The least expensive fluid beds that I could come up with, for powder coating fishing lures.
Пікірлер: 152
@madisonmoss68902 жыл бұрын
*Lures looks very realistic even prunked my friends with it.Looks very durable **enjoyable.fishing** recommend sunk very good into the water.Cons: Storage package could be bigger.*
@jesseshumaker27182 жыл бұрын
Yah. the views on this give the story. easiest way to make a fluid bed on youtube. I watched the video took notes, went to home depot/amazon, bought the parts and followed the video. I was powder coating beautifully after my first run. love it. good work.
@jrodell273 жыл бұрын
Just made 5 of these and your instructions were great and these fluid beds work out perfectly. The whisper 60 paired with those plastic valves really help fine tune the powder movement in the cup. With the "buy in costs" for material you can build 20 of these. I used a miter saw to get smooth cuts on the PVC. Thanks for the video!
@jamesphillips2216 Жыл бұрын
Very helpful and very detailed video! Thanks for sharing!! Please do more of these type videos!!
@larrydruschel59633 жыл бұрын
I made a dozen of these fluid beds. I made labels and applied them. I also wanted to tell you about the Spigot plug that I used on tod. The spigot plug is loose fitting on the 2" tubing. I found that i could take a 3 oz plastic SOLO drinking cup and put over the spigot plug and push it down and then cut the excess plastic off, that it fits the loose gap on the tube. the rolled drinking edge leaves a 1/16 " gap. Now you don't have to worry about your paint spilling out.
@tonygardner76553 жыл бұрын
Thanks for the great video. New at this and the video was so helpful. Made five bowels a few months ago using this tutorial, have painted dozens of times, and they work great! Copier paper works with no issues, good flow and no blow outs. I also, as Chris, used gorilla glue to assemble and holding fine thus far. Neat, Simple, Inexpensive and they work!!
@toddpetri24572 жыл бұрын
Your design works very well. I made mine out of 3 inch piping, only because I use a method that involves dipping 10 jig-heads at a time. Great video!
@pbwilliams84 Жыл бұрын
I need details on said method
@hantheman72 жыл бұрын
Great video! I made 7 of these similar to yours but used 1 1/2" PVC and made the top pipe 4" long since I'm dipping GIANT 4 ounce jig heads in them that have a BIG 8/0 hook size. Lowes Charlotte test caps were crap because they were so loose they wouldn't stay in the pipe if you tilted it over and they were more than twice the cost of the Oatey brand ones that fit much better and were deeper I got from Home Depot. Of course with inflation they way it is now the cost has significantly gone up :(
@jessealvarez88932 жыл бұрын
I used your method it works perfectly only thing I did different was I used my battery Air raider from what I use for minnows from my bait bucket and it works perfect!
@bryannolan13202 жыл бұрын
Great video Make sure you buy the right coupling.some couplings are only 7/8 deep.
@mrjunior1023 Жыл бұрын
Great video. Possible cheaper way….. I use a section of the 1/4” thick cardboard tubes that my rods from Tackle Direct were shipped in. Comes with 2 end caps. Then only needed one piece of PVC for either the base or the insert.
@SealsRacingConcepts2 жыл бұрын
Great breakdown. I will be using this method to custom paint Hot Wheels cars. Seems like it will be easier than using spray paints or an airbrush system.
@Tighterlinesfishing8149 ай бұрын
Just used this to build mine. Very easy and great how too thanks man!
@ericpierro12172 жыл бұрын
I just built 5 of these. I changed the dimensions abit and used a needle valve from Home Depot. They work flawlessly with 20# copy paper as a diffuser. Thanks!
@justtinkering60542 жыл бұрын
I’m glad I could help.
@RevampedOutdoors3 жыл бұрын
Thanks for the awesome tutorial. I think I'll use your design and maybe just glue in the bottom portion with no paper, then glue the paper to a bunch of top sections and swap them out on one base. Great tutorial!
@digitalwoodshop2 жыл бұрын
That is a great idea.... Glue to the bottom of the upper piece.... Thanks
@WoodyBeGamin11 ай бұрын
It’s crazy that a 10’ stick of 2” PVC has nearly tripled since you posted this video 3 years ago. $6.68 compared to now $15.78 at Lowe’s.
