cheap recovery track mount $10

Cheap recovery track mount for just $10. Storing the recovery tracks on your jeep/4x4 shouldn't cost more than the recovery tracks it self...but for just $10 you can easily store your tracks any where on your jeep.
There are so many different ways to store your recovery tracks when you are off-road, a lot of the options on the market can be very expensive upwards of $500, but in this video I will show you a cheap and easy way to store your recovery tracks on your Jeep Wrangler for less than $10
If you like the tie downs in this video check the link below.... full price $5.99 sale price $4.10, get a great deal below.
www.supercheap...
support the cheap Jeeper channel by buying a cheap jeeper sticker today.
cheap-jeeper.s...
#jeep #cheapjeep #recoverytracks

[@Whiteandsonsgarage]

Let me know how you are storing your recovery tracks...

[@Jim_woods]

If i had some id let you know

[@ln1921]

Mate I am an absolute numty with tie downs and have everything you have but never understood how to execute. You’ve saved me! I’ve tied down incorrectly for years 😂

[@Whiteandsonsgarage]

Hahaha I did the same, I was doing it wrong for years. I’m glad I could help.

[@102Montana]

What a cute lil boy ....good for you letting him be with you ...doing things ..

[@Whiteandsonsgarage]

Thanks mate really appreciate it, he is getting more involved the older he gets. Thanks

[@ronelgaetos4607]

cheers for this vedeo mate it will help for me and everyone to install the recovery tracks

[@Whiteandsonsgarage]

No problem at all, I am glad it helped, it’s really cheap and simple but works so well. Thanks mate

[@TJ_Beam]

My Maxxtrax came bundled with some mounting pins. But this is a great idea 💡

[@Whiteandsonsgarage]

TJ Beam nice, will they been going on the roof rack? Thanks mate 🤙

[@TJ_Beam]

CHEAP JEEPER yeah mate. Probably front of the rack. So much work to do on the Jeep and zero free time atm.

[@Whiteandsonsgarage]

TJ Beam nice, that sucks, wish I could give you a hand 🤚

[@TJ_Beam]

CHEAP JEEPER yeah that’d be great to have a Jeep buddy down here to help with a few things. I’ve literally got a room full of boxes full of parts to get installed. I had planned on tomorrow but I gotta work. Take a load up to Singleton in the morning so there goes my Saturday.

[@Whiteandsonsgarage]

TJ Beam dam that sucks mate, absolutely love installing new part 👌

[@jeep2353]

Great video, i have just been chucking my ones in the jeep because i didn't wont to spend the $120.

[@Whiteandsonsgarage]

Glad I could help

[@stavio12]

Hey mate, awesome idea. I've been putting my maxtraxx behind the drivers seat on the floor and have been looking at strapping it to the roof. Now that I know how I'll be off to supercheap tomorrow. I'm sick of looking at prices for the roof mounts, they are ridiculously high and not justified for my budget same goes for Hema HX1, I just use paper maps. Thanks for the Video.

[@Whiteandsonsgarage]

No problem at all, supercheap auto is a life saver. I did exactly the same, it crazy how expensive they can be just to hold something. Haha good on you mate 🤙

[@stavio12]

@@Whiteandsonsgarage Thanks for the reply mate. Got the straps today, Cheers.

[@Whiteandsonsgarage]

@@stavio12 no problem at all. Awesome let me know how it all comes together

[@Jim_woods]

If i had recovery trax I'd let you know how I mounted them but I have none.

[@Whiteandsonsgarage]

Jim Woods oh man that sucks, if you ever do.. let me know

[@zakshaikh5659]

@White & sons garage Hey mate, that's exactly what I was thinking of doing with my vortex crossbars but wasn't sure of the size and channel nut type to use. Can you please let me know what channel nuts you've used? I am assuming you have to slot them in the channel from the end of the crossbars and the spring and flat washer sits between the channel and the T nut? Also, keen to know if you have experienced any issues with this setup? Cheers

[@Whiteandsonsgarage]

Hey, thanks really appreciate it. We used a universal M8 channel nut, yes I had to slide my one in from the side, your rack might be slightly different, yes I used a flat and spring washer. Hope this helps. Thanks

[@williambacon1494]

How do the eyebolts mount in roof racks?

[@Whiteandsonsgarage]

They just slot in really good system, there is an end cap that blocks the end so they don’t come out.

[@kimiee172]

How did you you actually install the eye bolts to your roof rack?

[@Whiteandsonsgarage]

Just with a washer and nut into the T channel of the roof rack

[@kimiee172]

@@Whiteandsonsgarage could I just strap them down and not use the eye bolts?

[@Whiteandsonsgarage]

@@kimiee172 yes definitely, just wrap it around the roof rack and you are good to go 🤙

[@johnywalker069]

what was the size of the eyelet ring/bolt you used from bunnings ?

[@Whiteandsonsgarage]

Yeah definitely, I used a M6 eye bolt, not a bad size, could of gone one size bigger.

[@williambacon1494]

Which brand roof racks you run? Nut and eyelet easy install to rack?

[@Whiteandsonsgarage]

I am running the rhino rack backbone system, yes the just slot into the rack.

[@williambacon1494]

@@Whiteandsonsgarage with a regular nut? Or a special channel nut? I’m trying to source a long thread channel nut/bolt now

[@Whiteandsonsgarage]

@@williambacon1494 I just did a nut and washer from Bunnings but you can get channel nuts from super cheap auto. I will send you a photo on Instagram if you like.