Chester Spier cleans up and shows how to use the Stanley scrub planes, the 40 and 40 1/2.
Пікірлер: 20
@norm578510 күн бұрын
Thank you for sharing great scrub planes
@christopherweber33733 ай бұрын
Thank you for the information.
@lawrencedeleurere4427 Жыл бұрын
Try using a cambered iron of maybe 8 inch radius with a number 6 Bailey, especially on sawn boards. You'll get a wider cut and more jump over the valleys. I personally think that modern hand tool workers misuse scrubs. Where they excel is on board edges to remove an inch or less of material to get to a particular width while the more traditional 'fore plane' is better for flattening faces.
@scott8351 Жыл бұрын
My 5 1/4 is my scrub, it works great, is easy to adjust, and is light. I havent tried the 40 or 40 1/2. I didnt know there was a 40 1/2. Great info as always, thank you for sharing.
@ChetSpier Жыл бұрын
Thank you.
@choffee Жыл бұрын
Great video. Thanks. It was good to see them in action. Looks like you where enjoying seeing the chips fly as well :)
@ChetSpier Жыл бұрын
Thank you and yes. I did enjoy them.
@athmostafa2462 Жыл бұрын
Thanks for sharing , scrub planes are really a benefit to have , I followed Paul seller converting a #4 stanely plane into one works like a champ.😊
@jamesharris7868 Жыл бұрын
Awesome video Chester I have the 40 except my cap is solid brass.The cast metal breaks quite easily and are hard to find.So a bit of milling and it’s fixed
@ChetSpier Жыл бұрын
That makes total sense. That is an issue with them as they really require a good amount of force to keep the iron in place. If I had a mill I would make a couple before the originals break. Good idea and thanks for watching.
@derekdolecki2759 Жыл бұрын
Great video
@ChetSpier Жыл бұрын
Thank you
@dmohr02 Жыл бұрын
Good info, Chester. I have both a 40 and 40 1/2 and enjoy using them. I did not know about the handles and the different eras. Both of mine are beech, although it looks like the 40 was stained a rosewood color by a previous owner.
@ChetSpier Жыл бұрын
Thank you kindly.
@richardbutterfoss2353Ай бұрын
Thanks! RWB ❤🎉
@ChetSpierАй бұрын
Thank you.
@FOTOMONTAJESPERU6 ай бұрын
EXCELENTE THANKS.
@skippylippy5479 ай бұрын
I have a relatively new Stanley #5 low angle jack plane. It has an adjustable throat using a sliding front shoe. Can I purchase a cambered scrub iron for this plane or do I have to make my own iron for scrubbing?
@vitaliy_om5 ай бұрын
Buy a separate plane for quick removal - Stanley 40. Instead, you can use a regular Stanley 5, making a radius sharpening on its blade. When roughing wood there is a lot of dust, sand, etc. - the plane wears out greatly. Take care of your Stanley 62.
@skippylippy5475 ай бұрын
@@vitaliy_om Thank you. That's good advice! 👍 Much appreciated.