@xxxbackspinxxx3 жыл бұрын
Got mine put together. Just waiting on valves and air pump.
@troylarsen23763 жыл бұрын
Thank for a great video. I will be making some up this week. 👍🇺🇸👍
@bryannolan13202 жыл бұрын
I made a couple using coffe filters for the filter instead of paper.works great. Thanx man I paint a lot of jigs.
@jeffreyowens45020 күн бұрын
I asked that question above. The coffee filters work better than paper?
@joebillups48934 ай бұрын
Great video explaining everything!!!
@barthanes12 жыл бұрын
This is a really awesome setup. I thought of an improvement. You could set up a manifold to your aquarium pump. Then you wouldn't have to switch the line. Just turn on the pump and open the valve for the color you want to use. Again, thanks for the great info. Hope you catch a monster.
@justtinkering60542 жыл бұрын
Thanks for watching and the suggestion.
@digitalwoodshop2 жыл бұрын
Great Video. The comments are priceless too.
@roberts.45023 жыл бұрын
Great video. Will be making this! Tight lines 🎣
@jeffreyowens45020 күн бұрын
A couple of questions: 1) How about coffee filters instead of paper? 2) If you have to remove the bottom part to change the paper/filter, isn't it difficult to re-align the holes that the air valve goes into? I have everything ready and plan on making them in the next day or two. Just working some questions out in my mind.
@justtinkering605420 күн бұрын
It's been a while but I believe I tried coffee filters and didn't like how it worked. I know I tried a couple different types of paper. As for realigning the holes, yes it will be difficult. You may try to purposely misalign the holes completely so that the hole would be sealed. Then drill a new hole. I have not had to change the paper in any of my cups. They don't get much use, but I haven't had any problems when I do use them either. I hope this helps.
@joeblowjohnny22973 жыл бұрын
Awesome video ! Now try some epoxy , hardened , & color glow pigment and you got glow in the dark jigs , blade , & spoons ! THANKS FOR VIDEO !
@digitalwoodshop2 жыл бұрын
Does the Glow come out white or a green or blue tint?
@joeblowjohnny22972 жыл бұрын
@@digitalwoodshop there are so many colors and products on the market . Do you diligent homework and pick out 1 is all I can say .
@nygardenguru3 жыл бұрын
The only bad thing it’s not engineered to come apart to change the filter. I may have made the bottom piece bigger and jus up the air pressure.
@Big_Mike72 Жыл бұрын
Great information thanks for sharing
@AndrewMurphy8383 Жыл бұрын
and you can buy the pvc glue that has primer and glue all in one just one can to deal with then
@paulharwood12815 ай бұрын
Thank you for the Video and always the info :)
@andreh22a Жыл бұрын
if you make few your idea is great but if you make only one the 10 feet 1.5 is 35$ canadian the union value is 15$ canadian its more cheaper to go that way if you make only one but great idea
@10-4tackle24 жыл бұрын
Great video! What is the name and size of the valve you are using?
@robertchadwick29253 жыл бұрын
Good DIY Video. Thanks.
@seanoflanagan7128 Жыл бұрын
AQUANEAT Aquarium Control Valve,2 Way Air Valve,Plastic Air Regulator, for Fish Tank Air Pump, Grey,20PCS
@tzzzz20 Жыл бұрын
I did one with the coupling and one like yours. Absolutely no difference in performance and 1/4 the price.
@kingsalmon59052 жыл бұрын
Awesome! Thank you for the video.
@justtinkering60542 жыл бұрын
Glad I could help.
@DEVILDOG3334 Жыл бұрын
Thanks, man. I love the ones I made. I got like 9
@LBadventure24 Жыл бұрын
Anyway I can get a full list of what you used with sizes
@toddpetri24572 жыл бұрын
Side note. You’re dead on with the printer paper. Thinking I knew better, I tried several other materials. 20lb printer paper produces the best powder fluid for myself as well. Almost no volcano. Very even deep fluffing.
@Homer24fАй бұрын
Thanks. I’m thinking about getting into making my own jigs. Any suggestions on a kit to get started?
@justtinkering6054Ай бұрын
Hot Pot 2 is a good melter. Do-it molds are the best for a beginner. Barlow's or Jann's Netcraft have everything you'll need to get started. Lead is hard to find clean and soft. Check local scrapyards.
