Chevy Aveo Dash, Side Marker and Tail Lights Not Working Splicer Pack S101 Complete Repair

[@srips-]

I had the same problem, but was hesitant to cut wires. Before I take it to a mechanic and pay over $100/hr for who knows how many hours for them to figure it out -I decided to try it. Sure enough it actually worked! Thank you for giving us this video!

[@erickfunk2557]

Your welcome. Thanks for watching.

[@samuelm1176]

this car had plenty of problems, I had this problem too. still driving this car, for now. spliced it all back together.

[@NobleONE17]

Hate this car so much, rear brake drums/wheel bearings are 1 piece brake cylinder always leaking and so many electrical issues...this helped a lot thanks man I appreciate you for making this in depth best vid about the s101 pack

[@erickfunk2557]

Thanks for watching. This car is known for having lots of other issue. Sounds like your chipping away at them.

[@littlekitty4562]

The wonders of having a chevy aveo 🙃

[@erickfunk2557]

Lol, thanks for watching.

[@thecountdown4402]

you just saved me a lot of time and frustration 😆 my nephew has exact Same car and Same problem, I soldered all the wires according to your color code and it works!!! I didn't just do the 4 brown ones, I did all and got rid of the burnt connector thank you 🙏🙏🙏

[@erickfunk2557]

Thanks for watching. Glad it worked for you!

[@RandallAraujo-f5f]

Hi

[@RandallAraujo-f5f]

How did you join them, mine is still burned, seven cables

[@thecountdown4402]

@@RandallAraujo-f5f you can use wire connectors, I used a soldering tool

[@cosi8935]

did you have trouble getting the white connector bit on the left out

[@jimdonnelly2780]

Great video!! I have the same issue and after watching your video I inspected mine and it’s burnt in the same spot. Gonna tackle it today.

[@erickfunk2557]

Good Luck! Thanks for watching.

[@jimdonnelly2780]

@@erickfunk2557 worked perfectly. Thanks again.

[@MasiMaki]

I can not just keep of this video that helped me without spending a penny. My care model is exactly as this care Chev aveo T200 2008 model, i confirm that i just fixed mine today following these steps. Thanks alot for the video👍👍👊

[@erickfunk2557]

Your welcome! Thanks for watching!

[@dancindan2807]

Thank you so much for this video. I was able to fix my light's in about an hours time. 🙃

[@erickfunk2557]

You’re welcome. Thanks for watching.

[@ajax7769]

Thank you so much man I fixed my sisters car bc of this🙏🏽

[@erickfunk2557]

Cool thanks for watching. Glad it helped.

[@mateuszt4460]

Very good solution, everything work like a charm, thank you

[@erickfunk2557]

Glad it worked for you. Thanks for watching.

[@javiermendoza2882]

Thank you so much for the info, I appreciate your video and it help me fix my ants Aveo 🎊 🎉

[@erickfunk2557]

Glad it worked for you. Thanks for watching!

[@fredht0967]

Thank you good job

[@EdwinGarcia-bx3ip]

Thaks for the info you Been a big help

[@erickfunk2557]

You’re welcome! Thanks for watching!

[@therubypearlglampertruecri3026]

So the wires that you sodered back together don't stick back down in the splicer? I have this problem. My dash lights and dinger don't work. Would like to do this myself without taking to the shop. I'm a girl but I do have some mechanical skills I learned from my ex husband.

[@hector2024hh]

Same side that URS were burnt but on mines is towards the front of the slicer

[@kevinadonay]

Thanks friend. Consult, what cables, would you have to splice to solve the problem of the dashboard lights. Surely my problem comes from this splice package, since the fuses are in good condition

[@erickfunk2557]

Hi Kevin, I no longer have the car. Please check out the Aveo forums below. Someone should be able to answer your questions. www.aveoforum.com/

[@kevinadonay]

@@erickfunk2557 Thanks friend, with the instructions of that forum, I managed to solve. In my case, I only eliminated the group of wires that are carbonized in the splice package and used Wago terminals for the splice (they are very practical, since they make the contact internally. Thank you very much.

[@gladstonelewies1668]

Where do you go if the white wires in the box are not burnt but your dash and tail lights are not working?

[@erickfunk2557]

Hello, I no longer have this car. Try asking your question on the Aveo forums. Someone should be able to help you. www.aveoforum.com/

[@gradyd8235]

Have link to the sp101 diagram you showed part of?

[@gummybear9564x]

Hi I have 2007 chevy aveo but license plates I replace bulb but still won't light up, can't seen to find the fuse for that license plate maybe you can tell me thank you

[@mosheramahlo8699]

Hey man thanks for the video, i got hesitant to comment and tell you that my 2005 Chev Avelo LS hatchback had six brown wires with a white stripe on them, then after cutting the all the six and joining them together, when i turn on the car, the dash and the RH tail light immediately lights up without me turning on the lights, and when i turn on the lights, nothing happened. I think i should have consulted you before. Please guide me through getting it to work. Thanking you in advance

[@erickfunk2557]

Hello, thanks for watching. I no longer have the car. Your best bet is to ask your question on the Aveo forum listed below. Let them know your original issue and someone should be able to help you. www.aveoforum.com/

[@Rize_Inn]

What about 2009? My fuse box is different, but I'm having a similar problem. My passenger side tail light is out, but the light works when the brake pedal is pressed. I've changed the bulb a couple of times. I made sure it's the correct bulb and replaced all the fuses.

