How to replace a muffler and tail pipe

[@Hip-Gnosis1134]

Honestly I think the most impressive part of these videos are the camera angles getting all the action. That takes some work in itself

[@cheapwheels9828]

Thats the job.

[@josemtz4517]

At around 7:05 you answered the question I've always wondered. Guess one doesn't need to be a welder to attempt this! Thanks man super helpful! I hope I can fix my Mustang now.

[@saginawdan]

A nice thing about living in the woods.... you don't have to worry about someone stealing your catalytic converter. 🌲🤪🌲

[@cheapwheels9828]

So true!

[@Purpz710]

Except Smokey the bear

[@LSDmac]

You'd be surprised

[@saginawdan]

@Dmac 2J Well, I have two German Shepherds that make that decision.🤣

[@JerrySpann-fn4kw]

The reason people steel catalytic converters is that they believe that it will convert their Ford into a Cadillac. Also, some people believe that the Hazzard button on their car will turn their vehicles into the General Lee.

[@davekibbey7944]

Good idea on those ear plugs. I've dug more rust, slush and mud out of my ears more times than I can count. Should've thought of that years ago. Thanks for the idea. P.S. It's good to see that nobody stole your catalytic converter.

[@cheapwheels9828]

thanks.....no joke on the cat. It was shocking to see the muffler cut off but the cat still sitting there

[@kevola5739]

@@cheapwheels9828 -Maybe some thief could not tell the difference between a muffler and a catalytic converter.

[@jeffersonspace]

Late sleeping neighbors all throughout the western hemisphere are applauding. Author! Nice video lesson. Bless

[@cheapwheels9828]

Many thanks!

[@rabidbeagle]

You can purchase exhaust systems online. I replaced the muffler back on a 2002 Tacoma for $65 delivered vs. $400 at the local muffler shop. Just cut the old one off and slide the new one on. Excellent video.

[@cheapwheels9828]

Thanks for the info

[@AB-dl1hz]

Why are you explaining what he just did in the video????

[@randypatrick4421]

I know it’s been some time since you posted this. I’m fixin’ to replace the exhaust on my 2003 tundra. I’m curious about where you made the cut? I’d like to avoid needing a short piece like in the video if possible. Thanks!

[@bobbalbirnie2478]

Great job Dave! A comment though, if you notice at the back end of the catalytic converter there was a broken off support from the truck frame that was meant as a support for the exhaust system that still needs to be placed and you will also notice a mating groove in the bottom of the exit pipe from the catalytic converter where the support mates up. You might be able to pick up that part from the auto wreckers. Take care, Bob

[@cheapwheels9828]

Thanks. I'm aware of it..but I didnt cover it in the video. If I cant find the part, there are several good places to improvise a hanger.

[@MNSkeetFamily]

My favorite “new” channel on KZbin. Super practical stuff. My 1993 F150 sure needs some TLC. Only has 115,000 miles on it, but she has some rust...especially when we are talking about the exhaust.. We paid $2200 for the truck. Looked at new and it was a bit more than that :)

[@cheapwheels9828]

I appreciate that.

[@BadViolinPlayer]

Man, where was this video when I needed an exhaust a year ago! I was in the exact same boat with a C10 I picked up for $800 bucks, and unlucky me spent $400 on an exhaust that woulda done exactly what yours did. Live and learn.

[@cheapwheels9828]

sorry

[@pauldean9625]

Thanks, I'm replacing my 1993 bronco exhaust. Someone in the past put a mean sounding muffler in, I am tired of load so I'm following your video. Thanks Paul

[@cesarmoreno5996]

my comment is a CAUTION to the car owner..... you go to a shop, and ask for a new muffler. The SHOP GUY is only focused on cutting off the old muffler, selling you and installing for you a new muffler. If you can be positioned kind of close to the shop area, keep an eye when the guy uses the cutting torch to cut off the old muffler. He will cut around the tail pipe, and will probably not cut thru all the way.... but he is not worried. Because he has a big metal mallet, and just bangs on the rusty muffler until it falls off. Sounds simple.... he installs and welds the new muffler and off you go..... but a few days later, you smell smoke or hear extra, different noise coming from your engine. That is because when the shop guy banged on your rusty muffler, the pounding caused a break or a crack at the engine side (on the EXHAUST MANIFOLD) that connects to the exhaust pipe that leads to the catalytic converter or to the muffler. So before the shop guy starts, tell him, use the torch but dont bang the heck out of my rusty muffler (just say: the last time I changed the muffler, the guy caused a crack in my exhaust manifold........

