CHEVY 1500 AUTO to MANUAL SWAP-EVERYTHING YOU NEED!!

Thanks for watching guys and gals!!!
Make sure you subscribe for more content!!!
So we’ve got just about everything to get this swap going!!!
I’ll do my best to list everything!!!
Much love!!!!!
Parts
----
Master Cylinder. Part # 3695-05359749
Slave Cylinder. Part # 13966010, LSC326
ARP Flywheel bolts. Part # 203-2802
ARP Pressure Plate Bolts. Part # 134-2201
Pedal Assembly. Part # GMCLP00005
Clutch kit. Part # DF842503
Flywheel. Part # 700092

[@derekhancock1097]

Man what are the odds ,I'm tryin to figure out how to do a swap and find a very informative local. I'm from Henderson. Good walk through. Thanks man 🤘

[@HayesThompson707]

Hi I’m 14 and soon getting a Chevy 1500 and wanting to do the same thing thanks super helpful

[@justinjolly8385]

I’m 16 just got same thing have u done it yet

[@eliwetch2944]

@@justinjolly8385I got my 93 Silverado when I was 13. It’s already got a five speed but the v6 is shot so I’m about to put a 5.3 in it. This video covers basically everything you guys need to know, the only thing he or I may have missed is that there’s two types of both the clutch release bearing and the pilot bearings. There’s an old and new style and they depend on the length of the input shaft of you transmission as there is an old and new nv3500.

[@gabem949]

Y’all are all some lucky fuckers, my first truck I got was a 95 ford f-250 pos and it didn’t run 75% of the time I had it lmao, plus I got it when I was 20

[@RoundedNutzGarage]

I bought a very good non rusted 86 2 tone red white suburban for $400, but engine was full of water to valve covers Edit age 18 with my dads help, still building engine but i owe him the $$$$

[@StashingClips]

Rumor has it yall still waiting for that truck 🤣 daddies monies lmao

[@wills.5762]

11:25 that's not a part number, that's the type of plastic. Pa66 is the plastic gf50 indicates it's reinforced with 50% glass fiber

[@SingleCabCrew]

That 500-600hp range is true, we usto run a LQ9 with a torquer V2 and a 200shot and it definitely held it’s own.. took down a bunch of cars including a hellcat and GTR

[@emorytucker5467]

What an absolute champ! This helps me out perfectly

[@TuhotArizona]

The 5.3L is estimated to be around 383 ft.-lbs. of torque with the NV3500 rated to handle up to 300ft.-lbs. of torque. That's why they weren't offered for engines bigger than 4.8L, estimated to be between 255 ft.-lbs.(Older) and 295 ft.-lbs.(Newer), {1999-2006 engines}.

[@nicholasburgett3840]

so i probably shouldnt put one in my 8.1 swap build lol

[@derucktorez2260]

@@nicholasburgett3840 send it but.

[@jaychristensen2179]

@@nicholasburgett3840would do a nv5600 for that tbh

[@SingleCabCrew]

Pffft my 4.8 228r cam 200shot didn’t kill that trans but it did take about 30+ pulls with the lq9 torquer v2 cam with a 200shot to kill the guts on that same trans

[@thestlguitarman7244]

I was wondering the same but they came in the older trucks (96-98) with the 5.7L rated at like 330ftlbs. Kinda weird

[@marcusbarrett9813]

Thank you man, working on my swap now and this is incredibly helpful, thank you!

[@davidl.hutchenssr.476]

I am trying to do a 400 turbo automatic to 5 speed manual in my 1988 cheyenne with a 4.3 V6. Thank you for all the great information!

[@marcuswoodxx]

Absolutely! I’ll have an update video in about a week or so. Thanks for watching!!

[@obbyjep7597]

Great info. Thanks man. I have a nv3500 behind a blueprint engines 400sbc around 500hp in my 1 ton 49 dodge. Had it that way for years now and no problem. I drive fairly gentle but still floor it sometimes just don't launch harder pop the clutch.