[@erickfunk2557]

Hi Bud, I’m not sure about that year. Check out this website and be sure to ask your questions there as they have many talented folks who can answer your question. www.aveoforum.com/

[@Rize_Inn]

@@erickfunk2557 Thanks

[@CStrbel]

@Erick Funk in a sea of diy videos amounting to crap yours is an absolute gem. I can't praise this video enough. Phenomenal. I might be freezing my butt off outside at 3 in the morning so that this car is functional for work in a couple of hours but I'm not alone. I have a competent guide who can articulate exactly what the problem is, how to solve it and is slow and methodical in the procedure as to not miss any crucial details. Please drop me a line, I'd love to buy you a coffee as thanks, or a beer if that's more your speed. Thanks for taking the time to make this. What a legend.

[@erickfunk2557]

Thanks for the kinds words, really appreciate it. Hope you were able to get your car up and going.

[@CStrbel]

@@erickfunk2557 yes sir! You saved the day.

[@bobmahalim]

Thanks

[@JonathanPhillips-xg7mj]

Are those fuse suppose to be missing? And the 2 relays

[@erickfunk2557]

Hello, I know longer have the car but I do believe they are supposed to be missing. Check out the Aveo forums below. They may be able to ask your question. www.aveoforum.com/

[@hector2024hh]

I turn my car on put running lights and my passenger side lights corner lights and back only on passenger side go off but when I look at splitter wires on the same section on URS but towards the front part are burnt do I have to cut 4 wires toward the front on mines

[@cosi8935]

is anyone else having trouble removing the white connector bit on the left i hate dealing with plastic i think the rhing is stuck

[@erickfunk2557]

Hello, thanks for watching! Please check out the Chevy Aveo forum. They know a lot about these cars and may be able to answer your question. www.aveoforum.com/

[@RandallAraujo-f5f]

Who helps me splice them, the seven cables on one side burned, how do I splice them, make sure they are the same color

[@antoniomora4756]

Hello friend, could you help me? It's a small box from my Aveo. My Aveo burned. You won't be able to make a complete video of splicing the cables like this.

[@erickfunk2557]

Hello Mora, I no longer have this car. Ask your question on the below Aveo forum. They’re pretty good about helping people with their issues.

[@hector2024hh]

I have the same problem but wires are burnt towards the front of the splicer do I do the same thing u did cut 4 wires in front

[@erickfunk2557]

Hi Hector, I no longer have the car. If you go onto the below Chevy Aveo forum, they should be able to assist you. They are very knowledgeable. www.aveoforum.com/

[@edgarfernandez1861]

Hey do you think this can be the cause of my 30 amp fuse for my blower motor to be blowing ?

[@erickfunk2557]

Hello, I’m not certain but ask your question on the Chevy Aveo forum. Someone should be able to help you. www.aveoforum.com/

[@ГалинаБобкова-ы5б]

По английски, но проблема понятна. Теперь я знаю где находится Splicer Pack S101. Такая же проблема. Спасибо за видео.

[@erickfunk2557]

Your welcome. Thanks for watching.

[@bromate1]

I have a 2007 Chevy Aveo doesn't have a fuse box like that

[@erickfunk2557]

Hello and thanks for watching. Please check out the Chevy Aveo forum below. They should be able to answer your questions. www.aveoforum.com/

[@aldorabih9351]

Where can we bring the car to do just that. I am in Brooklyn NY

[@erickfunk2557]

You can check with your mechanic to see if they will perform this work around. They will probably provide another solution.

[@rebeccalathrop7802]

What is name of this part and who carries it

[@erickfunk2557]

Hi Rebecca, I’m not sure as I no longer have the car. Check out the Aveo forums below. They should be able to answer your questions. www.aveoforum.com/

[@jakemiller7842]

i did this but it did not work i proceeded to delete the whole splicer pack. still no luck what else could it be?

[@erickfunk2557]

Hi Jake, I no longer have this car. Please ask your question on the Aveo forum below. www.aveoforum.com/

[@dancindan2807]

Maybe the headlight switch?

[@GXR1LLA56]

I got my dash and my radio lights not coming on I'm try this on my 2008 it's annoying

[@erickfunk2557]

I’m not sure about the 2008, but ask your question on the below forum. www.aveoforum.com/

[@hugogonzalezflores5863]

No carga la bateria

[@RandallAraujo-f5f]

Who helps me splice them, the seven cables on one side burned, how do I splice them, make sure they are the same color

[@RandallAraujo-f5f]

Who helps me splice them, the seven cables on one side burned, how do I splice them, make sure they are the same color

[@erickfunk2557]

Hi Randall, I no longer have the car but ask your question on the Aveo Forum, and someone should be able to answer your questions. www.aveoforum.com/