Chainsaw not oiling? How to easily fix/replace your oiler on a Husqvarna saw Repair Vlog

Chainsaw not oiling? No worries! Today we go over how to replace all of your oiler assembly parts on a Husqvarna 340 chainsaw. Hopefully after watching, I save you time, money and frustration in the future!
Find NEW Chickanic apparel at my on-line store HERE!!
chickanic.com/...
Want to show your support for my channel?
Find my Amazon Wish List HERE!
www.amazon.com...
Check out me singing "The 12 Days of Christmas" in this video!
• The BEST TOOL GIFT to ...
Want your own Wera tool set like mine? Find it here!!
www.amazon.com...
Need some Red Armor 2 cycle oil? Click here!
www.amazon.com...
Every year we get in over 2,000 pieces of equipment for repair and service, sell 1,000's of parts along with getting asked 1,000's of questions. We work on everything from, Briggs and Stratton, Kohler, Tecumseh, Honda, Echo, Stihl, Husqvarna, Troy Bilt, Craftsman, Poulan, Red Max, MTD, Remington, Scag, Bad Boy, Hustler, Chondas, Predator, Gravely, etc. The videos I make show some of the most common problems we see come into the shop. Hopefully my videos will save you time, money and frustration in the future!
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
Although very informative, these videos are for entertainment purposes. Please use all possible safety precautions when repairing and operating your small engine equipment.

[@Chickanic]

Thanks for Watching! Find a link to all of my "Must Have", Favorite Tools HERE!! www.amazon.com/shop/chickanic?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfchickanic_9ERPFPBNGQ924P8NS63B

[@wasntPete]

I found this site by accident and I am so glad I found it, no moo poo just straight talking and getting things done

[@theon_ean_donly]

I paid 200 dollars for this same job the mechanic didn't change the parts and 2 days later I had the same problem again didn't get a refund so I did it myself and now it's perfectly fine thank you for this

[@duncanharper4466]

You really take away the mystery and fear factor of working on small machines. Thank you so much.

[@digitalwoodshop]

Great Video. Took all the mystery out of oil pumps... Thanks for the tip on used motor oil... I have learned SO much watching your videos. Thanks

[@pnwRC.]

SWEET video! The tip about NOT using used motor oil is good to know. Dad ALWAYS ran that in his saw, & I was about to start doing it with mine. My saw is nowhere near as old as his was. I'm glad I watched this, BEFORE I caused major damage to my saw!

[@kenbrown2808]

the cheap bargain brand bar oil is only slightly better. my dad uses the cheap stuff and I use the good stuff, and you can feel the difference between my chain and his.

[@maxwell6504]

lol. oil is not the same at all. stupid to use oil. u will ruin ur saw. dont be cheap.

[@rogerbamatutz1927]

I never knew that bending to start a chainsaw could be so appealing.

[@uni-byte]

I have been blessed and have only had to repair one saw and that was a Poulan Pro. I got rid of that when it broke down a 2nd time in 1.5 years and got an Echo. That was 23 years ago. 5 years later added a small Makita (for dirt bike trail work) and just 3 years ago A Husqvarna 562XP. Touch wood, none of my other saws have had any difficulties. Not even the Echo, which still runs like a dream.

[@zachr.4711]

Great video. People like you make KZbin awesome

[@drockliff]

That was perfect. Exactly what I needed to fix the oil problem on my Husky. Thank you 🙏

[@AaronTheViking250]

between watching you the TinMan bell hopper power saws and the master himself Donny walker i have learned so much about the guts of a saw i only ran them never worked on them.

[@tracynorris355]

Challenge....if this wonderful lady has helped you fix your own equipment and saved you money...pay it forward. By a t-shirt or something me merchandise from her and help her kid who is trying to earn some cash by making the shirts...it's a win /win. Thank you for being so detailed and I fixed my first saw and feel confident that I can do it again if I need to...so happy! Merry Christmas and Happy and safe holidays to you and your family...ordering my shirt now!

