Chevy Sonic Headlight Retrofit Part 4

The final part of the Chevrolet Sonic Headlight retrofit using the Morimoto mini-H1 Stage III system kit provided by:
www.theretrofitsource.com
www.theretrofi...
View the series here:
Part 1: • Chevy Sonic Headlight ...
Part 2: • Chevy Sonic Headlight ...
Part 3: • Chevy Sonic Headlight ...
Part 4: • Chevy Sonic Headlight ...
Components used in the install:
Bi-xenon Morimoto Mini Stage III (H1) kit
Bi-xenon Projectors
2 x Morimoto Mini H1 LHD (7.0 VERSION) $120.00
Compatible Ballasts
2 x 35W: Morimoto XB35 Computer $70.00
Ballast Igniters (Required)
2 x Morimoto XB Igniter (AMP) $30.00
H1 HID Bulbs
2 x H1: XB 6500K $25.00
Shroud Style
2 x Gatling Gun 2.0 $25.00
Wire Harness
1 x HD Relay: H11/H9/H8 $25.00
LED Halos
2 x 110mm XSB Switchback $75.00
2 x 120mm XSB Switchback $80.00

[@palakshah8558]

After watching all 4 parts, I know I do not have the patience nor steady hand for this project.

[@christopheralexzander4861]

Epic video thanks so much the only thin is that I tried to find the kit and is not available

[@DIYToona]

Their website got an upgrade since I first ordered the kit. I think the name changed slightly, but the contents stayed the same. Here is a link to the current kit. www.theretrofitsource.com/complete-retrofit-kits/universal-kits/bixenon-morimoto-mini-h1-stage-3.html I'll add that in all the descriptions. Thanks.

[@justinbutler9726]

How did you go about hooking up your relay harness?

[@DIYToona]

justin butler That’s kind of hard to describe. The primary power cables are connected directly to the battery. There’s an input receptacle that gets connected to the car-side cable that normally provides power to the factory headlights. Then the two output cables from the relay are run to the two igniter modules, and from the igniters to the headlights.

[@fooku5o]

Would you ever be willing to make and sell these?

[@DIYToona]

Dustin Bach “ever” would be a long way away for me. I really don’t have the spare time to make another set. Heck, I haven’t posted a new video in over a year lol

[@MyLonewolf25]

Where would you recommend placing the drivers?

[@DIYToona]

MyLonewolf25, that is an excellent question. I recommend placing the switchback drivers outside the headlight housing, but not in a permanently mounted fashion. Luckily they are not a component that gets very hot so try zip-tying them to the headlight wire bundle that lead to the housing.

[@merlynrogers1994]

The only reason I watched these videos was to find out how the lenses came out. What a waste of time. Pointless

[@DIYToona]

Merlyn Rogers By lenses do you mean the entire headlight assembly?