[@GENX80.]

That's just cause you had a bad mechanic

[@malipezy]

@@GENX80.every mechanic could be bad ya don’t know, most knowadays tryna rip people off as fast as they can

[@GustavoSantos-ep5jx]

I just do my own, but good advice I think

[@MapleMarmite]

Good timing there - have to go in to pick up a muffler and tail pipe for my ‘89 F150 tomorrow. A job for over the Easter weekend, I think. I did a patch job on it last year and it’s pretty much only the patch that’s left now lol. Going to be doing a lot of the jobs you have to freshen mine up this year - I have an 8’ bed with a high rise cap I have put back on to make a camper for trips this summer. Might even video the process - never done videos before, though. Worth a try, I guess. Thanks for the uploads 👍🏻

[@cheapwheels9828]

Give it a shot....its pretty enjoyable

[@davidjones8680]

Another great job well done Dave. I recently caught two guys red handed in the process of stealing my catalytic converter at 2am. I won't say exactly what happened to them while we waited for the cops to turn up, . Turned out they had 17 other stolen cats in the back of their vehicle. D in the U.K.

[@cheapwheels9828]

give them the biz!

[@leonbeausoleil1542]

Dave, You seem to anticipate all of the problems my 2010 Ford Ranger is beginning to have. Now all I have to do is get off my butt and get them done. I'm not a spring chicken anymore so at times it's hard to even get down on the ground. But I am really enjoying your very instructional videos. I was able to put a new tailgate handle in when the old one broke recently. Enjoying both of your channels and was posting previously under the name "Axelbrode".

[@cheapwheels9828]

Thanks

[@NeelCole]

Dave, thank you for this VERY informative video. I’m about to put a Black Widow Race Venom on my 2011 Expedition. Can’t wait!!! 😎

[@zeddist7472]

Great video, came here as I have to replace my own exhaust with no idea whatsoever how to do it and this video makes for a great tutorial on how to approach that task.

[@cheapwheels9828]

Glad you liked it!

[@kerahs55]

Thanks for the video! You made it clear and concise! I have a pretty clean edge on my pipe and it the muffler and tailpipe should just slip right on, just have a rusted clamp in the way I need to figure out how to get it off . Better paying $150 than what was quoted at a shop for $800! PIRATES!

[@justkev8250]

Welp off to buy some clamps. Thought I'd have to take it back to the shop for them to weld it on again. Thanks for the vid!!

[@jackirichard414]

Thanks for all the great tips on replacing the muffler and tailpipe.

[@cheapwheels9828]

Glad to help

[@lucasyoung9782]

Another Great Video Dave, Could you post a video how to change your air filter or fuel filter. Thanks

[@cheapwheels9828]

Yes I can

[@DirtyDanMunicipalMan]

I have a love hate relationship with exhaust. I hate doing it but I love seeing shiny new pipes go in whether it’s a stock replacement or a performance system.

[@sturetrandans3747]

A little Exhaust Mounting Paste right from the start makes the whole thing much easier and more likely to hold tight.

[@scottsmith6846]

Hey Dave thank you for this older video I thought they all had to be welded but now I know that they don't have to be and if I need to do a muffler I could do it myself now too thank you Dave

[@lindahobbs5545]

Great video! Have a great week Dave!

[@cheapwheels9828]

Thanks! You too!

[@raylaylin4229]

PB Blaster and a large pry bar or crow bar works wonders on rusty rubber exhaust hangers. Great video and a much needed channel!

[@cheapwheels9828]

Thanks !!!!

[@samanthafranklyput]

This video was exactly what I needed- really appreciate your work on it!!

[@nickmcfaddin4443]

Liked solely for the 3-N-1 oil and channel lock bushing trick lol not that there isn't much more great info, just because that's been my bane in the past Keep up the good work!

[@cheapwheels9828]

Thank you!

[@alanj7306]

Dave, another great video! Wish you showed us how it sounded before. That’s some fine work and sure looks nice. You can’t beat a new cat-back exhaust for $70. My friend, blessings to you and yours!

[@cheapwheels9828]

Thanks

[@kikoyyoutubetv8206]

Great sharing sir watching from Canada 🇨🇦 soon I'm going to replace my muffler on 1990 Ford F150 4.9L Engine

[@heinrichnitschke5485]

Hey Dave great video. Can I make a suggestion? Do a before and after. I'm sure that truck was loud before you put the exhaust on. Keep up the great work. Loving the new channel.

