Cheap Repair Of A Broken Carbon Fiber Icehockey Stick (€5) *Part 1 Repair*

[@DMoules]

Excellent repair. Can you share the type of epoxy (brand name) you recommend? I’d like specific details to make sure I buy the right kind. Thanks

[@dufmanjr213]

What is the black cloth-like piece that covers the carbon/kevlar piece?

[@MatthieuLibeert]

Hi Brandon, the 'hair like stuff" like you call it are some carbonfiberstrands I cut into fine pieces...I use it to fill the gap up with some epoxy... you can compare it to applying bondo but in that case it's a thickened epoxy with carbon fiber ;) the hybrid (Carbon/Kevlar) is something you should be able to buy on most online composite-shops and so on. You can use regular epoxy for the blade (thats what I did ;) )

[@brandonhockey17]

Hi Matthieu, what was the black hair like stuff you applied on the hockey blade at 4:18 ? Also where do you get the "hybrid" from at 6:38. Can I just use regular epoxy for the blade? Thanks

[@kevin0443]

Est-ce-que tu aurais un lien pour chacun des produits à acheter stp? Parceque j'y connais rien niveau carbon et epoxy.. Merci

[@fishingjeepbc9519]

pretty sweet, what did you use to reinforce it? I have just made a homemade hockey blade and i attached it on with carbon fiber but do I have to use something to re enforce it?

[@noble350tube]

Hi, the red tape is it normal electrical tape?

[@MatthieuLibeert]

I reinforced it with Carbonfiber, Hybrid Carbon/Kevlar and some chopped CF... all of this with Epoxyresin those should be the strongest materials to use to reinforce it...

[@filipkovarga6836]

What the name of the glue you used

[@void3923]

Are those shin guards for hockey or football?

[@Gaceto91]

What is the stuff called that u clean the stick with?

[@zackleblanc8534]

HI there, loved the video! I got a couple question if you could answer that would be great! -What kind of apoxie did you use? -How and where did you get the fiber - glace shavings? -What grit of sandpaper -What is the patch you put at the end? (carbon and Kevlar) and what patch do you put on top of that one ?

[@TerrysTwigReviews]

Nice video. Thanks for sharing.

[@kristoffer955]

Does it matter what epoxy resins you use?

[@MatthieuLibeert]

The epoxy you use might have a little bit of influence on the behaviour, It might be better to have an epoxy that has a little bit of flex into it...you should ask your local shop whats best...I work with a brand I'm quit happy about giving me some good results...It would be some trial and error to get it perfect but any epoxy resin should do the trick

[@Duff85izzy21]

Good video ! It was helpful

[@1q3er5]

so wait ur putting tape right over wet epoxy?

[@MatthieuLibeert]

Yes to apply extra pressure

[@jopoitras]

Hi for your 2 wood stick, Did you put something special on it? Some beewax or something like that? Because I try to do the same think and it’s glued with the blade! Lolll

[@fishingjeepbc9519]

Okay, thank you. Hopefully my stick works haha

[@igor999ast]

дааа ребята , так клюшки не ремонтируют. после такого ремонта в лучшем случае по теннисному мячу можно будет бить)) надо обязательно использовать карбоновую трубу

[@Duff85izzy21]

Are you Finnish your accent reminds me of the dudesons

[@MatthieuLibeert]

Haha, English isn't my native language, I speak Flemish/Dutch and French :) I'm from Belgium

[@MatthieuLibeert]

Correct, nothing special on the tape :)

[@RyanMattockpyro]

Good deal#

[@MatthieuLibeert]

Correct, nothing special on the tape :)