Cheap vs EXPENSIVE Sequential LED Strips

We did a side by side comparison of cheap amazon silicone strips, more expensive silicone strips, addressable LED strips, and YuniqueLED Stripz with Ghozt Sequencers.
Links and Promo Codes below:
Ghozt 28 Channel Sequencer and BlueGhozt addressable controller
10% Discount Code: FlyRyde
GhoztLighting.com
Amazon LED Strip:
amzn.to/36ZOgou
TOOBs
amzn.to/3hSDEzR
Amazon 5 Meter Addressable LED Strip:
amzn.to/2NBfvhI
Join the Community as a Channel Member!
/ @flyryde
FOLLOW ME ON SOCIAL MEDIA
IG: / flyryde
FB: / flyryde
Twitch: / flyrydechris

[@garforce2]

tim is amazing, I can’t even come close to that level of creativity

[@iNytrix]

Favorite is the addressable blueghozt, the $130 silicone tube variation is very good as well for some applications.

[@jaredevers6459]

I think the $130 is the best option, it just looks the smoothest.

[@fablighting7884]

Timmy did that in his sleep , thats how dope that guy is , Tim Shields love ya bud💯💚💚

[@spoopdiewoopdie8092]

Dude where do you guys come up with this creativity lol. I’ve been trying to make animations and I generally suck !

[@bryancenterfitt7127]

The cheap one looks good and would definitely work for someone on a budget..but dude... the ghost lighting is by far the absolute best!

[@flyryde]

I agree!

[@412psekustomzllc7]

It comes down to you get what you pay for. If you want quality you need to free up that cheddar. Obviously the best/most expensive option comes with challenges as far as programming but also the freedom to create endless possibilities is dope. I can't speak for anyone but myself, but why would you punish yourself always replacing the cheapest option because an led dies or it stops it's basic functions. If your into fancy custom led lighting I see no reason to be cheap. Although I can see that guy/girl that buys every stick on chrome accessory from Advanced Auto/O'Reillys/Auto Zone going with the $20 Amazon option. C'mon we all know that guy/girl in our area!

[@TechTokOffical]

That is essentially the idea I've been trying to convey to u for the past year and a half. Only I want them the square lens of an e36

[@EQOAnostalgia]

Looking into these since they ship with a Vpin cabinet i'm about to buy. Didn't really know much about them other than people having awesome holiday displays lol.

[@tyronebegay702]

Always kool.. Love it.. Hours of fun.. 👊🙏👍 expensive is worth it..

[@adrianvallejo3396]

When I have the money I'm going to for sure get that ghozt module for my tesla model 3

[@LS1mike1997]

So question; do you have to use a sequencer to utilize a simple running light/turn signal combo? Just a solid switchback without animation or sequential illumination.

[@landojr8990]

The Ghozt are by far the best; but depending on the build it might not make sense from a financial standpoint. Since I’m a neat freak when it comes to lighting, I’ll just save my money and either go for the $120- $130 version or all out for the top of the line (never on a daily driver tho😌😌)

[@RC-rg3vz]

I have so many questions to making my own headlights like do I need to monitor voltage output and input? How do I do that? Do I need to match what the one voltage is for the headlights? I want my Ford Fusion lights to have sequence to them when I unlock them. I’m watching all your videos on building lights!

[@JWard2]

The xkglow "toobs" as he called it is the best IMO if it came in red for brake light along with turnsignal

[@flopez5918]

Hello, I would like to know how much is it worth to make led switchback for door handles?

[@shaungowler8909]

Hi I have a set of thease it has 4 wires black/red / blue / green what is the blue and green wires and where do thease attach too also what are thease wires for ?

[@pcolasoldier31]

The Ghost lighting takes the cake.

[@keatongreen2450]

Where do you get all the individual LEDs, LED solder strips and the LED strips? Is that all from youniqueLED?

[@kman915]

I have those cheap amazon/ebay sequentials and I like the ease of installation. But they are not very bright, and some of the cheap leds burned out. I want something more premium quality, flexible and brighter like that thicker more chunky one, but not sure if it will fit where I want it. I really don't want to have to disassemble my headlight housings.

[@raulonate5668]

Is it possible to get a custom order and get made sequential c light for tail lights for 2018 wrx like you did for dustin williams wrx

[@jbpad22]

Ive always wanted to ask...what do you think about Morimoto led lights...

[@callsign_gh0st770]

Hey bro I have a jeep wrangler and I’m looking to put some sequentials up front and I would like to know if there’s any that like have a sequential animataion at start up of the vehicle do you have any brand recommendations that are more you just plug them In and do it out of the box?

[@danielluczak4695]

Dudeee I'm trying to have that first sequence you did on start up on my underflow. Im trying to figure out if I need to run a sequencer after the blueghozt controller or can I do that with either or? I don't think blueghozt has a sequence on startup trigger point 😔

[@RauhdySS]

I like the best. I’d just need to make friends with the programmer wizards. I’d gladly pay for an email that I could load on my car.

