No video

SkyRC MC3000 - The most intelligent round battery charger!

  Рет қаралды 22,548

Cheule's Flashlight Reviews

Cheule's Flashlight Reviews

Күн бұрын

Пікірлер: 99
@gkcamden9050
@gkcamden9050 5 ай бұрын
Dude. That was awesome. I’ve watched a few other videos on this charger, and I would get frustrated and shove the thing back in the drawer. I watched your video and feel like someone just turned the light on in the room, and now I love my MC3000. Thank you! Subscribed
@cheule
@cheule 5 ай бұрын
Glad you liked it!
@FutureSystem738
@FutureSystem738 6 ай бұрын
Thanks so much for this summary- best I’ve seen. I have just received my charger, so now I’ll have to learn to drive it. Very happy so far, and the BT phone App seems really great too. My initial impression is that this is the best charger out there, (even if the manual is a little bit hard to understand.)
@108CAM
@108CAM Жыл бұрын
I fell in love with my charger instantly. It does everything I need plus a little bit more.
@Bob_Adkins
@Bob_Adkins 11 ай бұрын
I have the SkyRC B6 battery pack charger to charge packs and also use it to charge individual cells. I will be right at home in the "advanced" menu, it reminds me a LOT of my B6. Great review, thanks!
@cheule
@cheule 11 ай бұрын
Very cool
@JayP7.62
@JayP7.62 Ай бұрын
Mine came in an hour ago and I already LOVE it! Advanced is super simple. Didn't read the instructions at all and had no problem setting it up for my first charge. I do need to do a little fine tuning on the termination setting. Definitely love the bluetooth. The only other "smart" charger I have experience with as far as round cells is the xtar vc4sl.
@Stan-mh7bf
@Stan-mh7bf 2 жыл бұрын
It's hard to comprehend that I can get this at 120$ in 2022. This is absolute hig-tec cutting edge stuff. Thank you Sir for this great review!
@Boz1211111
@Boz1211111 Жыл бұрын
Thats expensive af for me but i still cant write it off because it looks amazing
@Aengus42
@Aengus42 10 ай бұрын
That was a perfect light introduction & overview, thank you! If I was stuck in a field with it with no user manual I could now charge any battery that fits just from your video. I'm just about to unpack it, check the firmware is up to date and use it for the first time. Nice one mate! Much appreciated 😎
@cheule
@cheule 10 ай бұрын
Glad it was helpful!
@gd.ritter
@gd.ritter Жыл бұрын
Charge termination for Li-Ion / LiPo isn't a voltage dip. It's how low the constant current gets for it to consider it full. At first, an empty cell will take the maximum programmed current at the full capacity voltage level. You can imagine the voltage (of the cell and the charger) as a water level. Water just flows with gravity from high to low. The bigger the difference, the faster it flows. As the cell voltage approaches the maximum setting, the current slows down and will gradually trend towards zero. It's not safe to forcibly hold the battery at its max voltage if you leave a cell on the charger so it needs to pick a cut-off spot to decide it's done and disconnect the cell. The standard default for this is 1/10 of the charge rate. So, if your charger is set to 1500mA, it will consider itself done when the current drops below 150mA. When it stops there will be a minor rebound effect when voltage is disconnected, which is why a full cell charged to 4.2v will often read like 4.15v or something after charging if you test it with a meter. Nominal charging current for a cell is given in its spec sheet, but 0.5C or 1.0C is common. A reduced charge current is gentler on a cell overall, but that expected 1/10 cut-off standard needs to be respected for safety also. This setting on the MC3000 will let you arbitrarily reduce the charge current while maintaining the termination threshold. Giving you an ideal setup.
@ultrapurple111
@ultrapurple111 Жыл бұрын
Along with Mr Baz, this is the best review I have seen on a battery charger. Great attention to detail and clear and coherent. I would not even consider buying this charger because of its terrible interface and dated screen at this price point but my viewpoint changed when I saw the Android app. This looks slick, modern and customizable. My main focus will be on AA and AAA batteries so this charger may be too much for these. It's A choice between this the Powerex mh-c9000 Pro and the XTAR VC4+.
@cheule
@cheule Жыл бұрын
For AA and AAA mainly, this charger is overkill. But when you start doing Li-Ion, LiPo, LiFePO, etc… this charger is the only one that gives me the control I’m looking for. The interface might look dated, but honestly the “dot matrix lines of text” is what you want for a charger this advanced.
@michaelballance1893
@michaelballance1893 10 ай бұрын
Great video. It's the right amount of detail for a quick start guide.
@cheule
@cheule 10 ай бұрын
Glad it was helpful!