[@blakeslocum2732]

Currently halfway through the video. This is a God-send. I’m about the next year or so I want to manual-swap my truck (5.3 2001 sierra 1500 SLT) Like you said it’s of course an automatic but that’s literally the only thing I have wrong with this truck. I NEED my manual. Any help is appreciated always

[@blakeslocum2732]

When’s the next video?? Can’t wait!

[@marcuswoodxx]

I apologize for my lack of posting. Update video should be up within the week! Thanks for the support!

[@blakeslocum2732]

@@marcuswoodxx can’t wait for that to happen, sounds good!! No worries man, life gets busy, and we’re looking for high quality over quantity. Keep up the good work!

[@Hoosier81]

I’m right across the bridge in Jeffersonville, appreciate the upload. I got a 5.3 cateye and I need to drop this 4l60, so I can bang some gears. Followed

[@Joe-o4e1d]

Thanks for the heads up videos.. I have a 99 blue Chevy Silverado that comes with the 5 speed and I just had to replace the clutch and your video was very helpful.. Great job bro!

[@ajanafrancis3711]

I did this to my tow truck it was pretty easy to do once u understand how to do it

[@shawnwillett7746]

Hey man was there a spacer behind automatic flexplate between the crank an flexplate that has to cum out before clutch installs

[@wyattmiller5268]

Can we get an update on how the truck is doing? I’m about to do the same swap on a 2000 Chevy Silverado 1500 4x4 with the 5.3 and auto trans.

[@LeelandDomino]

Hey Marcus!! love your channel dude keep up with the awesome content. I'm seriously doing the exact same swap as you with a parts truck as well but both my trucks are an OBS 93 Chevy Silverado's but i was hoping you could help me with whats the best clutch kit to use? I'm running a 93' SCB 350 5.7L with the vortec top end...pushing 350 hp to the wheels and i tow lots and like to do burnouts so im having trouble picking out the best clutch for my 4x4 10 spline GM NV4500... what's your recommendations?

[@kevinmartin1679]

Late s10s have a further back shifter, haven't tried but it won't line up with stock hole

[@Reallythiscat]

I'm wondering for a Chevy suburban. What are the splines count? 29, 30, 32? So much information reading online

[@jake6574]

Hey Marcus, love the videos man. excited to see the outcome I’m almost done the same swap. What’s the song in the beginning?

[@Billyjack-Two-Crows]

As I'm sure the good old GM engine light will come on, understanding that if you even fart in the driver's seat the engine light comes on when it comes to the 07 through 13 GM half tons.

[@Truckguygrant8782]

I got nv 3500 for my 4 door 1500 2010 4.8 putting it in few weeks after I get my clutch kit all im waiting for

[@christopherdavid1474]

How did you work with the brain

[@miwimath8836]

Want to do the same how did it go what clutch and clutch system you got? Transmission mount? Flywheel? And also ecu Did it work like in the video im not sure since its a 2010 Ty if you replie would be appreciated

[@Truckguygrant8782]

@@miwimath8836 had to get it tuned and 99-06 clutch system with a cross member from a 99-06 that had a 5 speed and it should all match

[@Truckguygrant8782]

@@christopherdavid1474 had to get it tuned or u gotta keep clearing codes

[@nathanboothe6951]

So I have a 2006 Silverado with a 4.8 and I found a whole parts truck S-10 with a NV3500 and all would have to worry about is drive line and clutch kit after getting the master and slave cylinder?

[@Alex-vz2jz]

Awesome video, well explained very simple to understand👍 I need a truck first but when I get one I'll be using this video and the future swapping videos as reference.

[@raulmartinez7307]

Good morning boss curious to know how you bypassed the reverse neutral safety switch or what harness you used ?

