Chevy S10/LS6 Swap/Complete!

[@truss6282]

Very nice!! Clean and tasteful. I'm about to start a 1984 project, just looking around. This is definitely one of my very favorite builds.

[@Blitzkreger00]

Thank you for that nice compliment! Man, it's nice to know that so many people like yourself appreciate my hard work. Check out my other videos if you like. A lot has changed since this particular video. Thanks Again!

[@ChristianYe-j4l]

Rear end and gear

[@ChristianYe-j4l]

Building a VT 4.3 soon

[@flowroll777]

I need a little manual transmission truck like this in my life, good on ya for building your dream ride

[@Blitzkreger00]

When I changed the transmission in it I was trying to do a T56 swap in it. I would have loved to make this truck a manual. Thanks for watching!

[@JohnAdams-nb2ox]

That is a nice set up. You learn to appreciate it alot more when you build it yourself. I like it. Very much so. Good job.

[@Blitzkreger00]

I appreciate that my friend. Worked hard on it and its slowly getting where I want it. Soon as I find a beater to drive to work I'm going to redo the paint on it.

[@jackperry9369]

Very nice job thanks for sharing

[@The89delta]

That accent is one of kind. Nice to hear it again. Been a long time.

[@Blitzkreger00]

Thanks my friend. Hope all is well. And thanks for watching!

[@dtperformance256]

I have watched this video multiple times. Nice truck!!!

[@Blitzkreger00]

I really appreciate it my friend! And thank you for all of you're views and watching!

[@dtperformance256]

@Blitzkreger00 absolutely. I am swaping mine now on my channel and I am always looking for ideas and your truck is an inspiration. Love it.

[@Blitzkreger00]

@@dtperformance256 hell yeah! Man that really means a lot to me knowing that I'm able to give you that inspiration. Have you checked out my older videos when I was putting it all in?

[@dtperformance256]

@@Blitzkreger00 yes. Been watching them tonight. I am at the install part of my build. I watched your videos when I first started and now going back catching on on the others.

[@waynewells915]

Congrats on the build! One of the cleanest best looking s10’s I’ve ever seen. Should be well into the 11’s in the 1/4 mile for sure!

[@Blitzkreger00]

I appreciate it! Well a lot has changed since this video LoL. Check out my latest video and that should fill you in. But, I will be making another video soon as I get some engine stuff lined up. Thanks for watching!

[@SWFabrication.]

"Was it worth it" Hell yeah, that looks incredible and must be a friggen blast to drive. It sounds insane to. I'd be smiling from ear to ear driving that bad boy.

[@Blitzkreger00]

It's a lot of fun for sure, lol. Gonna be posting a new video real soon so be sure to check it out. Thanks for watching!

[@SWFabrication.]

@@Blitzkreger00 I bet, looking forward to it

[@Blitzkreger00]

@@SWFabrication. Awesome! Thanks Again!

[@mikeh.753]

That is one nice looking 1st Gen S10. I'm really heal. Not over done and very tasteful build. I really like the way you have left it 99% stock appearing. I would imagine it scoots down the road pretty damn hard. That p/u is a real thing of beauty you did a damn good job and it shows that you took your time and did EVERYTHING right the first time around. It sounds BADASS 😎. Hell yeah brother I don't even know you but I can tell you are a damn fine mechanic/fabricator. I absolutely love the fact that you left the factory A/C and heater, that makes it a rear street truck. I built a 327 2 speed power glide Chevy Luv and it took me almost 2 years to finish it and do it right the first time around. It ran low 11's on street tires and 91 octane pump gas. But it wasn't as nice as your first gen S10 in this video. Anyway great job brother and keep up the good hard work and drive her like you built her to be drive. Happy motoring. If you decide to sell her please post her here on KZbin cause I would jump at the chance to own such a well built little p/u truck.

[@Blitzkreger00]

Man... I really appreciate this awesome comment and compliment on my truck! Your truck sounds like a real runner as well. I really wanted to keep the street machine concept for this build. And i do enjoy turning my own wrenches as well. nice people like you are one of the reasons i enjoy doing it and posting it for everyone to see. I've done some new things to it since this video. If you get bored have a look at my more recent content. A lot has changed since this video. And I thank you for watching!

[@kezneki]

Thinking about buying my cousins 91 S10 and potentially tackling a swap. So watching these videos on what other people be doing gives a good direction!

[@Blitzkreger00]

Get it done my friend! It's a lot of work and weeding out issues. Mine is finally getting pretty close to being done. Check out my other videos.if you like. I have a little series of me tackling my swap as well LoL. I really do appreciate you watching.

[@trustaskinnycook610]

Nice ride Jeffery! I’ll give you call when I start to build one. I use to have a 350 in a S-10 blazer.