[@tracynorris355]

Yeah ...proof read before you send, I know how to spell and I know the difference between buy and by...my phone does not. BUY...BUY...BUY SOME STUFF... 🤣..GEEZ And yes I did ahead of myself when doing the repair too 😆..but it was fun and didn't cost me to take it back off and put together the right way! 🥂

[@gillgetter3004]

My Pa’s old saw was a thumb operated oiler! McCullough I think it was and he would give me hell if it wasn’t all oily when I put it away!

[@arnoldtimg4393]

Thank you very much, your videos are very informative and I have personally learned a lot. Even thought I am retired from the automotive industry as a license mechanic, I still like learning and working on engines. THANK YOU AGAIN.

[@user-jy8qf5sx7f]

I love your videos. You are the best service woman in the world!

[@michelpaulcote156]

Thanks for great repair videos. I always learn something. Very appreciated.

[@MrPabco]

Another “Chickanic” 911 rescue. Thanks for another very useful saw video. Thanks for bringing us along 👍👍

[@daniellang6112]

Always a pleasure watching and learning!

[@stevesula5930]

Congratulations on your 80K.

[@freedomhigh2160]

Awesome video. I learned something about my husq chainsaw. I have an older 460 rancher and now that I know more about it, I hope to have less downtime with it. 👍🏻😁 thank you Chickanic ! I’m hooked on watching these videos because I love working on machines.

[@davidwilcox9110]

Crappy weather so learning from a great teacher!

[@joeb7607]

Thank you! I've used chain saws for over 50 years and I just got educated.

[@jeffreycanipe1936]

This was good to see. While I have replaced a number of oilers, i have never done one on a Husqvarna. Thank you for the education...

[@jimfreeman8991]

Great video. I am amazed at how long people will ignore a problem until it becomes a real big problem as this one had the potential to become.

[@m2rsvp]

Great macro camera work. Thanks!

[@rgrea2]

Thank You for the straight and simple oil issue repair.

[@geraldripps3523]

Thanks for the great video on a Husqvarna oil pump my saw is relatively new and quit oiling. Your videos are always clear and informative. I only had Stihl and Homelite in past and could not figure how to tackle this. You are right about chain saw oil. I use it on farm equipment roller chains (hay balers and combines) because it really sticks and lubricates better than other oils.

[@chisel83]

🇦🇺🇦🇺👌👌 that saw’s hot and not the temp hot 😆 Sexiest chainsaw start ever 👍

[@Chickanic]

Thank you!

[@w.rustylane5650]

I've got that same saw, a 340 and a 240 Husqvarna chainsaw. And a Poulan 4218 Pro. At least now I know how to tear it down for an oil problem. My 340 is a great saw and rips through logs without any effort. Cheers from eastern TN

[@sharonwiehrdt8752]

I am very relieved that your beautiful blond hair did not get caught-up in the clutch drum/sprocket or chain when you started the saw! I really enjoy your videos. - Watt

[@joegustin7158]

Great Work Chick

[@AlexV2904]

wish more people did this and shared their knowledge with others, instead of safe guarding knowledge for a economic advantage. Thanks again.

[@williamnorton5097]

I like watching you fix things and I have fixed many chainsaws also. But I have to ask why you don’t blow off things before you reassemble with new parts

[@stevet8121]

Great camera work. I could actually see all of what you were teaching us. I honestly wouldn't mind paying you to do the work though. You're the best!

[@billweb]

Thanks, Chickanic. My Husqvarna is weaping oil even while not running, glad this isn't a difficult task to check & fix. Plenty of oil while cutting, but needs to stop and not make a mess while sitting in the tool shed.

[@rodcros]

Your information was just what I needed. I located the plugged oil ducts on the bar of my 346XP and had it going in no time.

[@user-qp7bp4ct1w]

Thank you sweetie I’ve learned a lot from you

[@RaysLaughsAndLyrics]

Thanks for your time and expertise. Best of the Season to You and Yours.

[@Chickanic]

Thanks Darlin'!

