Cheapest SEMI Wheel Conversion on YouTube? Small issue with the Setup

Рет қаралды 24,326

Күн бұрын

Пікірлер: 21

@RyanWalkup Жыл бұрын

Just a thought. If you were to have had a steel wheel on the inside they are much thinner than aluminum wheels mated together and that would allow for the lip of the adapter to catch the outside aluminum wheel completely and fix your issue if I'm not mistaken.

@franksalazar4466 11 ай бұрын

You can’t mill a steel wheel since they are thinner that would only work if you run a 22.5 tire and not a 22

@johnson7454 3 жыл бұрын

Look into centering lugs front and back. You only need 3 per wheel it makes a triangle shape. The fronts are shorter then rears. I ran this set up with spacers on 24s and 37s. Also balancing rings are way better then any balancing a shop can do

@AllThingsBoost 3 жыл бұрын

I'll check it out. I actually found the issue, jacked the rear end up and noticed one tire had a lump, probably out of round from factory, so that's what I was feeling. Waiting on it to get resolved via warranty before posting a video on it. I've not heard of balancing rings, I'll look into them. Thanks

@8076alina 2 жыл бұрын

the factory torque spec for these wheels are 500ft lbs but i dont know if those adaptors accommodate for that or not just a little advice

@chadlevelle4297 8 ай бұрын

Did you have to mill down the rims

@sarahdragan6234 3 жыл бұрын

Love the video 🥰

@fernandoguerra9783 7 ай бұрын

Maybe someone asked and you already answered.. Where do you buy those adapters?

@AllThingsBoost 7 ай бұрын

I got mine used, but they are made from a few companies. Dually king industries and wheelsamillion, both make them. I believe these were dually king brand

@Camlynn0503 2 жыл бұрын

Is your truck lifted any?

@AllThingsBoost 2 жыл бұрын

Yeah, 3in front, 2in rear. Check back in the playlist for this truck and you'll see what I did

@Camlynn0503 2 жыл бұрын

@@AllThingsBoost ok thankyou sr I've been thinking about doing this to my squarebody

@Twobarpsi 3 жыл бұрын

Truck looks amazing!!

@nelsoncurley920 2 жыл бұрын

Do you need a leveling spacer before you put on semi wheels on dually?

@AllThingsBoost 2 жыл бұрын

A 4wd truck, no. A 2wd truck, I have a 1.5" spacer on that picked up the front end 3". I can't see them fitting without some kind of lift.

@krazyhouseperformance 2 жыл бұрын

Question? What size are the tires and how much did it effect the ride quality?? More aggressive or about the same smoothness??

@AllThingsBoost 2 жыл бұрын

I have quite a few videos on the issues I went through and the size. But they sucked. Get a top tier tire or avoid this setup.

@jeramyperez7067 2 жыл бұрын

Can you please add a link for the machine shop that milled the wheels

@AllThingsBoost 2 жыл бұрын

I don't know the actual shop by name, I contacted a company on FB "Wes Cone Customs" dropped off my wheels/tires and paid him. He did the leg work to get them milled and mounted locally out of Indiana.

@RobertCowden-y3c 8 ай бұрын

Put 4 golf balls inside the tires to balance them they make a regular tool to put on there you can have a bent wheel all so but the cheapest and best way is to use golf balls