[@flyryde]

We’re definitely going to get Tim some bucks and sell his animation I think. That’d be amazing!

[@spoopdiewoopdie8092]

@@flyryde lol seriously. !!

[@ericfrancis83]

Tim built and programmed my tail lights, he’s a solid guy and builder!!

[@spoopdiewoopdie8092]

@@flyryde is it Tim shields if it is him. He is helping me out with programming lol. He is customizing the WRX tails. And he showed me what it would look like and I’m truly in love

[@buddhimann]

M too interested on this programming of leds

[@MatKiller1197]

So ive been going crazy watching a ton of your videos because i want to put a sequential led strip in the headlight of my 2006 Daytona 675 for running lights and turn signals. First off Thank you for all the informative videos! Second I made the mistake of getting the chinese ones off of amazon and looked alright in the beginning but the adhesive is trash and the turn signal leds arent that bright to be seen in the daytime. Which ones do you recommend to be pretty bright enough but its also good quality so i dont have to ever go back in the headlight. Also are the Profile RGB halos the brightest RGB halos in the market for angel eyes??

[@MatKiller1197]

Why like the comment and not respond to the question??

[@SkitzV]

Damn bro you looking buff 💪🏻💪🏻

[@flyryde]

It’s all the wires I solder and videos I edit. Oh and all the talking I do on Clubhouse. Geek Gains 🤓

[@killersleeve382]

Before this even plays I’m voting for ghozt

[@flyryde]

Lol, that’s like insider trading 🤣 you already know bro! What’s your 2nd place?

[@thilankaudarasenadeera940]

How much this light system???😍😍😍❤️❤️❤️

[@ecurb]

Does clicking "power target circuit from tool" at 1:20 prevent you from having to power the module separately while programming it?

[@flyryde]

No, I accidentally do both sometimes. I don’t have any data on what that can do damage wise, but so far, nothing is broken that I know is a direct result of “double powering” during flashing.

[@ultrapac2568]

What you suggest?

[@demetriusstone3607]

Ghost light 💯🔥🔥

[@flyryde]

👻 I’m with you dude. What about 2nd place?

[@PrashantSharma-mv6be]

Do you make and sell these

[@JWard2]

Where can we find the second one (tubes I think he called it) but in red for brake lights?

[@mclellan83]

You ever find any? I'm looking for the same to do a custom setup tails. I have ghozt for the front emblem but looking for the bright tube

[@JWard2]

@@mclellan83 I never did sadly. I gave up

[@jonnyrebl]

Is anyone making long sequential leds? Like long enough for both sides of a 24ft pontoon boat?

[@kenyattawheeler1734]

Need that in my life lol

[@camver100]

This this ! What led sequential strip would you recommend for a 350z. I’ve tried profile pivot , but then don’t bend laterally.

[@flyryde]

Anything but the big stupid tooobs lmao. I think it boils down to preference, and how you want them to look when not in use. A big ass white noodle just looks silly to me, but it sure is easy to plop in there 🤦‍♂️🤣

[@camver100]

@@flyryde I like the normally led strips but I’m looking for something to diffuse the lights Bcs I don’t like the bare led design haha. Have you come across any solutions?

[@greenrogue07]

@FlyRyde lmao me last night wanting to smash my first build because i cant fit the damn noodle anywhere in the headlight

[@8145dwerdna]

@@flyryde Think the big toobs would fit behind a c-light... Say the 8-14 wrx/sti oemassive ones? Even if removing the bulky tube part? There's replacement led strips for RGBW, but I dont want RGBW. I just want White/Amber sequential.

[@AlexanderGarcia-mp3lb]

Ghozt the best

[@flyryde]

What about 2nd place?

[@Demop_VW_garage]

$130 for sure the hard ones don't bend so using them inside a front head light would be hard.

[@ronyhyper]

Yoo where is the Mazda 3? 🥲

[@flyryde]

Lookin faded and neglected. Lol. It needs a GoFundMe if I’m ever gonna get it wrapped or painted lol

[@NajarOffroad]

Why do they have to burn my eyeballs though

[@flyryde]

What doesn’t kill you makes you stronger Jon 💪

[@jubthreesixnine688]

Ghozt

[@demetriusstone3607]

About six hours

[@ODGColornChrome]

If he's skilled it probably took him about a minute and a half.

[@victorlopez2143]

No way I could pay 1300$ for these led light strips- I'm Retired so I need to be frugal with my spending..The 20$ ones I've seen are just fine with me..

[@joshuamarko87]

id say a good 10 hours at least programming is not fast at all.

[@ikaikakamai4195]

Tim spent about 12hrs