[@MatthewMills-z1d]

I'm working on a 89 Chevy c1500 for my dad. It had a 5.0 in the truck with an automatic transmission. I just put a 350 crate with it all hooked up and I put Saginaw 3 speed behind the motor. I'm having an issue with the fuel pump not working now. I'm thinking it's because the old transmission wires are a post to be in the sensors. I was wondering if I could hook up the old sensors and put the the switch in neutral position. Would this work for the fuel issue or does the connections with the transmission's sensors have nothing to do with the fuel issue.

[@pierogillio]

Hy buddy, what you think about a V8 5.3 into a work truck with oem manual transmission and v6 engine?

[@CarOpieMods]

My mom 97 gmc sierras 4l60 just blew up and she gave the truck to me so im gonna swap it out to a 5 speed

[@thestlguitarman7244]

Anything that you know of that would be a different process for a 98 k1500 5.7l?

[@guyturgeon7692]

you will need to tune your computer because throttle wont response right because transission is programed in computer , buddy of mine had a ls manual swap truck before the tune it was slow to pass cars on hyway and after it was like if it was from factory

[@sesskoga01]

First 30 sec of vid! Yooo subbed to a local dude! Obo!

[@subtle.studios]

Not sure if I missed something? What did you do with the tcm? I’m swapping an nv4500 into a 2004 Silverado

[@SquareBodyK5]

How is the swapping going? I'm swapping my 2003 Chevrolet silverado 1500 extended cab to a nv4500 I'm sicken tired of this 4l60e! 😡

[@shawnsibley]

I’ve been watching all your videos on this swap and I’m curious about the trans wiring. Did you use the stock stuff from the auto truck or pull the manual wiring out of your parts truck. Awesome work!

[@ThatLSTahoe]

i front this where is the reply at lol

[@chefman45887]

I have a 88 Chevy Cheyenne C3500 2wd 5.7 350CI it has a manual, and want to swap to a automatic. Best trans for the swap and any info to help me out would be greatly appreciated.

[@charlesjones1664]

I have the same truck but wanna switch from the 4l60e to a manual lol

[@jdmayberry242]

I’m from Livermore and have a 90 K5 Blazer and would like to have a LS and a 5 speed swapped into it one of these days! Also have 2005 Dodge Dually 4x4 Cummins and hate the automatic in it would love to have a 6 speed manual in it!!

[@bamadave1983]

The light duty nv3500 has a close gear ratio and the full size is a wide ratio the wide ratio is 4.02 1st and the close is 3.49 1st

[@michaeldouna6521]

What did you to to overcome the crank length difference? Dished flywheel?

[@Fermin817]

What about the transmission crossmember ?

[@samuelarney9224]

I want to do this to my 2007 chevy silverado classic crew cab. The t56 would pair well with the 6.0l L76 I'm going to drop in it.

[@gmoguerrero8734]

What would be needed to complete the swap on a crew cab??

[@hillcharlie2761]

I seen this was 2 years ago but I got a 5lm60 in my 89 k2500 can I slap it in a 00 Silverado I'm aware I'll have to do some fabing

[@Shitnme1]

I'm going to be doing the 5 speed swap on my 08 Silverado in the next week and does all the parts you used work on mine? I got an 05 parts truck with everything to do the swap.

[@christopherdavid1474]

I'm looking into swapping my 09 Silverado 4.8 wondering how did it go and how did you work with computer my name is Chris thanks for any info you can give me

[@hypershadic9556]

Hey could you do this on a 93 Chevy 1500 extended cab I’m thinking of buying one because it’s hard to find now a days that came from the factory like that and I’ve seen many people do these swaps but they start up with no clutch and I want it to start with clutch it would help me a lot

[@victor.hugo.differentialz]

How's it holding up seeing this is 2years old

[@paulrichmond8392]

im converting my 98 silverado to manual(muncie 4 speed) from what ive been told the tranny has a stand alone computer so im going to try it withouf any computer programming.