[@cheapwheels9828]

you're right

[@alanj7306]

I wish he would do the before and after also. Would have been easy to do with this one.

[@MrJonrocker]

Messing with mufflers. Almost as much fun as replacing rusty brake lines. Cheers Dave!

[@cheapwheels9828]

yeah.....loads of fun. LOL

[@MM_in_Havasu]

Lots and lots of WD40 or penetrating oil on those muffler hangers. They can be a PITA. You got it handled just fine, great job!

[@cheapwheels9828]

Thanks, I like the AZ flag pic........I was in Flagstaff this afternoon

[@MM_in_Havasu]

@@cheapwheels9828 cool! They should still have some snow on the ground up there.

[@cheapwheels9828]

we drove through the snow the other day...started in Tucson...and headed north hit snow around Strawberry

[@MM_in_Havasu]

@@cheapwheels9828 we have a small place in Show Low, AZ in the pines, very nice there! Our primary residence is in Lake Havasu City. Safe travels to you & yours.

[@joeymanczuk8022]

Just a tip from mechanic to mechanic, when installing exhaust clamps. Install them at a angle so they are less likely to snag anything you may run over ( like a plastic bag)

[@cheapwheels9828]

Good tip

[@thomasscaria01]

Excellent

[@Bianchi8000]

I'm really liking this new channel, Dave. All just very interesting - I can now see why Guys like to fix up old cars. It's like cooking - very satisfying to see the final product. Be Well, Dave!

[@cheapwheels9828]

It sure is.....its empowering to fix your own stuff. For me it used to be a have-to thing.....now I generally dont have to fix a vehicle sunday night in the snow to drive it to work monday morning

[@MyBackyardScience]

Thanks Dave! I'll be helping my son with the exhaust for his F150 very soon 😀

[@WolfEntertainmentLLC]

I had no idea a muffler replacement was this easy!!! Thank you for the video!

[@muffs55mercury61]

On a truck it's not bad since you can crawl under there but on a car you'll have to jack it up or get ramps.

[@grimgargoyle7173]

I'm crawling under my 91 E350 this weekend. The shop suggested a new exhaust and said it was barely hanging on. I'm not a mechanic, but I'm sure I can do it. Thank you for making the steps look easy

[@thewizdad]

Thanks man! I bought a Camry and the muffler was handed to me in a garbage bag. I bought the gasket and cleaned the flanges and bolted it up and hung if off the mounts again. Kid we bought the car from thought iit sounded better With no muffler. 😂

[@pilgrimcarolee7294]

Thanks for keeping these beauty's on the road!!! --z ---😀

[@cheapwheels9828]

You bet!

[@pilgrimcarolee7294]

I have a 1979 Cobra Motor Home Been broken down for 4yrs. Easy fix but no one will let. Me hire them to fix it. Cost less than $100.00 in parts . I will.be 78 next month and I don't look forward to another Hot. Summer over 100. It's a 120 inside my R.V. all Summer till after Halloween. When gas has been left in t he tank for 4yrs how do you treat it?

[@pilgrimcarolee7294]

Sorry my phone no good

[@johnthompson5792]

Good stuff Dave,,, be well out there!

[@cheapwheels9828]

Thanks

[@muffs55mercury61]

Awesome. It's more difficult with cars as they either need to be jacked up or put on a lift to get to them. I have a car that will need an exhaust system. Fortunately there are several manufacturers that make exhaust systems for classic cars that are ready made to fit if they are stock. The biggest problem is getting the head pipe off the exhaust manifolds without breaking the studs. I just don't trust Midas with my old vehicles.

[@edbenson98]

Another great DIY auto repair that saves time and money!

[@cheapwheels9828]

Thanks

[@tomstoothrememberinggarysn1813]

Hey dave where did you buy the tail pipe ?

[@Jayden-h7h]

Great video, man! This is gonna help me out a lot

[@joelhuppe3725]

Man a few years ago I was travelling and my muffler fell off on the highway...far from home and no tools and didn't know much mechanics back then. Drove a bit got pulled over by cops threatened with ticket for excessive noise said I had to fix it. Had to go to a garage ended up costing 800 Canadian. Did I ever get ripped off eh aha. Anyways appreciate the videos 😁

[@cheapwheels9828]

Thanks

[@davidoram4785]

Thanks Dave - will need to do teh same job on my ute - very helpful

[@olympusentertainment2638]

Thank you sir, we do appreciate these types of videos.

[@cheapwheels9828]

My pleasure

[@pepawg2281]

I can remember "fixing" a separated exhaust pipe using a soda can, muffler tape, and two clamps! Curbside mechanics 101!!!

