CHECK THESE PARTS BEFORE THEY BREAK! S550 Mustang IRS Suspension and Drivetrain part inspection.

Periodically check these parts so that you are not breaking suspension and driveline parts!
kelltrac.com/

[@MustangGuru]

My vertical link bolts have bent slightly.

[@nicklausobryan3481]

this is some good information. thanks!

[@robcasey6170]

Man am I glad I found this channel!!👀

[@tylerolson5860]

This is great! When 900-1000hp is the norm and eady to do now weve got to figure out how to make it survive! Thanks!

[@larryhensch2280]

Good stuff Kelly it's almost a full time job but enjoy it thanks bro

[@michaelstallings2822]

Great info as always thanks!!

[@ChristopherMikol]

Nice I usually do a once over before i goto the track. Nord-lock washers work great on the axles hubs as well.

[@cyclonekevin6199]

Thanks for the video, I daily drive, my V6 Mustang I have 75k miles. It does make Some sounds in the rear. I definitely check it out.

[@lobbyrobby]

Thank you! I bought a 2020 gt pp1 and I want to try tracking it someday at a HPDE. This is the stuff I need to learn. I'm going to sub to you. Torque on the half shaft bolts?

[@Thedjcodeman]

quick question. If you had installed the cradle lock out or support, would this alleviate the front and rear diff bushings? possibly saving them?

[@HeadBassVTEC]

my left rear bearing went kaputt last month, wonder if it was because of the bolt coming loose (I never checked them when I had the wheels off)

[@kevinking5406]

Just purchased your big bertha bolt kit for aftermarket diff bushings. Do you recommend a particular brand?

[@HeadBassVTEC]

I have a similar crack in my diff bushing....since the OEM ones cannot be bought and I don't want solid bushings what should I do? Is installing the BMR bushing braces over a cracked bushing ok? someone on forum was recommending some polyurethane glue they use for windshields (3M 08609) for repairing the crack and also for filling the holes in the bushings

[@kessel921]

Interested to see why you dont just use the solid BMR diff bushing deletes

[@allensautorepairandperform822]

Because its noisy as hell most likely.

[@macsupforfun]

I think the spec on that axel nut is 204 ft-lb

[@Phantomas2011]

Hi there How many lbs per foot on the hub Knut 😀? 210 GOOD INFO

[@shawnsitter5390]

What about a double nut on the axle?

[@LozanoMotoRacing]

Watching this whole video to find out what could’ve caused these problems so prematurely till you said it had 1,000 HP. That’s what’s causing the problems

[@GetAGoodFeeling]

I moved, then broke a rear diff bolt on a standard car with 2100 miles on it …😮

[@lizoyd18]

I just bought my car and it's clicking going in reverse and forward

[@Thedjcodeman]

axle nut