@Homer24fАй бұрын
@@justtinkering6054 thank you!
@squatchymcsquatchsquatch30152 жыл бұрын
Made this today. Thanks duder
@Davemower2 ай бұрын
Do you have a link for the valves and the pump please
@jasonvenesky24382 жыл бұрын
Could you put the materials list in the description?
@chrisavila20733 жыл бұрын
I use gorilla clear fast drying glue dries in 3 seconds
@tedjones33573 жыл бұрын
i'm going to build one for my shop thanks
@justtinkering60543 жыл бұрын
I could help.
@mikekarpiak52863 жыл бұрын
If I’m painting jig heads up to 3 ounces should I go to 3 inch PVC ?
@cmaccap69832 жыл бұрын
Yes, that's what I did.
@brucegibson53993 жыл бұрын
Thanks much.
@scottnra3 жыл бұрын
I totally get it, but how do you replace our filter paper later? It is cheaper but the Union makes replacing media easy. The cost of the union is still cheap when factoring in the cost savings of jig making.
@robertbastian32605 ай бұрын
What's the valve sku number on Amazon?
@ernievegajr70583 жыл бұрын
Does the air flow through the paper into the powder
@justtinkering60543 жыл бұрын
Yes, the air flows through the paper.
@bill89852 жыл бұрын
What brand or part number for the angle "air fitting" valve?
@klboutdoors9644 Жыл бұрын
What size that hose I bought that Pompano didn’t come with a hose
@PineyKingsnake Жыл бұрын
"You can find it on Amazon." Link?
@petepeterson21543 жыл бұрын
Very slick! What's the name of that valve please?
@justtinkering60543 жыл бұрын
Search Amazon for “aquarium air valve” and pick the one you like best.
@dexstock14302 жыл бұрын
Can you send me the link for the valves please
@jeremyschueller96183 жыл бұрын
Thanks for a great break down on how to diy these. Can't wait to make my own. Just wanted to get the name of the air valve please, thanks.
@michaelross5674 Жыл бұрын
Maybe pigments are thicker than others
@rickkunz51623 жыл бұрын
Made one , it works great ! 👍🍺👍
@justtinkering60543 жыл бұрын
Glad it worked out for you.
@jbay69462 жыл бұрын
Can you list the materials and where you got them?
@joeharris85742 жыл бұрын
Good video. Would coffee filters work in place of the paper?
@justtinkering60542 жыл бұрын
You could try a coffee filter. I thought about it, but thought they might be a little too porous. I never tried. It might be better though!
@jamesbarron12022 жыл бұрын
Did the coffee filter work? I thought of using a coffee filter also and went searching the comments and found this.
@user-iv3ci5vt8s6 ай бұрын
Where did you get the 2" long coupler for so cheap ( around me there running about $3.00 )
@justtinkering60546 ай бұрын
I got all the pvc fittings from Lowe’s, but this video is 4 yrs old now. Prices have gone up a lot since then.
@klboutdoors9644 Жыл бұрын
What’s the little valve called and do you have a link
@danmitchell10383 жыл бұрын
Good luck!
@randyrogers29162 жыл бұрын
Nice video. Do have the link for the air valves? Also have you tried to make any out of 1.5" PVC? That way it would use even less paint? Also if you cut the 2 1/4 longer would that help reduce some mess and bubbling out paint?
@justtinkering60542 жыл бұрын
I didn’t try any smaller diameter PVC. I was afraid it would be too narrow to fit large jigs comfortably. You could try longer pieces of PVC. I never saw any need to. Depending on what you’re doing though, you might want longer PVC.
@edernest39962 жыл бұрын
Thanks for the video. It was easy and inexpensive to make. I am having issue with the painted jig head looking like sand paper. Am I not getting the lead hot enough? Thanks
@justtinkering60542 жыл бұрын
Possibly. If you think it needs more heat after dipping in the powder, you can put it back in front of the heat gun to melt the paint more.
@edernest39962 жыл бұрын
@@justtinkering6054 Thank you for your prompt response.
@RussellHoughton Жыл бұрын
What are the air valves called.
@daviddincler74943 жыл бұрын
We’re do you get the valves
@swey-zdean62393 жыл бұрын
What's the name of the valves on Amazon what size?