@epadafunk
@epadafunk 2 жыл бұрын
Regarding the charge termination setting. Isn't a voltage dip only seen with NiMH batteries? In the Li-Ion menu, I think what you're seeing is the CC/CV termination. The charger charges at a constant current, and voltage increases until 4.2 or whatever is set, then current is decreased to maintain that voltage until the set current , in the example 0.15Amps. Once the charger hits that current during the CV phase of charging, it terminates the charge cycle.
@cheule
@cheule 2 жыл бұрын
You are of course correct. I had a brain fart and reverted to describing NiMH battery charging, just as you suspected. Good catch.
@Milenko1041THEEDGE
@Milenko1041THEEDGE 2 жыл бұрын
@@cheule So if I got this right, essentially setting the termination to 0.10A, this means that the charger would not go below 0.10A while charging? It would cut off as soon as it noticed a CV less than that?
@bobcatt2294
@bobcatt2294 Жыл бұрын
@@Milenko1041THEEDGE I am also awaiting a response to your question.
@eltonus2
@eltonus2 Ай бұрын
2 Additional Things... The capacity setting ,while it suggest a charge current, IS a limit . It will terminate charging after the energy amount of this value went into the battery. DELTA V termination does NOT apply to LiIon cells... as in MOST chargers... It will hold the cell at 4.2 Volts (if 4.2 is set that is ) than reduce the chrage current as much as is required to not exeed 4,2 volts and it will terminate when it reaches the set termination current. so a higer value means it will terminate earlier but the cell idle voltge will fall back more after charging. a lower value means it will charge longer and the idle voltage will be closer to 4.2 volts...You should set this as a compromise between bettary life time, usage of capacity und chargetimes (if set to 50 mA for example it will take very long for the Programm to finish just to charge a couple of mAh extra)
@naota3k
@naota3k 2 жыл бұрын
I've never used a battery charger that you can just "toss" a 10400 in. They're always _just_ too thin to reach the little "nibs" on each terminal. PITA form factor, but such a useful battery.
@youtubeuser5424
@youtubeuser5424 Жыл бұрын
My Vapecell S4 plus I can just toss 10440s in to. This looks like a great charger as well, but my S4 works well enough for my needs.
@erikderuiter7475
@erikderuiter7475 2 жыл бұрын
for the people like me that has on 'older' hardware version MC3000 and have problems with flat top batteries not making contact on the positive terminal: just use a little magnet on top of the battery to get a good contact.
@cheule
@cheule 2 жыл бұрын
Good tip!
@Dezagon
@Dezagon 2 жыл бұрын
I've been looking for something better to replace my XTAR VC4S, this looks like a great option! I love the level of customization in the programs, that seems really nice. I always feel like my charger does strange things with eneloop pros and it sounds like this one will handle those better. Thanks for the detailed review
@Sui778
@Sui778 2 жыл бұрын
You'll like the MC3000 a lot better than that VC4 series. Basically will be like comparing a tool to a toy.
@bobcatt2294
@bobcatt2294 Жыл бұрын
Searching a review on Epoch X4 Touch vs Mc3000. Thumbs up.
@cheule
@cheule Жыл бұрын
Thanks for watching!
@bobcatt2294
@bobcatt2294 Жыл бұрын
@@cheule Is there a comparison review?
@cicco1838
@cicco1838 2 жыл бұрын
Best info thank you for video bro...
@rudib4353
@rudib4353 Жыл бұрын
I even charge 10180 with it with 0.05A. Needs an extension due to its small length, but it's the only charger that can charge from 50mA to 3000mA per slot.
@cheule
@cheule Жыл бұрын
There really is no better charger. I just wish SkyRC would rerelease a version 2 with 26800 length.
@SyntheticCompany
@SyntheticCompany Жыл бұрын
@@cheule Thanks for your reviews, nice work! I am using an Olight magnetic charger for my 26800, I just let it rip overnight and it's not too bad. Have you found a newer multi-bay charger yet that works with this fatties?
@lullylew9083
@lullylew9083 5 ай бұрын
Fantastic review and guide. Thank you.
@kylepaxton431
@kylepaxton431 2 жыл бұрын
So how do you charge your 26800 cells?
@miguelsbpgj
@miguelsbpgj 7 ай бұрын
Capacity parameter is in fact (also) a limit. Effectively the charger sugests some other parameter values based on capacity but, if for any reason, its value is exceeded charging will be terminated and charger will show "Capacity cut off" on the display.