[@tommy2664]

I want to do this job for my Silverado 5.3 99 the best transmission to tho this job is nv3500? Hi from 🇵🇷🇵🇷

[@jvinsnes]

Would you know if this trans fit the 96’ s10 blazer? I’ve got the 4.3 and 4-speed auto

[@larryoliver9368]

V8 swap on a 99 chevy s10 4 cly 5 speed truck right now, I want to keep it a manual transmission, will my nv1500 transmission work on a 99 5,7 engine. Any help will be much appreciated

[@JohnnyRebKy]

What you think it cost to have a trans shop do the swap?

[@trainermerrell724]

Can you do this to a 4x4 07-13 Silverado because I love the truck but hate a auto transmission?

[@acunchevy54]

I am wanting to do mine too. Mine is 03 silverado, 4wd, auto, 4.3, I want to go manual.

[@miwimath8836]

Did you had any respond. Did you do it. I have a 2010 and wanting do do mone juste wondering how would it go

[@miguelpalacios5993]

So you dont have to mess with the electrical on the harness ?

[@Thefamof4]

How much does the entire swap cost. I’m looking to buy a 1500 and was wondering how much that would be before I buy the truck.

[@brodykoopman]

Hey Marcus. Would a nv3500 from a 1991 k1500 work in a 2003 silverado? Also would It work for a 4x4 extended cab?

[@jakeclemons650]

i also have a 5.3 4x4 ext cab and want to keep my 4 wheel drive. if you find more info on weather it will work with 4x4 lmk please.

[@tre9563]

I'm pretty sure I have the same in my 93

[@GOATYTINGZ]

Would this work on a 2007 Chevy Tahoe with all needed clearances made and cutting shifter hole & clutch pedal hole 🤔🤔

[@crestflock]

How can you replace the tail shaft seal of the Chevy 94 manual transmission?😊

[@brianflowers7387]

You think it would be possible to put a nv4500 4x4 in a 2001 z71

[@Joe-o4e1d]

If you get to this question I need to know what size I need to lose my drain plug on my 5 speed..

[@schmidtw900]

Bought a 1997 Chevy K1500 with a manual swap in it and am having issues with reverse lights not working and headlights only working in daytime runnning mode when ebrake is released but headlights turn off when light switch is turned to on position. So no brights ! Old owner added an LED bar to the brush guard to rectify this problem! Any ideas how tp fix this !!

[@abelgonzalez5937]

What’s up man dig the videos I just got a tkx transmisión and am looking to swap out the auto is this the same process and part for the swap I want to do ?

[@noahbrady2782]

Need a hand bought a 1996 Chevy 1500 it was swapped to a manual it drove when I got it replaced the engine 350 same that was in it it came out of a 1996 Chevy suburban but now I'm not getting spark went through fuses but not getting enough power to the sensors or ignition coil kinda stumped the wiring from the auto is still there just hung up outta the way

[@jankycustoms6089]

hey i did the swap with the same parts and can't put the truck into gear the trans came out of a truck with early a long crank 4.8 not sure if that has anything to do with it

[@fred1706]

What manual transmission and differential oil does it have? I have a 1995 Chevrolet Cheyenne pickup, a 305 tbi 5.0-liter 8-cylinder engine, 238 thousand kilometers and I don't have the vehicle manual. They are the same models from 1988 to 1995.

[@marcuswoodxx]

I apologize for the late response! I run pennzoil manual synchromesh in the tranny. As for diff I run valvoline 75w-90 synthetic! Thanks for watching!!

[@josephheffernan3054]

What did you do for cross member

[@russellmccarthy3620]

I have a 2000 Silverado that came stock with a 4.3 and nv3500. My donor truck is an 01 Silverado 5.3 with 4L60-E 4x4. I'm using the motor harness from the donor truck. Did you run into any wiring issues? I haven't had the time to compare the harness to the nv3500 to ensure it will fit.