@Big_Mike72 Жыл бұрын
Do you have a link for the air valve?
@rickkunz51623 жыл бұрын
Have you tried this in a bed of 4 wells for painting jigs ? , I like your demo and the break down of the pricing per item .Thank you ! 👍
@justtinkering60543 жыл бұрын
I think the most I’ve had going at one time is 6 colors. The pump handled it no problem.
@rickkunz51623 жыл бұрын
Thanks for the update 😊
@rickkunz51623 жыл бұрын
Just a F.Y.I. I put together a 5 well , have no issues using it . 👍 Thanks for your video 📸 ...
@Opiemus Жыл бұрын
How do you keep the paint out of your jig eyes especially when powder coating very small jigs like 1/32 oz. ? I appreciate your video and I made some fluid beds thanks to you.
@justtinkering6054 Жыл бұрын
If you can angle your jigs so that the eyes don’t get in the powder, that is best. If you have to dip the eye, make sure the jig is good and hot. The powder melts a little thinner on a hot jig. Sometimes tapping your pliers/hemostats on the side of the cup, after you dip it, can help to knock off the extra.
@mrdeadeye007 Жыл бұрын
I use shrink tubing. Works very well
@andrewmorke2 жыл бұрын
What're the vAlves called? Where can I buy gray valves?
@robknoblauch58102 жыл бұрын
Do you have a model number for the valve?
@hogman22762 ай бұрын
Hello heated my part up Melted it When it cools is it hard? It looks so wet
@justtinkering60542 ай бұрын
You need to cure your parts in an oven to get the most durable finish. If you don’t cure them, the paint will be brittle. You should be able to drop your jigs on concrete, with some force, and they shouldn’t chip. I cure mine at about 350 F for about 25 minutes. I use a toaster oven. Don’t trust the built in thermostat. Get a food thermometer to check the oven’s actual temp.
@hogman22762 ай бұрын
Thank you
@mikesfarmmikesfarm39773 жыл бұрын
Thanks much for vid. Ever try coffee filters ?
@justtinkering60543 жыл бұрын
I have not tried them. I’ve heard some folks have good luck with them.
@michaellyons56732 жыл бұрын
use a coffee filter works great!!!
@Darryl6034 жыл бұрын
You can make it cheaper if you don't require schedule 40 pipe
@Tom-io5os3 жыл бұрын
I would think thin wall pipe will do the same job. There isn't any pressure to deal with.
@jimschmitz4821 Жыл бұрын
Great job!...and CHEEP!😁
@michaelross5674 Жыл бұрын
What about coffee filter instead of paper
@justtinkering6054 Жыл бұрын
Might be a bit too porous. Also, I was afraid it would tear when pushing the two halves together. You could try though. If you do, let me know how it works. Thanks.
@robertbastian32605 ай бұрын
Sku number for Amazon valve?@@justtinkering6054
@garrydraper84202 жыл бұрын
Where did you get the whisper 60 and the name of the control valve .
@justtinkering60542 жыл бұрын
The whisper pump came from Amazon or Walmart. I can’t exactly remember, but I think they were both the same price at the time. As far as the valves, I just searched Amazon for aquarium air valve and those came up.
@dannyruijters12182 жыл бұрын
What is that in cm pipe?
@ferociousfishing9273 жыл бұрын
Will a whisper 10 work?
@chuckmarez92932 жыл бұрын
What you're of valves, or what does it read on the packaging.
@chuckmarez92932 жыл бұрын
I meant What type of valves..
@jefffrey57942 жыл бұрын
Went to lowes today, ain’t making them for that cheap anymore
@justtinkering60542 жыл бұрын
Heck, I can’t even afford the gas to go to Lowes anymore! ;)
@jefffrey57942 жыл бұрын
@@justtinkering6054 it’s only going to get worse unfortunately
@jefffrey57942 жыл бұрын
@@justtinkering6054 is there a difference in using 1.5” vs 2”
@justtinkering60542 жыл бұрын
@@jefffrey5794 It would be the same basic idea no matter what size pipe. Larger pipe diameters allow for dipping larger lures.
