks for the video.
@quickspoolgarage Жыл бұрын
Thanks for viewing
@ramchillarege1658 Жыл бұрын
I need to do this. Would you explain how you got access.. removing the lights, or whatever. I just looked under the truck to see if there was a way to get to it from the underside, but it did not look like one could. And, thank you. Great video.
@quickspoolgarage Жыл бұрын
Super easy unbolt the fuel nozzle neck usually 3-4 screws, remove the torx bolts holding the bed to the frame, and unplug the main harness to the taillights most of the time it’s right behind the spare tire.
@augiebragg67822 жыл бұрын
Can you get the crane high enough to put the engine on the bed tho?? Was thinking of getting one for loading welder but it seems like it doesn’t have the reach
@quickspoolgarage2 жыл бұрын
it definitely has enough room to get an engine in and out of the truck. I have an update video coming soon hopefully tomorrow. Thanks
@donswords6671 Жыл бұрын
Is the gas tank far out of the way when you are welding? That's the only thing that would give me pause welding under there. Thanks!!
@quickspoolgarage Жыл бұрын
Yes gas tank is a good ways. Way further than if the muffler were to get replaced. Thanks for viewing
@CUSTOMWORKS7.3PSD9 ай бұрын
That's cute but since you can't get that engine in the back of the truck What the hell is the use of that thing ?
@quickspoolgarage9 ай бұрын
Check out my other video 🙄
@altamuu2 жыл бұрын
Why don't you remove the tailgate before you lift something with your crane?
@quickspoolgarage2 жыл бұрын
I’ve taken the tailgate off when I’ve needed to leave the boom retracted.
@dieselmechanic9824 Жыл бұрын
Hey brother we can give it a real test it and see if it can put that LS3 in my truck bed lol. Nice vid
@quickspoolgarage Жыл бұрын
😂thanks for watching
@hylomane7 ай бұрын
You need a bigger crane, this is basically only useful for 500lb loads as the boom needs to be extended all the way. On top of that there isn't much room to lift larger objects. Useful, but not as useful as it could have been for the same amount of effort.
@quickspoolgarage7 ай бұрын
This has worked perfect for what I need it for. And the fact it’s totally concealed is what sold me.
@melindaortiz97412 жыл бұрын
👍
@dar7771 Жыл бұрын
Would be nice to know if the boom goes up high enough to get that in the truck. My guess is no.
@quickspoolgarage Жыл бұрын
Check out my other video 👌
@officer1402 жыл бұрын
Very nice job! I need to do the same. What were your dimensions? I have the same set up.
@quickspoolgarage2 жыл бұрын
2x2 square tubing 1/4 thick. 👌
@officer1402 жыл бұрын
@@quickspoolgarage Thanks but I meant the dimensions for the tubing: cuts for length from end to end.
@srileo3 жыл бұрын
How high does the arm articulate?
@quickspoolgarage2 жыл бұрын
Almost completely vertical. I try and post a new video with the winch and at deferent angles on the next video
@tanglewood77710 ай бұрын
how you going to lower engine in to bed arms to long
@quickspoolgarage10 ай бұрын
Raise the boom all the way up and lower the engine with the manual winch. Check out my other video.
@grumpyg93502 жыл бұрын
👍👍👍👍👏🏻👏🏻👏🏻
@marinemomkerry2 жыл бұрын
How high does this go up?
@quickspoolgarage2 жыл бұрын
Check out my other video I have a pretty good demonstration on it. Thanks for watching
@GNXClone Жыл бұрын
Not concerned about the bracing rusting out?
@quickspoolgarage Жыл бұрын
I really wasn’t worried about it. But a coat of paint definitely not of hurt. Thanks for watching