[@cheapwheels9828]

right on!

[@kirkkibbey1347]

soup cans last longer lol

[@ZarchonisSpire]

Made it look easy. I love this. My weekend project

[@Loompius]

Awesome video, good editing. Couldn't be any better.

[@cheapwheels9828]

Thanks

[@kylec166]

You could also use a racheting box end wrench works as well

[@cheapwheels9828]

right on

[@HitmanChase]

My bronco was rusted just like that. I just straight piped it. Good video

[@cheapwheels9828]

right on

[@haydnjenkins7607]

With 20+ years in tyre exhaust fast fitting, we never took them apart we cut the rubbers and gas axed the pipes, the refitting was all new rubbers and clamps, time was money, we alway included it in the price, nothing worse than customers coming back because an old rubber let go, usually we didn't do part systems. And we always used firegum paste on every joint belt and braces. But good work,

[@cheapwheels9828]

Great points.

[@gavanlee]

I love the truck and the new channel! 😎

[@cheapwheels9828]

Thanks

[@MiscMitz]

I am really enjoying these videos. You are very detailed. Thank you Side note, the new phone is in the mail and I'll be able to catch up.

[@cheapwheels9828]

Right on. Thanks

[@martylaughery9138]

Almost 7,000 subs!! Steady growth!! Keep those great videos coming, Dave! You’ve got a great niche in Cheap Wheels. If you make the videos, they will come.Thank you. ❤️👍 Did you manage to do a whole video without your faithful sidekick, or was she just off camera this time? Love you guys. ❤️😘🙏🏼 God bless you all and keep you safe.

[@cheapwheels9828]

Thanks !

[@KillingerUSA]

Another excellent job Dave! Exhaust and brake lines are my least favorite.

[@cheapwheels9828]

Mine too!

[@BrianJonah88]

Great information. Great video. Excellent editing. Thank you! Does it not matter to clean up the rust on the gnarly end coming out of the cat? I'm surprised that seals up, but I've never done this.

[@lewismitchell5367]

I would install the clamps with the thread towards the top. A ratchet wrench is perfect for that.

[@localtruckergeorge9277]

Appreciate you brother, very encouraging to do what can your self and save money. Showing us we can do more than we might know.

[@cheapwheels9828]

thanks

[@judcarter86]

Honestly just saved my ass I'm going to the scrapyard for a muffler tomorow and get some clamps and a sleeve and fixing my car myself save me some money and get some power back in my car:) thank you for the video

[@cheapwheels9828]

you bet

[@9252LIFE]

Great video!

[@cheapwheels9828]

Thanks!

[@frankbennett3676]

Another banger Dave. Nice work

[@cheapwheels9828]

Glad you enjoyed it

[@erikag2598]

Another awesome job, Dave!

[@cheapwheels9828]

Thank you!

[@shanewilson765]

Another nice one Dave. Please keep up the great videos

[@cheapwheels9828]

Thanks, will do!

[@ronniefoster5099]

Nice job. You made it look easy. As hard as I try, even with googles on, rust always seems to find its way in eye. 🤣

[@cheapwheels9828]

Very true!

[@greybeard5774]

If you don't weld, then you might want to make 4 longitudinal incisions in each connection under the clamp .. it's usually darn hard to squeeze the pipe .. these cutouts will help to make and keep the connection tight much better.

[@cheapwheels9828]

thanks

[@Dan-q3y]

I love the ending. "Keep your junk on the road"....and i am. As long as i can lol.

[@phenorahtickle2481]

Thanks, I'm fixing to replace my whole exhaust on my Chevy G20 Van, this helps ! Definately wearing ear plugs. LOL

[@DeuceDeuce80]

Excellent content. Thanks for uploading.

[@cheapwheels9828]

my pleasure

[@brianmilliard6998]

Work from the existing exhaust system to the rear end, way easier.

[@SheCat1964]

Can someone please direct me to where i can find a way to replace my broken off right at the muffler tail pipe? The place i went to for another repair said it would cost me $600 for a whole new muffler. My muffler is still fine, its the exhaust tail pipe i need to fix on a 2009 nissan versa. Its melting my damn bumper. I cant find help anywhere and i do not have $600.

[@ufobuff4173]

Awesome nice job on those camera angles and the work Dave 👊

[@cheapwheels9828]

Thanks !!!

[@howtodoitdude1662]

Question: shouldn’t ALL the pipes go into each other front to back to prevent turbulence? Or it doesn’t matter?