[@Blitzkreger00]

LoL sweet! My first V8 S-10 was a bad ass 350. Can't go wrong with those. Thanks guys watching!

[@lanejohnson7656]

Sweet lil truck, looks good. In the middle of my project,. I prefer the older square bodies but already had my 2000 sonoma.

[@Blitzkreger00]

I really appreciate it! That's cool that you have around body I wouldn't mind having one myself. Bought a 2001 brand new back in the day and I loved it

[@jackfote1044]

Real happy to see this truck done. Congrats brother, hope you enjoy it

[@Blitzkreger00]

That's super nice of you! I've been driving and enjoying it. I was telling my girlfriend that I feel like one of those mid life crisis guys that buy a Vette and drive it like 40mph lol. I just enjoy it and the sound of it.

[@mcstench8913]

man what a nice setup, i really hope my 2001 blazer xtreme ends up this nice when im done with her

[@Blitzkreger00]

Thanks my friend! I love the Xtreme's. Such a sweet looking truck. The blazers as well. Good luck with it. And thanks for watching!

[@stereotypicalwhitemale848]

You said 12 miles to the gallon at 3.30 per gallon, aged well 🤣 love the truck!

[@Blitzkreger00]

🤣🤣 It's more like 4.70 a gallon now

[@JustAGuy781]

With an LS swap and without doing a lot of performance mods you DO NOT have to run 93 octane. A simple 5.3L/4L60E with a slightly mild cam and tuned property you can run whichever fuel you want, from 87-93. Beautiful truck and nice job. I am about to do one for my son with ac/heat.

[@Blitzkreger00]

Awesome info and I bet your sun is looking forward to having something bad ass! And thanks for the compliment on the truck. Check out my other content to see more recent engine and trans stuff. Thanks for watching!

[@JustAGuy781]

@@Blitzkreger00 will do brother. Last S-10 I has was an '88 with a full cage, 9" w/4.56, ladder bars, coil overs, drag Powerglide, 3500 converter, 454 bored .030" over and made just under 750 to the wheels. On motor we were getting to an easy 9.80 on the street on full slicks. Truck weighed 2800lbs. Was scary fast and I traded it to a guy from Tennessee for an '83 Olds Cutlass Super Pro car.

[@2livediereal943]

Gotta 86 S10 with a tired 305 right now ls swap in the future nice truck she purrs nicely🙏🏾

[@Blitzkreger00]

Thanks my friend! Man look I like the 305. Doesn't get enough credit cause you can make it a nice little running motor. Check my other videos due to some major engine changes. Thanks for watching!

[@wild-firegaming4421]

Beautiful truck man

[@Blitzkreger00]

Thank's my friend. T'was a lot of work, lol. Thanks for watching!

[@XRZ0119]

What a beautiful set up. Thanks for showing !

[@Blitzkreger00]

Thank you for the compliment and watching! Check out my more recent content if you like.

[@ChristianYe-j4l]

Rear end and gear

[@Tommyp65]

Clean and tight. Beautiful!

[@Blitzkreger00]

Thank you! It's definitely a hand fulI. And appreciate you're compliment and watching!

[@thatruthhurts1670]

That’s a clean hot rod

[@Blitzkreger00]

Thanks my friend. And thanks for watching!

[@JohnAdams-nb2ox]

It doesn't matter what parts you use .if your happy with it then go with it. Your gonna have your haters out there. Doesn't matter what you use as long as it gets the job done. And in the long run you'll appreciate alot more.

[@Blitzkreger00]

Your right, haters and trolls will always find something to nit-pick about. I did what I wanted and it got the job done like you just mention. Thanks for watching!

[@JohnAdams-nb2ox]

Oh one thing for sure. Your not building up something to prove anything to anyone out there. That's why it's called a hobby. Sure there is always room for improvement on anything you do like this. It's done by trial and error. You learn things as you go. And it doesn't matter how far your into a build it it is completed. If I owned that truck I would drive it every damn day. I owe everything I learned from my late grandpa. "If it ain't broke , dont fix it". " Dont be afraid of it. Drive it how it was built to be driven". " a vehicle that you put your blood sweat and tears into never ever let it sit!" " Drive it!" I know times are tough these days with the world today and all, but you were able to bring something to this world that not only looks good performs most excellent and you can look at it and say damn I did a most excellent job. You have something to be proud of.

[@JohnAdams-nb2ox]

I have to ask: so where is the 4.3/4.4 at now?

[@Blitzkreger00]

@@JohnAdams-nb2ox Words of wisdom there. And I am very proud of myself and what I was able to accomplish on my first LS swap. The 4.3L is sitting at my brothers house. I'm looking at new prospects for that little engine now. A classic compact station wagon like a toyota corolla, datsun 510 or even a chevy chevette.