[@guitarguy3221]

I had to cut one sensor off the manual trans harness and splice it into the swap auto harness. Pretty sure it was the reverse light switch. Plugs into nv3500

[@michaelscott8129]

I really need your advice about something on a swap like this I have a 1965 chevy custom with a manual 4 speed it was bolted up to a 305 small block I want to take that transmission out and put it in my 2003 chevy silverado 2WD club cab it has a 4.8 vortec V8 and I would like to know if that transmission will work in the 2003 chevy and possibly keep the manual clutch setup with the linkage system setup but i have no idea if the newer engines like the 4.8 vortec has a threaded hole in the block to thread in the clutch linkage pivotal bolt because I really don't like hydraulic clutch systems not only that what would I also need to do in order to install the clutch pedal when it comes to a manual clutch setup because it would also save a lot of time and hassle of changing the mastercylinder and who knows what all else if I can stay with the manual clutch setup but I would really like to hear your opinion and thoughts on the matter

[@firefox5529]

Is this the same process on a 2000 Chevy s10 w/ the 4.3l and 4x4

[@franciscosantiago5036]

New to the game here. Do you have to do anything different if your truck is a 4wd? Just get nv3500 with transfer case or what? Cool vid though!!!

[@marcuswoodxx]

I apologize for the late response! But yes just add the TC to the process and send it. I appreciate the support!!

[@Blackout75]

This is awesome! i got a 2500HD silverado with the 6.0, And the guy before me ran the tranny without fluid...Burnt the transmission up, wanted to do a Manual swap! I was curios, Do they have any Manuals with a 6 speed?

[@ARDIECARPENTER]

Look at a t56 or tr6060 nit sure on if the shifter will line up but they will bolt to the 6.0

[@bruhmode283]

Is it possible to make a 2020 Silverado 2500 manual swapped? I know it’s crazy 😂

[@richardcramer5988]

Looking in the same

[@GeorgeStarliper]

i have a 2015 silverado 1500 v6 has a automatic n want to convert to manual 5 speed can it be done from whatni understand 2014-2018 the same

[@miguelvalle7787]

Is this not considered a Hm290 transmission not a nv3500?

[@selfdaringmike4169]

Can you manuel swap a 2007 chevy 1500 4.3 I know alot.of people don't want the 4.3 but I got it as a good deal

[@theangrywelder]

I got a 94 k1500 and I'm swapping to a nv3500. Would you suggest swapping the ecm as well? Not sure if the motor will run right using the stock ecm meant for an automatic trans.

[@DanielaCea-o5k]

Hi could you tell me what i need i want to make my 88 5 speed i currently have the Muncie 465 but the shifter has gone sloppy and its hard finding a replacement

[@MandeepSingh-rg1xp]

Hi What kind of manual transmission I can get for my 2017 GMC Savana? Thanks

[@BuiltDifferent13]

I'm looking for a 2016 manual Silverado. Maybe a t56

[@AlexanderMoline]

My 4.8 factory 5spd drift truck was stolen last year and about to build another. Has anyone ran a 5sp with a awd setup? I've seen c notched 4wds but I'm wanting true awd. I guess the real question is, can the awd system out of an astro van be mated to the 5spd.

[@bendefour2067]

I'm doing this to my 2500 and I just got my nv4500 bolted to my 6.0l LS and took the manual computer and put it on but it won't start so do I need to cut the auto trans plugs to rewire the neutral safety switch and get this thing goin

[@al-mz1wy]

Are you sure about the flywheel bolt number? That is for a Toyota, not for la small block. Chevy bolts are 303-2802 not 203-2802

[@marcuswoodxx]

I apologize for the late response! Your correct I messed up typing in the part number! Appreciate the comment. Thanks for watching!!

[@saulcalvillo6923]

Hey by any change you know the part number for the flywheel bolt ? I’m putting a 04 5.3 in the 5 speed

[@saulcalvillo6923]

@al5678

[@acunchevy54]

Mine is 4wd auto but I want to go manual. Is it still the same?