@jefffrey57942 жыл бұрын
@@justtinkering6054 I made one and tried it a little out of 1.5” because of the 2oz pro tec powder containers. I’ve never tried a fluid bed before until this one so I’m not sure how it’s supposed to look or act while it’s on or how much powder to put in the thing at once. It’s the same concept but I wasn’t sure if 2” would work better being bigger and more area for the powder to move
@TheOutdoorsman Жыл бұрын
Do you typically have a fluid bed for each color you want to dip or can you use the same bed for different colors, just have to clean it out in-between
@justtinkering6054 Жыл бұрын
You can clean them out. They clean out fairly well. I only use one color per bed though. I made a bunch of them.
@TheOutdoorsman Жыл бұрын
@Just Tinkering thanks so much! Is the pipe used 2"? I know the coupler is 2"
@davidstokes9252 жыл бұрын
How did you come up with that 3 1/4” for your filter? I was planning on useing 1 1/2 PVC!
@justtinkering60542 жыл бұрын
Trial and error. I tried a couple different sizes and that size worked the best for me.
@AddictedAngler3 жыл бұрын
did you try coffe filter paper
@justtinkering60543 жыл бұрын
I did not.
@xxvang3 жыл бұрын
I think that might work better for air flow. I just bought a set from TJ's Tackle but I'll make some containers with the coffee filter.
@justtinkering60543 жыл бұрын
@@xxvang I've been told that TJ's cups use a membrane that is the best thing you can use. I bought some from them, to try, about a year ago, but I never got around to it. I like my little cheapy cups pretty well.
@steelcitybullyz68433 жыл бұрын
Built it exactly like your and mine isn’t moving the paint
@justtinkering60543 жыл бұрын
Air leaks anywhere? Paint exposed to humidity and become clumpy?
@steelcitybullyz68433 жыл бұрын
No leak s. That’s was the first this I checked. Thinking the paint might be heavier. I’m using the tractor supply paint
@justinkosharek90003 жыл бұрын
@@steelcitybullyz6843 I had the same thing with my build today. When I opened my new paint there were clumps but I broke those all out. When in the cup there were holes in the paint and some fine dust making its way up in the air above the cup but no matter how I adjusted the valve it really did not work. Think I will try with a union and coffee filters next. Yeah it will cost more but hopefully it will work. If it don't I guess I will try a new thing of paint.
@erichadden773 жыл бұрын
Do you sell them..I work 6 days a week and dont get the time to make them
@justtinkering60543 жыл бұрын
I don’t sell them. Shipping would add a lot of expense. There are a few places you can buy them. Check lure making suppliers like Jann’s Netcraft or Barlow’s. There is a small supplier that has a following on KZbin. I can’t remember the name of the company but it’s a father/son company. Lots of guys really like their cups.
@morrowoutdoors1336 Жыл бұрын
So air flows threw the paper?
@justtinkering6054 Жыл бұрын
Yes
@kelseytcoleman3 жыл бұрын
Do you have a link to the valves on Amazon?
@justtinkering60543 жыл бұрын
I don't. If you search for "aquarium valve", you should find a pretty good selection.
@steveolsen35652 жыл бұрын
What size air pump are you using?
@justtinkering60542 жыл бұрын
Whisper 60
@LetsCrappieFish Жыл бұрын
Would you be willing to make me 5 and I can pay you through PayPal and you can send them to me? I'm just getting into powder painting jig heads. I'll pay for shipping too. Let me know brother. Thanks and God bless.
@rider660r3 жыл бұрын
Should have put the paper on the top piece,then you wouldn't have to take the valve in or out. I JB Welded my valve in (hot glue would work fine too),I also used a manifold to split air to 10-12 different fluid beds. I also saved a lot of $$ buying 1lb of powder for $10-24/lb instead of that overpriced "jig special" powder.....LOL they're no different,it's the fool believing the marketing bluff they feed ya.How much is that "special" powder per lb....remember 16oz/lb.. LOL They're 1000's of colors also..
@marshallhooven94603 жыл бұрын
What powder did you buy at that price?
@rider660r3 жыл бұрын
@@marshallhooven9460 MIT Powders and Prismatic Powders. Prismatic has over 6500 colors alone,not including what combos you can come up with.
@cgale92 жыл бұрын
sussy baka fortnite meme mario cart funny
@hankwilliams30632 жыл бұрын
Covid 19
@whitlanders2514 Жыл бұрын
Can you share a link for the valves or tell me what they are called on Amazon? please?