[@Blitzkreger00]

@@JohnAdams-nb2ox I will be getting it to my house very soon and going through it. I plan on still doing the work to it that I mentioned in one of my other videos but I'm going to change out the pistons from flat-tops to dish cause I want to run a turbo kit on it.

[@hotrod_kris9395]

Worth every penny, awesome job.

[@Blitzkreger00]

Thanks HotRod! Big changes coming in the near future. When it happens I will be posting a new video on everything that is getting and being done. Thanks for watching!

[@chris06young88]

Beautiful truck man!

[@Blitzkreger00]

Thank you very much! Glad you enjoyed the video. Check out my other content if you ever get board for more updated stuff. 👍🏻

[@cool62chev]

Beautiful truck. I'm in the middle of swapping my s10.

[@Blitzkreger00]

Thank you and awesome! I wish you the best of luck with your swap! Check it my other videos. Might have something there that may be off help.

[@trentdawg2832]

I have that same 70050 fitech unit in a box in my garage….i couldnt figure out how to run boost when i added a LSA blower…….N/A they work great

[@Blitzkreger00]

I haven't had any trouble with mine (knock on wood). And that's strange you couldn't get it to work with the blower and good to know. I've been looking into an LSA blower and was going to use it. I know mine has the NO2 and Blower setting in it. But I also sent the handheld and ECU to fitech for then to check everything after a year's time and they updated everything for me. I appreciate you're view. Thanks for watching!

[@817Ls]

Hell yea bad ass video. Look forward to more s10 content!

[@Blitzkreger00]

Thanks 👍🏼 Man check out my other videos cause I do have some recent content and have new stuff coming soon! Thanks for watching my friend!

[@andrel3]

Nice truck, I live in SE LA working on my LS S10 as well. I have some videos up.

[@Blitzkreger00]

Awesome! I'll give them a look my friend. Thanks for watching!

[@MrBuddy7798]

love the color . i has a 88 s15 that color

[@Blitzkreger00]

Thanks! And super cool. My first V8 s10 was an 88. If you get bored check out my other videos 😉. Thanks for watching!!

[@billreid11]

Like the remote relocation of the power steering reservoir in the highest point possible. Nice. Working good? Thanks.

[@Blitzkreger00]

Yes it is working fine! I wanted it at the highest best spot and the power steering fluid flows very well.

[@JTCustoms]

Very nice job

[@Blitzkreger00]

Thank you my friend! And thanks for watching.

[@zahidaguilar8888]

bad ass truck brotha

[@Blitzkreger00]

Thanks a lot! I appreciate the compliment and the view of course! If you get bored have a look at my more recent content 😉

[@jackperry9369]

Beautiful truck man keep em coming home about some race videos 🤣? I subbed

[@Blitzkreger00]

Thanks buddy! I appreciate the sub and hope you enjoy what you see on my channel! I have a bunch of other videos and a couple of shorts as well. Thanks for watching and subscribing! kzbin.info/www/bejne/nqqkdaKOZ7l1kLc

[@joeystrains.9316]

That's a nice ride!

[@Blitzkreger00]

Thanks! I try my best to keep it as clean as possible. Hard thing to do when it's a daily and have to deal with the elements. Check out my other vids of you like. Thanks for watching!

[@martinsavoy4964]

Definitely a nice truck. Good setup, and can very well go in the 10’s S-10’s are light man. Definitely enough horsepower to break the 10’s and some good tuning. Clean ride man ‼️🙏🏽💪🏽

[@Blitzkreger00]

Hell yeah! Thanks Martin! I have a bunch of changes coming. Trying to get a new video up soon as I have time and new changes lined up. Check out my other videos and thanks for watching my friend!

[@martinsavoy4964]

@@Blitzkreger00 not a problem man it’s all love. And I’ll definitely be tuned in.

[@jeffnatale1084]

very nice

[@Blitzkreger00]

Thanks Jeff! I appreciate it. Check out my other videos if you like. Some newer content there.

[@jeffnatale1084]

@Jeffery K yes sir, will do, have a 2001 in trying to get together

[@Blitzkreger00]

@@jeffnatale1084 👍 Nice. Good luck with that. And I hope everything goes super smooth for you my friend!

[@garagedays971]

Fantastic truck great sounding too.

[@Blitzkreger00]

I really appreciate it! Hope you enjoyed the video!

[@JohnDoe-qy4gp]

She’s beautiful 😍

[@Blitzkreger00]

Thanks a lot John Doe! Have a look at my latest video if you like. Thanks for watching!

