Рет қаралды 3,663
I was looking to cut down on all the wiring needed to run a wired remote speed control for a finishing/wrapping motor setup I've been playing around with. I knew that LED dimmers work with pulse width modulation and there are wireless LED dimmers available for just a few dollars...why not give it a try!?!?
It works pretty well I'd say. There is more motor noise using this setup at slower speeds and I'm sure that has something to do with the pulse frequency. If anyone knows how to work around (maybe a capacitor or something wired inline with the motor input side???) for the low speed noise I'd love to hear that.
There isn't as much variability of the low end speed control as you get with a wired dc motor pwm speed controller. I can get the wired pwm down to about 20 rpms with good torque (the motor is a 200 rpm gear motor). With the wireless setup, I can only get the rpms down to around 80. Less than that and the motor stalls.
The 3 quick setting buttons give you quick access to a high, medium and low speed range which is very convenient.
I don't know how long this setup will last before it fails. I really like the convenience of a wireless setup. It is nice not to have the wiring to deal with. The speed range is good (not great), especially considering the price of the remote LED dimmer.
This video is to show how I set this up and a quick demonstration. Please note that this is not what these LED dimmers are built to do, so if you build a similar setup you do so at your own risk!
#thefishinghobby #rodbuilding #guidewraps
All of my links (my store/social media/email information) are here: linkpop.com/52...