[@scottt8424]

Hey Dave thank you for the video I enjoyed it and I didn't know it was that easy to do it so eventually one day I'll get to mine too but mine is pretty good just that's it is bent when the guy took my truck off the flatbed beings that my truck is packed with all my stuff in it when he took it off it was so low the back of the truck the muffler bent I just hope that's he did not crack my engine block in the process

[@cheapwheels9828]

no kidding...

[@david2odo]

Yes! The CT special. 😎👌

[@raequanmosley8258]

Hello Dave. On my F250 the last hanger in your video that you forgot about, mine has broke in half off. How do you get that rubber hanger to come out if that happens since it seems to be trapped in place unlike the other ones?

[@stephenlarsen2721]

Dude this is very helpful!

[@cheapwheels9828]

Glad to hear it!

[@alicefink1092]

Dave, would you do a how to vid on how to change body mounts on a chevy s10 if your able to please?.. love the video, im no stranger to muffler/exhaust work lol.

[@cheapwheels9828]

I dont have it on the books...but maybe someday

[@alicefink1092]

@@cheapwheels9828 ok cool, looking forward to it someday hopefully.. thank you Dave

[@alicefink1092]

@@cheapwheels9828 i used to own a f150, had to replace all the brake lines, ugh what a chore lol. Wouldnt have been so bad if i hadnt had to make so many trips to the part store but you live and learn lol. It was the first time i experienced that mess but now i know to buy all the parts the first trip if having to do it again.. great vids by the way..

[@Mike322UNGA]

Thanks Dave from cheap wheels.. appreciate it!!

[@cheapwheels9828]

No problem 👍

[@hardwoodharry6364]

Great stuff Dave well done

[@cheapwheels9828]

Thank you kindly

[@therealestake]

Excellent video. Of course, $30 is now worth $14 and the tailpipe is the same. An unsolved mystery!

[@williamschlosser77]

The new muffler has arrows pointing to an A, and a B. Which end goes forward?

[@MrGeroth]

This brings back memories.

[@cheapwheels9828]

right on

[@bobjoncas2814]

...good one, stay safe..

[@cheapwheels9828]

thanks

[@JeffWinter1]

OD, ID...E,I,E,I,O...😂

[@cheapwheels9828]

LOL

[@JonOffgrid]

cool dave i did,t know yea did cars too cheers

[@jasonwilliams4390]

Would narrow band clamps work instead, especially on an aluminized steel slip fit exhaust without slots? I've got saddle clamps, but I may need to replace some parts at a later date.

[@cheapwheels9828]

why now use exhaust clamps??

[@johnjauregui3528]

Ground your exhaust system at a clamp bolt then to the chassis, if you like the whole thing to corrode less and last longer.

[@anonymixx8106]

Curious what you think about putting some super high heat liquid exhaust weld inside the pipe where the clamps are going on, right before tightening. Unnecessary trouble for later, or extra beneficial precaution?

[@JesusGodHolySpirit3]

oh my gosh did you get your Tetanus shot before working on this project ?

[@robineniffer5578]

I always use a heat compound on the joints .a better insurance against leaks

[@cheapwheels9828]

good idea

[@luisponce1472]

You should have Sanded that Rust off the Muffler before putting in the New Pipe in 😊

[@Twitch_Moderator]

The truth is, using clamps you don't get a 100% airtight seal, so it shouldn't make a big difference. The idea is, you want a quiet ride. And hopefully, no exhaust fumes in your cab. LoL!!

[@alcc4964]

I noticed the pipes didn’t fit very snug before you put the clamp on. Have you noticed any leaks since install? Thanks

[@hanyou23]

The muffler guy that put on my muffler put a clamp on but exhaust is coming out between the old pipe and new (between the muffler and catalytic converter, at the clamp)... is that supposed to happen (I assume not)???

[@richroc7]

I’m in a city but idc I’ll work on the curbside however I have a 2007 pathfinder and idk if I can use clamps or not. I’m hoping it doesn’t have to be welded but I know it connects to the cat and a mid pipe that crosses over from the driver’s side. Muffler is $120+tax.

[@jackirichard414]

Can you do a video on doing your own oil change.

[@cheapwheels9828]

yup

[@woodsmanforlife1677]

Excellent! Thanks for sharing!

[@cheapwheels9828]

My pleasure!

[@JamesWicker-ps4gq]

I remember when you could buy a complete bolt on exuset system at your local parts store

[@Tomcat71]

you also installed the muffler hangers back on upside down. the shield faces the muffler.