[@crazypitt-o-vision7293]

hope to see some pulls videos. but it looks nice A.F. that blue sets it off

[@Blitzkreger00]

Thanks! I'm in the middle of changing up some engine stuff. Soon as it's ready to go I'll be putting it another video and maybe after that a nice launch video. Thanks for watching!

[@ThesiKCOne661]

Make a part list what you needed for the swap

[@Blitzkreger00]

Look in the description. There are links there for most of the parts used. And check out my swap videos. A lot of trial and error with parts list there as well. Thanks for watching!

[@dawsbonn]

Looks good! Bet its a blast to drive.

[@Blitzkreger00]

Thanks! Yes it's a handful LoL. Hope you liked the new video my friend!

[@mikejohns3104]

Really nice truck. You did a great job. I'm diggin it.

[@Blitzkreger00]

Thank you! I have some new stuff in the way. Soon as I get it back and the truck running again I will be posting a new video! If you have time check out my other videos. Thanks for watching!

[@mikejohns3104]

@@Blitzkreger00 I have been into s trucks since the mid 90's and have completed a few swaps myself. I will check out some of your other videos for sure.

[@Blitzkreger00]

@@mikejohns3104 awesome my friend! This is literally my fourth S10 and the third with a V8 swap and first LS swap.

[@jeanfonteli853]

Hello, what is the size of wheels that the cars has? 15x8 front and 15x10 rear? Beautiful project

[@Blitzkreger00]

Those wheels were Centerline Telstars 15x4 fronts and 15x10 rears. Thanks for the compliment. And thanks for watching!

[@WILLIAMS_RANCH]

Did you use factory hoses for the ac

[@Blitzkreger00]

Yes I did. I bought the ICT billet a/c bracket to use the stock 4.3L a/c compressor with Corvette accessories. Thanks for watching!

[@briandalton6077]

So nice S10 pickup good job

[@Blitzkreger00]

Thanks! And thanks for watching!

[@benjaminstevic528]

Sick build man!

[@Blitzkreger00]

Thanks! I really appreciate you watching and complimenting. You get bored check out my more recent content. Thanks for watching my friend!

[@Kevin-kb6uq]

Clean truck!!

[@Blitzkreger00]

Thank you and thanks for watching!

[@OOICU812]

Nice job man.

[@Blitzkreger00]

Thanks my friend! Glad you liked it. Check out my more recent video and see the changes that have been make. Thanks for watching!

[@Ronnie9710]

nice job!!

[@Blitzkreger00]

Thank you very much! Have a happy new year!!!

[@israelabad1304]

Great build Did you have to cut the front belly on the chassis to make the motor fit also are the headers they the steering long link

[@Blitzkreger00]

Thanks! No I didn’t have to do any cutting. Just slot of fitting with the LS Swap parts. Check out my other videos for more recent content. And thanks for watching!!!

[@ryanroshong2004]

Dig them wheels man badass

[@Blitzkreger00]

They came out in the mid to late 90's and I thing have stood the test of time! Just have to keep up with them so they don't fade dull. Thanks!

[@ryanroshong2004]

@@Blitzkreger00 yes agree I use mother’s mag and aluminum polish stuff works great

[@Blitzkreger00]

@@ryanroshong2004 Good Ol' tried and true Mothers Mag Polish. Stuff is awesome! Thanks for reminding me!

[@jordon756]

Wonderful and clean s10. I got a question if you don't mind me asking, I'm planning on doing a ls swap in my s10 soon I'm just debating on which engine to choose such as a (5.7l LS1 or go straight to a 6.0l lq4?) Just so I don't mistake it in the end.

[@Blitzkreger00]

Thanks! I ended up buying an LS1 that is in this video. Ended up being bad so I yanked it back out and stroked the LS1 5.7 350ci to an LSX 6.2L 384ci. Check out my more recent content to see how it turned out! Thanks for watching!

[@jordon756]

​@@Blitzkreger00 Appreciate it man, I'll definitely stay up to date on your content as it'll teach me how to work on my own engine and learn new things. I'll research about the LS1 5.7 350ci, and see which engine to choose from there! 👍

[@Blitzkreger00]

@@jordon756 Sounds like a plan. Good luck!

[@skrrttdaily348]

Damn that’s nice I can’t make up my mind if I want this model s10 or a Malibu it’s not to flashy and I know it gets down when you get on it

[@Blitzkreger00]

Man I was doing a 1978 Malibu back in 2004 but someone offered me money for the rolling chassis I couldn't refuse. And I'm not the flashy type of you know what I mean. Give it just enough to where it's still kind of a sleeper.

[@jasonw.1266]

I just hope mine looks half as clean when done

[@Blitzkreger00]

Thanks my friend! I'm sure yours will be look and be just fine when done 👍🏼👍🏼

[@murdyg7382]

I like how you didn’t notch the core support for the radiator to fit. Could you explain this process?