@kleinbottled79
@kleinbottled79 Жыл бұрын
When you are charging a battery and it gets up to 4.2v it starts to ramp down the amperage. Down and down it ramps it until some set low amperage (set by us in this case), then it terminates. After it terminates the voltage dips because it is no longer under a charge load. That terminate amperage setting is letting you set how long of a tailing charge you want at the top. How long will it spend decreasing amps towards zero. I like to set final charge at 4.2 and terminate at some much higher Amps than stock, maybe .7A on a 2500mah. This means the charger doesn't spend a long time trying to trickle charge to the top of the battery and voltage ends (after the voltage dip) at like 4.10-4.12v which is a much better voltage for a battery to sit at than 4.2 anyways.
@cheule
@cheule Жыл бұрын
All depends on what you want to accomplish! If you want max lumens, you want to be as close to 4.2v as possible. But it’s also true that batteries will last many times longer if they are only ever used bentween 20 and 80% SOC.
@EdingardSIGMA
@EdingardSIGMA 7 ай бұрын
Can you provide a link to purchase those alligator clips to DC barrel connector?
@achigkou7634
@achigkou7634 Жыл бұрын
My previous experience with the xtar vc4sl was terrible , especially with tha aaa batteries ( when the voltage is low, the xtar recognizes the ni-mh batteries are lion. So, is is a good idea to buy the mc 3000?
@PaulCK
@PaulCK Жыл бұрын
Well done good review,this SkyRC MC3000 battery charger i would Never buy one,i just looking at the display and all the button's pressing give me a headache,all i want from a battery charger is to charge batteries i don't want to take an hour to set it up🙄,i do understand this charger has got lots of function's and lots of thought gone in to,it is a shame the design of this unit look cheap and unattractive that's my opinion, i hope i have help the manufacturer of the SkyRC MC3000.🤭
@adrsprints
@adrsprints 10 ай бұрын
Well, it's kinda the reviewers fault since this charger has an app to set things up.
@danielmcloughney7140
@danielmcloughney7140 Жыл бұрын
Where do you go to find the specifications to charge different batteries? I am looking for: Samsung 35 E 18650 35000mAh 8A Epoch 18350 1100 mAh 9A IMR Molicel 21700 P45B 4500 mAh 45A
@cheule
@cheule Жыл бұрын
Read up on batteryuniversity.com. Great website. Usually just follow 1C. So that means a 3000mAh battery can be charged at 3A. Or a 4500mAh at 4.5A.
@tomquirin4231
@tomquirin4231 9 ай бұрын
hey brotha , got any extra #21700 batts around ?, lookin for a trade/swap here possibly , i use in my klarus g15 tactical flashlight , thanks > tom !
@Milenko1041THEEDGE
@Milenko1041THEEDGE 2 жыл бұрын
I've got a question. I ordered this charger and would be using it for LG HG2 batteries. 3000mAh cells rated at 20A. What termination should be used? Can something go wrong if that's set too high with this charger? Thanks!
@cheule
@cheule 2 жыл бұрын
All Li-po 18650s should terminate at 4.2v. It’s safe to charge at up to 1C. 1C means match the capacity for amps. So a 3500mAh battery can be charged at 3.5A. Let me know if you need additional help.
@phantomphixer333
@phantomphixer333 9 ай бұрын
First, great review! I'm a new subscriber as I recently purchased the MC3000. In fact, it just arrived via Amazon today. I encountered an issue almost immediately. I have a number of Fenix Flashlights and some used different batteries. This product seemed like a good buy rather than buying new batteries continuously. My issue is, I inserted four batteries, all of the same brand and type. (Garberiel 3.7v, 18650 Rechargeable Battery). Unfortunately, the charger says I only have one battery installed, the other three say "No Battery"??? I watched one of your great video's, you stated that you only encountered this issue with one of your sampler batteries, and you also noted no other battery gave you this error. The batteries I have are all larger, than the one you referenced. But I still have the issue. One location seems to work and the others do not. I moved that batter to another location, and it works? What could be wrong? Any idea?
@cheule
@cheule 8 ай бұрын
It’s really hard to tell without pictures or video to watch. I’ve been using my two SkyRC mc3000s for over a year and they’re fantastic chargers.
@speedlever
@speedlever 2 жыл бұрын
Curious what other chargers you have to compare against this one?
@bobcatt2294
@bobcatt2294 Жыл бұрын
Good question - thumbs up.
@lektro808
@lektro808 2 жыл бұрын
Better than the ISDT N8? Need a quality charger primarily for AAA’s/lipos for hobby stuff. Seems MC3000’s may be overkill?
@cheule
@cheule 2 жыл бұрын
Overkill? Probably-but I like having the flexibility to do whatever I want. I often charge batteries to 3.9V and things like that.
