Cherry Burl Hollow Form - 4 Ways Collaboration

I demonstrate turning a small hollow form of cherry burl. “If it won’t hold soup, it is art!”
Watch the other "4 Ways" collaboration member versions of a small hollow form project by clicking on the links below:
Richard Raffan • Richard Raffan turns &...
Sam Angelo • Small Hollow Form----F... Richard Raffan
Tomislav Tomisec • Enclosed form _____4Wa...
If you find my videos helpful, you can buy me a virtual cup of coffee with this link. www.buymeacoff...
As an Amazon Associate I also earn from qualifying purchases from my Amazon shop www.amazon.com....
You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website www.mikepeacew...

[@oltoddilocks]

That new powermatic is dreamy!

[@MikePeaceWoodturning]

Best midi I have ever turned on for sure.

[@kengunnell6398]

Love how you showed off the imperfections and use and note them at the beginning

[@MikePeaceWoodturning]

Thanks. A fun turn that turned out even better than I hoped for.

[@RichardRaffanwoodturning]

Great to see two approaches to not disimilar bark intrusions: you go through where as Sam doesn't. Just what we hope for in a 4-Ways project.

[@garthkeck2003]

😂Another beauty. Well done

[@oldgeezer1746]

Cherry is a great wood.

[@josephpotterf9459]

Thanks Mike

[@jackthompson5092]

Beautiful hollow form Mike.

[@MikePeaceWoodturning]

Thanks 👍

[@johnnyb95678]

Great approach and it turned out beautifully.

[@MikePeaceWoodturning]

Thank you very much!

[@jeanlong4285]

Beautiful vase

[@MikePeaceWoodturning]

Thank you so much 😊

[@georgekabacinski]

Very nice, Mike.

[@MikePeaceWoodturning]

Thanks, George.

[@glencrandall7051]

Very nice piece of work Mike. Classic shape. Love the bark inclusion. Thank you for sharing. Have a great day and stay safe.🙂🙂 Now on to the other three.

[@MikePeaceWoodturning]

Thanks 👍

[@randywood4782]

Good job Mike 😊I like Thanks

[@MikePeaceWoodturning]

Glad you enjoyed it

[@tomislavtomasicwoodturning]

Great job Mike, love the see through inside feature on the wall of form

[@MikePeaceWoodturning]

Thank you. I was very pleased how it turned out.

[@gregwilsonnaturephotography]

Beautiful Mike, when I become a better turner,I am going to give this a go. Greg

[@MikePeaceWoodturning]

Best of luck!

[@gregdownunderinOz]

Great job Mike, always enjoy your videos, very instructional and you always show great tool technique and control. Thanks for sharing. Can you do a 4 ways using a piece of square plank timber about 30 mm thick. Can be cut and glued no segmented bowls, turned objects only with emphasis on using as much of the timber as possible and only from that one piece of timber. Creative designs. Finish of your choice. This was similar to a recent club challenge we had.

[@MikePeaceWoodturning]

Thanks 👍 I can bring up to the group.

[@curtisalliston8958]

Thanks!

[@MikePeaceWoodturning]

Thank you very much, Curtis!

[@MarklTucson]

Very nice piece. That burl has some very nice figure. Really enjoyed watching your approach to this month's 4-ways project. Now off to watch the other three.

[@pjseiber2774]

Beautiful piece and great talent ❤

[@MikePeaceWoodturning]

Thank you so much 😀

[@ivanbukh7576]

Красивая вазочка! Хорошо , что оставлены следы короеда, они дают целостность картины!

[@lutzvogt6362]

Very beautiful piece Mike, however sometimes handling was tricky but the result is amazing 👍

[@MikePeaceWoodturning]

Yes, thanks

[@kenvasko2285]

I think your design really compliments the beautiful wood. Gorgeous piece. I love working with black knot but it can be challenging. Love the included bark feature. Nice!

[@MikePeaceWoodturning]

Thanks, Ken. I think this is now my favorite hollow form.

[@kenvasko2285]

@@MikePeaceWoodturning I can see why it is your favorite. It checks all the boxes. You should be proud!

[@valeriehenschel1590]

Love the choice of wood for adding interest to the final item. Do you ever incorporate the tenon as a stylish foot rather than cut it off?

[@MikePeaceWoodturning]

Yes. Incorporate so it does not look like a tenon.

[@jorisdemoel3821]

That is a very nice hollow form indeed. It remains very interesting to see how the four of you create such different things from the same general idea. Do you have any safety/handling tips on not getting your tool caught in all the gaps and hollows? Did you have a reason (other than aesthetic, it looks awesome) to go with a hole rather than retaining the bark? Thanks for another wonderful video!

[@MikePeaceWoodturning]

In this case it was esthetics. I saw the possibility and went for it. If you are turning at an appropriate speed and using a sharp tool reiding the bevel, cutting air is not a problem.