[@Blitzkreger00]

Thanks! Yes all I did was trim off the fan shroud but left where the radiator mounts to sit the bottom of the new radiator in. It fell right into the rubber mounts in the shroud. Then I made up one little bracket at the top kinda hid away. Between those two things and the radiator hoses being so short and tight it doesn't move. I will be making up a new top cover piece for a nicer look up top when I get time. I didn't want to cut anything cause I wanted the engine to look like a factory job if you know what I mean. Thank for watching and check out my more recent content!

[@Blitzkreger00]

@@murdyg7382 I was thinking of putting my discord channel in the link for questions about certain things with the build. I feel once you start chopping everything up it starts to look way more custom then factory. I have videos of the swap on progress. And thank you for subscribing!

[@heshtesh]

Damn you hit my fantasy meter when you said 20 mpg, if I behave myself I might be able to touch 10 mpg with my Sonoma.

[@Blitzkreger00]

🤣 Well sometimes you have to act right to get a few extra mpg LoL. I know I have with these high fuel prices. Thanks for watching!

[@heshtesh]

@@Blitzkreger00 I guess I should be happy it was set up and dynoe'd on 89 octane. lol

[@Blitzkreger00]

Hell yes! One of the reasons I wanted to go with the Blue Print SBC 87oct 383ci lol

[@Blitzkreger00]

Check out my more recent content. May have something there you may like and enjoy.

[@nativepatriot7017]

Clean ride brother 🤙,do you have the paint code?

[@Blitzkreger00]

I appreciate it! I do not have the paint code. I bought the truck stock with the paint job on it. If I had to guess I think I would lean towards "new Ford blue" or in that ball park. Check out my other videos of you get a minute. Thanks for watching!

[@nativepatriot7017]

@@Blitzkreger00 I appreciate that 🤟,yw

[@Blitzkreger00]

@@nativepatriot7017 my pleasure. Have a happy and safe new year!

[@frankflores2033]

Nice s10

[@Blitzkreger00]

Thanks my friend! I actually have the motor out of it right now.

[@frankflores2033]

I just bought a 92 s10 I'm gonna restore it from top to bottom sandblast the frame ceramic coat it and put a 383 stroker in it I like the wheels you got on yours

[@Blitzkreger00]

@@frankflores2033 I was going to do the Blue Print 87oct 383ci in mine before I went with the LS6. And the wheels are centerline terminator telstars. Super hard to find!

[@Pushrodlife]

Truck looks good! What s the name of the fans you using?

[@Blitzkreger00]

I appreciate it! The brand is SPAL. Great product! www.summitracing.com/parts/spu-ix-30101522

[@GSsg98]

What type of Brake Booster you have?

[@Blitzkreger00]

Its a 7" universal hot rod booster. Had to get the linkage with it to fit it to the brake pedal. Thanks for watching!

[@brandonwhite6501]

Nice build bro!! I’ve got a 93 that I’m gonna put a ls1 in it. What rearend are you running? Being on a budget like you I’m trying to do as much myself as I can. Thanks bro!!!!

[@Blitzkreger00]

I really appreciate that my friend! I'm running the stock 7.5" 10 bolt with a Posi gov loc and a 3.73 gear. I found a pre owned unit in eBay about three years ago for 300 bucks with the ring and pinion. Check out my more recent content and other videos on the LS Swap! I thank you for watching!

[@frkrcer]

Very nice build! I might have missed it if you mentioned in your vid, but what rear end is in the truck? Gears? I'm looking at building a 4.3 for my 91, basically the same as the previous motor you had in yours

[@Blitzkreger00]

Man I'm still rocking that 7.5 with a crappy gov loc and a 3.73. when she breaks I'll be repairing the 7.5 with some good parts. Truck is light and way less ring gear to turn with the 7.5 if you know what I mean. Did I mention it was lighter? Thanks for watching!

[@hottyscott100]

Love this truck! What brand name is that electronic Guage thing on your dash? I want to get one for my truck.

[@Blitzkreger00]

Thanks my friend! I appreciate it. It's an Autogauge 5" 8,000 rpm tachometer. Check it my other videos and thanks for watching!

[@hottyscott100]

@Jeffery K I'm talking about that square Guage that gave you your temperature readings and voltage and looked like a few other things. Has a little push button pad on the right. All I can make out is atech and google doesn't show anything for that.

[@Blitzkreger00]

@@hottyscott100 ohhhhh that's my fitech hand held controller for my stand alone Fitech 70050-1 engine computer.

[@hottyscott100]

@Jeffery K oh man! That thing looks awesome! I'm trying to find a reader that would plug into the obd2 port that would do what that does on your truck. I've tried a couple from Amazon and ebay and they are junk. You really knocked it out of the park with your truck. Sounds killer too

[@Blitzkreger00]

@@hottyscott100 thanks again! I really appreciate all the support for sure!