[@king5sevn937]

My 2000 chevy silverado 1500 short bed has the automatic transmission crossmember will the nv3500 fit ?or I need another crossmember?

[@jalizkojalicienze1279]

I have a 95 silverado short bed 5.0 previous owner swap in a manual transmission with low and od which makes noises going on 1rst and pops 4th od.original i belive it was a hm290.is there a better trans than the hm290 to fit .or should i go auto swap of so whats the better option?

[@isaiahwinslow5140]

What do u do about the netrual safety switch

[@marcuswoodxx]

I apologize for the late response! I bypassed the neutral safety switch for my application. I don’t recommend it but it works for me! Thanks for watching!!

[@travisfrank5377]

How did you bypass it I can’t find anything online for it

[@JustinPVlogs]

Hi, how similar would this process be for installing on an 05 Tahoe?

[@king5sevn937]

What about the crossmember?

[@nielsenl4171]

What year is your truck I'm trying to find out how program my computer 2007 gmc yukonxl

[@pedrogarcia7230]

What about harness can you get away with a factory one?

[@marcuswoodxx]

I apologize for the late response. Yes I utilized the factory harness!! Thanks for watching!

[@metraxstar1451]

Hey I got a 95 with a manual transmission 4x4 and it needs a new transmission but I can’t find the transmission it has do you know if of another transmission that will work without much modification

[@jamarrismith7995]

Would it be the same process if I did it to my Tahoe ?

[@its_brian2419]

I have a 04 Tahoe and I’m thinking of doing this for the experience, will it be the same parts and some what the same way to bolt it up ?

[@marcuswoodxx]

I apologize for the late response. Everything should theoretically be the same! Thanks for watching!!

[@edgarsoto8860]

So would you replace the factory 4l60e speed sensor connector and tap in a connector from a manual speed sensor or are they the same ?

[@marcuswoodxx]

Speed sensor was the same on my application!!

[@jonlobello7151]

Hey, did you drive up to Akron (Talmadge) and buy your Summit parts from the store?

[@marcuswoodxx]

I apologize for the late response. I had all my parts shipped to me! Thanks for watching!

[@jonlobello7151]

@@marcuswoodxx I suppose most people do. I grew up in Akron, but haven't lived there for fifty years.

[@misaelmorales6522]

Can you do this swap on a 6.0???

[@mustangsally3878]

He said somewhere in the video it’s compatible with the 6.0 I have a 6.0 swapped silverado myself gonna be doing this swap cuzz I’m broke, otherwise I’d be doing t56 or tr6060

[@joelramos73]

Good video. I have a 2000 Silverado 4.8 in manual and I’m trying to put in a 4.8 automatic motor. Will it drop in? Or which parts do I need to change on the motor to get it to fit?

[@krosskid7657]

I swap you trans haha I got a 4l60 with a corvette servo

[@ThDESTROYER-xd5jv]

is it the same with nv4500?

[@barbaraperry3864]

Do I have to flash computer on 98 Sierra from 4l80e to Manual, it starts but wont run

[@subarutime5089]

I wanta get a steel pedal.

[@josuemoreno7914]

Will this be similar to 04 1500 floorboard 4x4

[@edgarorozco3805]

What would i need a for automatic 305 turned into a manual?

[@adameldridge4945]

I know this video is about a year old but I'm doing this swap with a 4x4....it's all installed and the truck is finished, but it will not start now, at first it was just not cranking, found the neutral safety switch wires underneath and jumped them together, it now cranks, will fire up for a second then die and not start back at all for a few minutes, but will do the same thing....am I missing something?

[@jakeclemons650]

sorry i dont have an answer for ya but im hoping to swap my 5.3 4x4 ext cab. what transmission did you swap in and were there any fitment issues caused by the 4x4. also curious about your particular issue so if you find a solution id like to know.

[@chefntoast]

What's a ballpark price range for total parts cost