@SuperBrainAK
@SuperBrainAK Ай бұрын
Hey man! Great review! I had made a video on this thing also. It's pretty awesome right! I linked your video from mine because it seems a great fit if people are looking at getting one.
@buzzkill1988
@buzzkill1988 2 жыл бұрын
Awesome thanks
@mattsmith6828
@mattsmith6828 7 ай бұрын
i think chargers like these and LiFePO4 batteries is the way lol
@cheule
@cheule 7 ай бұрын
liFePO4 are really good in certain applications! (Like power banks)
@Bigsmegma44
@Bigsmegma44 9 ай бұрын
Great video. I have one ordered. Can you charge 9v Lithium Ion batteries as well? Thank you
@kleinbottled79
@kleinbottled79 Жыл бұрын
XTAR SC1 is a 3A single bay charger that will charge a 26800. I'm seeing them on amazon for $13. Been searching for a more fully featured charger that fits the 26800 with no success. If anyone has a tip lemme know.
@cheule
@cheule Жыл бұрын
Yes, I still use my SC1 plus for 26800s. By the way, note the sc1 and sc1 plus are different.
@JATWICE
@JATWICE Жыл бұрын
is skyrc MC3000 resistance always high? because mine can be up to 1000 resistance (aa battery)
@cheule
@cheule Жыл бұрын
Gosh, I haven’t paid much attention. I’ll start looking.
@peskypeet
@peskypeet Жыл бұрын
​@@cheule Find anything out yet?
@bobcatt2294
@bobcatt2294 Жыл бұрын
@@peskypeet Also awaiting his response.
@bluesteelbass
@bluesteelbass Жыл бұрын
Clean your connections. Spin the battery in the terminal, scratching the metal for best readings. You could have a dud battery if reading too high a resistance.
@nacogburn
@nacogburn 2 жыл бұрын
..."let's say there's a power outage, people need flashlights- I didn't have my batteries charged..." Something tells me that's not terribly likely based on what I know about you from your KZbin content. :)
@MrGatlin98
@MrGatlin98 2 жыл бұрын
If this supported 26800 cells it would be perfect.
@Sunstepa
@Sunstepa Жыл бұрын
If this supported 46800 cells it would be unreal. 😆
@bluesteelbass
@bluesteelbass Жыл бұрын
@@Sunstepa Why not just make an adapter? I can think of several ways, one of which I have already implemented.
@Sunstepa
@Sunstepa Жыл бұрын
@@bluesteelbass it's easy. You need wires and magnets tos connect the charger and baterry. By the way my reply to that person was sarcastic. 😁
@nicholasscurti8001
@nicholasscurti8001 Жыл бұрын
Can it charge Olight batteries, or if not any ways to do so?
@cheule
@cheule Жыл бұрын
Depends on the battery. But most olight batteries can be charged in it. Sometimes with the addition of a little neodymium magnet on the positive end.
@nicholasscurti8001
@nicholasscurti8001 Жыл бұрын
I tried a small one, but it was still too large to work. Know where I can get one small enough?
@cihanbozkir
@cihanbozkir Жыл бұрын
It's sad that I missed it while being sold for 79 USD.
@cheule
@cheule Жыл бұрын
Even at $99 it’s worth picking up!
@cihanbozkir
@cihanbozkir Жыл бұрын
@@cheule I think so too but cheapest price I can have it shipped to Turkey is 140 USD now. So I'll wait for a while more for the price to drop and keep enjoying charging with rd6006p power supply manually. Checking the minus delta V manually while charging nimh is a joy. Charging li-ion is easy with any charger but nimh is tricky.
@JVBL1
@JVBL1 2 жыл бұрын
So where exactly can you get this for $79?
@cheule
@cheule 2 жыл бұрын
It was a Black Friday deal, but even at $100 it’s a deal. Amazing charger.
@JVBL1
@JVBL1 2 жыл бұрын
@@cheule it's $100 at amazon with $20 discount if I add a bank card to my account
@Slipps-t7
@Slipps-t7 2 жыл бұрын
Doesn't seem to charge lithium AA 1.5 volt contacted the company twice but no reply
@sethsalberg3678
@sethsalberg3678 2 жыл бұрын
Go to: www.candlepowerforums.com/threads/skyrc-%E2%80%94-ifa-2014-%E2%80%94-mc3000-charger-analyzer.389700/ Almost 300 pages of forum posts going back to 2014 when the charger came out. There have been a few hardware revisions and firmware is still being updated. Ask your question there.