[@rrc75224]

Looks nice I’m starting a 1989 S10 LS swap. Any tips to avoid Summit.

[@Blitzkreger00]

Thanks 👍🏼 And no, summit and fitech have been rock solid on service and shipping times. Also along with no hassle returns. I have a list with most of the parts used and videos on what I done putting it in. Check out those other videos and thanks for watching! Good luck with your build as well

[@paulpowell195]

Nice bro like it alot

[@Blitzkreger00]

Man, I really appreciate that! Have some big changes coming. Should be making another video in the near future. Check out my other videos and thanks for watching!

[@chrishenderson4556]

What size rims and tires are those? And the name of the wheels? Very nice!

[@Blitzkreger00]

Thanks! They are Centerline Terminator Telstars 15x4 fronts and 15x10 rears with a 5" rear spacing. I think a 5.25"5.50" rear spacing would be better.

[@yellow7233]

What engine and frame mounts did you use? Did you use Holley for that as well? Thanks man super nice truck.

[@Blitzkreger00]

Yes I used the hooker mounts for the engine. I ended up pretty much using most the hooker S10 LS swap kit. Made thing a lot less complicated if you know what I mean. Thanks! And thanks for watching!

[@Blitzkreger00]

Oh, check out some of my older videos doing the swap. I have what I used there and links in the description for most of what was used to get it installed.

[@cascasero]

hey man where did you get your bracket for the AC? I like that set up...

[@Blitzkreger00]

Ict billet. They have a whole bunch of LS swap brackets along with other things. A little pricey but fitment was perfect. Thanks for watching!

[@zachcislo9090]

Dang she looks good man mine needed headwork once I’m don’t I’ll hyu so u can look at it if u want mines just a 350 but I’m making like 375hp around…also not jinxing nothing but I can’t wait till ur trans goes so I can see what’s up with that mines about to kick the bucket 😂😂😂

[@Blitzkreger00]

Thanks Man, All I need is more jinxing hahaha! As always I appreciate the comments and views my friend.

[@zachcislo9090]

@@Blitzkreger00 always appreciate the content 😂😂 u got one of the cleanest s10s out there in my opinion I love the blue and I’m sick of all these cowl hoods😂

[@Blitzkreger00]

@@zachcislo9090 thanks buddy. It's funny you say that about the cowl hood cause a good friend of mind mentioned putting a cowl hood on my truck and I said I'm tired of those cowl induction hoods S10'S lol.

[@zachcislo9090]

@@Blitzkreger00 seee that’s why we were here for the build 4.3 something newww pleaseeee

[@zachcislo9090]

@@Blitzkreger00 kzbin.info/www/bejne/gpzQgJJsh8R5d6M also look at thisss I think it’s still fit with no cowl and no point in dissing holly now (even tho u weren’t)😂

[@brianbizzell3027]

What cam are you running? Nice truck. I'm fixing to get the same manifolds and mounts. Also did you get the new ac evaporator half for coil clearance? How was the clearance for the rear drivers side coil?

[@Blitzkreger00]

I ended up buying the hooker cover for 140.00 to get more coil clearance. I didn't change anything with the A/C. Just bought the ICT R4 compressor bracket for 250.00. And the camshaft was a comp custom grind with lunati retro fit lifters. I have rebuilt this motor since then. Thanks for watching and commenting! Check out my more recent videos for updated content.

[@kevinordoyne6718]

An that's a bad ass truck

[@Blitzkreger00]

Thanks my friend! Have a look at my other videos for it has gotten even better! Thanks again

[@aidenbilbrey5653]

Does the ax make it run hotter or cooler

[@alonsogutierrez3437]

I got a question I wanna do a swap to a 4.8 ls. You think I can leave the tranny that is with the 4.3. Truck is a 1992 s10 If so let me knw and we’re can I buy the computer to do the plug and play

[@Blitzkreger00]

Yes you can use your transmission. You would have to make up some sort of TV cable bracket like I did. When I was doing the LS swap I did update videos. One of the last couple of videos has that in it.

[@josueguillen5053]

Sexy! I’m glad it’s coming together phenomenal

[@Blitzkreger00]

I appreciate it! It's looking good. I was actually going to go with the 295-50/15 rears but I couldn't pass up the bigger set.

[@dannybray2443]

If that tire store didn't change the valve stem and valve stem blowed out they would be by me another will you can Bank on that

[@Blitzkreger00]

Seriously. It really pissed me off for the simple fact that I just got them and they are super hard to find in that size and condition. Tried to explain that to them and they weren't hearing it. So I put the word out about them. I don't even know if they are in business anymore lol

[@Phatdaddy1986]

Where's the cowl hood?