@cheule
@cheule 2 жыл бұрын
First question, is “Lithium” 1.5v rechargable? I think of these when you say that: www.brandpreventiewinkel.nl/wp-content/uploads/2020/12/energizer-lithium-aa-rookmelder-4pack.jpg and those ARE MOST DEFINITELY NOT RECHARGEABLE. With that said, switch to expert mode and you can set up any charging program you like. Start with a Li-Ion charging program and change it to have a lower cut off. I’m not sure what the values are, but I’m sure you could find it with search.
@Slipps-t7
@Slipps-t7 2 жыл бұрын
@@cheule Kratak AA is what i'm using and the company have replied saying none of their chargers will charge these batteries
@harryhenderson7208
@harryhenderson7208 2 жыл бұрын
@@Slipps-t7 What charger do you take for the kratax aa? I have the same Problem. Thx
@Slipps-t7
@Slipps-t7 2 жыл бұрын
@@harryhenderson7208 I had to buy 4 more batteries with the supplied charger, the MC3000 will not charge them and the company is not interested
@CRONZ_2501
@CRONZ_2501 Жыл бұрын
SHUT UP AND TAKE MY MONEY!!!!!!
@cheule
@cheule Жыл бұрын
I love futurama so much.
@user-cx2bk6pm2f
@user-cx2bk6pm2f 2 жыл бұрын
I had one, they suck. The spring for the battery broke, not one but two out of four. The user interface is just obtuse, like stupid complicated and unintuitive. This is the dumbest thing I've seen in a while.
@cheule
@cheule 2 жыл бұрын
Haha!
@Boz1211111
@Boz1211111 Жыл бұрын
This is not just average charger if its too complicated you should buy opus or sth simple that can charge and discharge. Im here just sitting amazed with this because its fully configurable which my opus is not and i really need that (im into capacity testing a lot)
@user-cx2bk6pm2f
@user-cx2bk6pm2f Жыл бұрын
@@Boz1211111 I'm an elelctrical engineer, I deal with complicated for a living. You are right... it's good to have options and access to advanced features. The simple chargers where only one or two buttons are pressed... yes, easy but no advanced features. The mark of a GOOD charger, however, is access to advanced features in an INTUITIVE way... and springs that do not break.
@peskypeet
@peskypeet Жыл бұрын
​@@user-cx2bk6pm2f Your opinion is noted and seems wise. With that being said, what charger fits the parameters you listed? I need a charger for 14500, 18350, 18650, 21700, 26650. If I have to have two different chargers so be it.
@user-cx2bk6pm2f
@user-cx2bk6pm2f Жыл бұрын
@@peskypeet Hi Peet. I now have a charger callled Zanflare C4... I don't think it'll take 21700 though it will 26650. Is it good? I really don't know. Frankly the other charger gave me such a headache I just wanted something works without breaking, and so far it has. It's a Chinese brand, if that matters to you.
@6537537
@6537537 Жыл бұрын
Such an awful buttons and plastic for 120$? Seriously?
@FutureSystem738
@FutureSystem738 6 ай бұрын
If I wanted a dumb charger with great case and buttons I’d look elsewhere… plus anyway, it’s got a great phone App as well. (I don’t want a dumb charger, and could not care less about “awful buttons”. The buttons actually work very well.)
Xtar Dragon VP4L Plus Battery Charger
18:02
Julian Ilett
Рет қаралды 11 М.
SkyRC MC3000 PC Link Software: Quick Look
4:20
Mr Baz Reviews
Рет қаралды 10 М.
My Cheetos🍕PIZZA #cooking #shorts
00:43
BANKII
Рет қаралды 28 МЛН
Matching Picture Challenge with Alfredo Larin's family! 👍
00:37
BigSchool
Рет қаралды 46 МЛН
Or is Harriet Quinn good? #cosplay#joker #Harriet Quinn
00:20
佐助与鸣人
Рет қаралды 7 МЛН
Sky RC MC3000 Review and Teardown
25:14
SuperBrainAK
Рет қаралды 10 М.
Ordering your first D4V2 from Hank Wang at intl-outdoor.com
24:10
Cheule's Flashlight Reviews
Рет қаралды 23 М.
SkyRC MC3000 - Unboxing and early testing - 18650 charger and tester
10:09
The Battery Doctor
Рет қаралды 10 М.
Connect the Battery to the Key to be Surprised || Open all locks
12:08
Innovation Plus One
Рет қаралды 566
Anduril 2 flashlight UI Easy explanation and mode overview.
12:44
JadeGeminiM390
Рет қаралды 18 М.
The Best Batteries to Stock Up On
11:45
Lumencraft
Рет қаралды 46 М.
My Cheetos🍕PIZZA #cooking #shorts
00:43
BANKII
Рет қаралды 28 МЛН