[@19jody72]

Beautiful truck man! Congrats! What does the temp get to in traffic with thw ac on.?

[@Blitzkreger00]

Thanks! I really appreciate that. It would get up to about 220-225 on a super hot day. But normally stayed around 210-215. Thanks for watching!

[@19jody72]

@@Blitzkreger00 didn't catch what radiater you were running if you said..

[@Blitzkreger00]

@@19jody72 it is a 3 row Corvette radiator from ebay with the SPAL electric fans.

[@19jody72]

@@Blitzkreger00 👍

[@19jody72]

@@Blitzkreger00 If you put a cowl hood on it.. that will drastically help under hood temps. Also, a shroud qrapped around the fanson the radiater helps

[@beanstalkz4742]

What a clean fucking truck

[@Blitzkreger00]

🤣 Thanks my friend! I appreciate it. Check out my other videos to see updated content. Thanks for watching!

[@ambergonzalez9994]

Dammm💯💯💯💯💯

[@Blitzkreger00]

Thanks for that sweet damn and all the 💯! Check our my other videos for more recent content. And thanks for watching!

[@discmotoslots]

do you have the stock fuel tank? may be a bit small for a v8. sweet truck dude!

[@Blitzkreger00]

The stock tank I believe is a 19 gallon and I changed out the fuel pump to a unit that's good up to 600hp.

[@discmotoslots]

@@Blitzkreger00 If you put in a larger tank you can skip a couple gas stations haha

[@Blitzkreger00]

@@discmotoslots for real! 😂

[@troylane4323]

What's spec's on truck

[@TheYammadog]

Hey what fans you got and what size are they and where you bought them from

[@Blitzkreger00]

They are 12" SPAL fans. Bought them from summit racing. I have the link to them in the description.

[@19jody72]

Man, I'd say it weighs about 3000-3100 lbs.. if you get it to hook.. should be an 11 second daily. I am so tempting to do an ls(6), not an ls1, real deal ls6 swap, you have 405 hp to start with. Add.a 125 kit, you have a 11 daily driver.. its just the cooling temps sitting in traffic with ac that has stopped me

[@Blitzkreger00]

It was being a real pain as far as the temps go. But once I added the good fans and three row radiator and took out the eBay fans it cooled down a lot.

[@19jody72]

@@Blitzkreger00 have you seen Current Performance's cooling system for these trucks? Pricey.. but suppose the be the ticket.

[@Blitzkreger00]

@@19jody72 no I sure haven't. If the current coolant system doesn't work with the new motor I will possibly look I to it.

[@19jody72]

@@Blitzkreger00 yeah man, those people are the LS swap gods for the s10's.

[@devillenm5525]

Where are you located in in Louisiana? I am about to ls swap my dad's s10. He would have thought it was so cool.

[@Blitzkreger00]

Just north of New Orleans. And very nice! Good luck with the swap my friend!

[@devillenm5525]

@@Blitzkreger00 bruh after getting caught up on your truck I'm second guessing the ls swap! Lol I might just have to get a small block!

[@Blitzkreger00]

@@devillenm5525 the LS swap turned out nice and is modern. But they make modern fuel injection for older style engines now. If your truck came with the 4.3L I'd roll small block all day. A 400ci S10 would be dope.

[@devillenm5525]

@@Blitzkreger00 yes sir. 4.3 4l60e 93 extended cab. It's a Yankee cause it was born and raised in Shreveport until about 11 years ago and it moved south with me. Lol but it was bought by my uncle from the original owner. Then my dad bought it then he gave it to me not long before he passed away. He always told me that he was going to convince me into putting a small block in it. Back then I was happy with the little 4.3. Lately I've been kind of obsessed with the idea of having a v8 in it. Nothing crazy. I just want like 300hp I like to drive it. Since 2005 it's only had about 30k miles put on it.

[@devillenm5525]

@@Blitzkreger00 honestly my dream swap is the lv3 4.3 that was based off of the direct injection l83 LT motors. That would be sick. And not over done.

[@doublem6027]

How much would a paint job cost?

[@Blitzkreger00]

@@doublem6027 I guess it would all depend on the paint shop and what kind of paint job you are looking for. And also what the size of your vehicle is. In my area at decent pain shops they are around 3-5k dollars. Thanks for watching!

[@kevinordoyne6718]

What part of Louisiana u from I'm down here in lockport Louisiana

[@Blitzkreger00]

I am about two hours from you just north of New Orleans.

[@troylane4323]

What's paint code or color

[@dejaxo8646]

Who did the swap?

[@Blitzkreger00]

I did everything myself.

[@Chris-cu4ge]

What brake booster is that?

[@Blitzkreger00]

Check out this page from Summit Racing www.summitracing.com/parts/tff-2222na The eBay booster I used in this video went bad so I ended up going with this chrome unit. You will have to buy the universal brake pedal shaft to make it fit correctly with your pedal distance.

[@Chris-cu4ge]

@@Blitzkreger00 any mods to firewall? Stock master?

[@Blitzkreger00]

@@Chris-cu4ge actually I did have to make a little plate to cover some of the original master cylinder hole

[@chandlergardner6655]

Hearing premium being only 3.30 a gallon😂 man I wish it was like that now still over $4 for me

[@Blitzkreger00]

LMAO! Yeah that's a thing of the past. V-power here is around 4.90 a gallon. Ahh the good old days. Thanks for watching!

[@rodcarew1353]

What fan set up are you using? No offence but I couldn’t understand with your accent lol.

[@Blitzkreger00]

@@rodcarew1353 😂😂 You meant the cam? It's a cam motion 276/284 duration with .598/.610 lift on a 113+6 LSA. I hope that was the information you were looking for. Thanks for watching!

[@Blitzkreger00]

Fans were dual SPAL 12" fans. Took a second glance and seen you said fans, sorry.

[@rodcarew1353]

@@Blitzkreger00 thanks Man I’m trying to get my 98 s10 350 sbc running with ac but it overheats when I run it. I have fans on a good shroud but maybe they’re not cutting it. Any advice?

[@Blitzkreger00]

@@rodcarew1353 don't know if you already have this on your truck but a cowl induction hood should release a lot of that hot air. Or I'm a huge fan of the good ol clutch fan. You will have to move your radiator and condenser forward but clutch fans work well.

[@Blitzkreger00]

Oh and you can always try to add a pusher fan for your condenser.

[@colynbradberryvlogs7712]

how did you wire the headlights up to keep them stock

[@Blitzkreger00]

The headlights and markers are still on the original wiring. I ran new wires to the fuse box accessory connector for the markers to come on with the key.

[@colynbradberryvlogs7712]

@@Blitzkreger00 preciate it

[@Blitzkreger00]

My pleasure!

[@wreckanchor]

what brake booster is that? Was it a bolt on?

[@Blitzkreger00]

I had to make a plate to cover some of the original opening for the stock booster. After that it bolted right on. And I had to custom fit the linkage for the brake pedal. This is a universal brake booster set up. Click the links below. Thanks for watching! www.summitracing.com/parts/tff-2222na www.summitracing.com/parts/sum-760125?rrec=true

[@isaiasmadera6997]

What kind of brake buster you are using? Im planning to do mine to a 6.0l

[@Blitzkreger00]

It's a universal 7" hot rod booster. I had to make a plate to cover the stock booster mounting hole. And the universal linkage to custom fit the brake pedal. I got everything from summit racing I believe. Thanks for watching!

[@Blitzkreger00]

Oh and I do have videos of when I was putting the engine in. Kind of a little progress series lol

[@isaiasmadera6997]

Thank man

[@Blitzkreger00]

@@isaiasmadera6997 no problem my friend. Thanks again for watching!

[@stevefellers9349]

What brake booster did you use?

[@Blitzkreger00]

I used a 7” universal hot rod brake booster. I had to buy the linkage that worked with it and cut it to custom length so it’s set up like stock on the brake pedal side.

[@livintothefullest6821]

What exhaust manifolds are you running ?

[@Blitzkreger00]

The hooker retro fit exhaust manifolds with the hooker steering shaft. Super nice stuff!

[@_dirtyfab5337]

What headers did you use

[@Blitzkreger00]

Hooker exhaust manifolds for an S10 LS swap.

[@cliffbrown2566]

For sale??

[@Blitzkreger00]

Sorry but no lol. I have waaaay to much in it now to even attempt to take a loss. This engine ended up failing and I rebuilt it from top to bottom. Have a look at my most recent videos to see what's up. And thanks for watching!

[@mildbill222]

Jeffery K, sound like you from south Louisiana

[@mildbill222]

Can’t pinpoint it. Thibodaux?

[@Blitzkreger00]

@@mildbill222 I'm from New Orleans. I live about 25 minutes from there.

[@mildbill222]

I’m about 45 minutes west

[@Blitzkreger00]

@@mildbill222 I'll be working in tangi tomorrow lol

[@williechestnut7133]

Man thing is bad what tire pressure is best on front runners

[@Blitzkreger00]

I like to keep around 40psi in the fronts and around 20psi in the rears for better traction. Thanks for watching!

[@danielromo4341]

What offset are your wheels with width?

[@Blitzkreger00]

The rears are 5.00". I think 5.25" would be close but perfect.