[@roberttroxell7823]

i like watching these video's. this lady definetly, knows how to work on these machines.

[@billrogers3513]

Great video. Saved me from having to find a repair shop. Very thorough!!

[@chriservine8216]

impressed very professional and helpful thanks

[@user-pv8yx8qp1b]

You're a sweetheart you can really save my my my my my work

[@dougwachs]

I've got a husky saw similar to that one- in just two cuts my bar got all purple like that - I thought it was an oil issue, but it seems to be oiling some - I'll take it apart and check that I've got everything working that you showed - it was a big help - I've been subscribed for a few months - glad I got to see this one. Your videos are great and very informative - Thanks!

[@Chickanic]

Thanks Doug! Hope you figure it out!

[@rogerbollinger6499]

Very interesting to see you fix the equipment, gives me confidence to try.

[@Chickanic]

Thanks Roger!

[@stevewilliams1197]

Very good video. The way you explain things is very good. You not only show the problem but you show the solution as wll..

[@Tyroneguy77]

Love your videos don't know your first name but chickanic will do for me😀

[@larrywarolin7215]

I've watched many fixers and restorers, tractor guys and car guys on youTube. Most of us know most of their names. Some are excellent. You're cooler.

[@bradshore5163]

Just found your channel. Love it! Thanks for the help, repairing the oiler on my Husky tomorrow.

[@audiemullarkey9973]

Very well done at showing us this oil pump fix

[@delseckora5327]

Gee Wizz, you made that look so easy.

[@kenk3102]

...great quality video, Chickanic......in content, resolution and audio....please keep the DIYs coming... :)

[@Reno-pz3kt]

I appreciated this video, just ewxprience this same issue today

[@johnmccarthy2179]

You got a great way of putting things across, makes it easy to learn, cheers from the uk

[@gregmaxfield4405]

Lovely ! Just shows it is a must to maintain your saws' components. Gotta love the sound of a revving gas chainsaw. 🎅🚜🐻 Bear Queensland Oztralia. Love your work doll !!

[@Chickanic]

Thanks again Greg!

[@user-ve9es8dm7d]

Great Video,Thanks so much now I will be able to get My 357olin again😊

[@jimthumerzs6981]

I had this same problem. Still had it after doing this fix. Finally figured out that yup, I was using "bar oil" somebody gave me in a jug and it was way too heavy to run through the oilier system. One of those - spend a little bit for what you're supposed to use that works, rather that cheaping out on stuff that doesn't.

[@TheLawnmowerLady]

No doubt that saw was cutting terrible for a long while. You'd think someone would try and figure out the problem sooner than letting it burn completely up. 😱

[@Chickanic]

This particular customer doesn't ever have to funds to actually keep anything serviced. The saw came in with no air filter and a plug that looked like it came over on the Mayflower after it was used to dig out a coal mine! LOL! I think they don't realize that running your saw for those few more hours to finish cutting that cord of wood is going to cost you more than you are going to make off the wood.

[@dennisrobbins657]

Loved this video, now I know how to verify if my oil pump is working and how to fix it if not. I don't see the oil holes on my bar. Do all bars have those? Thanks for all the great videos. I love all the great instructions you provide.

[@careymcmillan2083]

Best tutorial that I have ever seen

[@billhauck7872]

Great info. Love your explanations. Merry Christmas.

[@erniecesana7496]

Always enjoy watching your videos!

[@btrswt35]

Makes me nervous with that long hair and rotating assemblies. Just be careful, things can happen in a instant.

[@philliphall5198]

It’s best to tie it up or ware a cap full of hair 😊😊

[@stevenandrews6627]

You do an awesome job with your posts!!!!

[@johnmitchell1614]

Hi Chic. I worked alongside a guy who had a side business a couple of years ago doing gardening/ sawing, and he swore by using old engine sump oil ! I freaked ! Told him all about the oil being spent but he wouldn't have it, DUH,, Anyway, you are the best. A really interesting and informative video. Thanks. Best regards.

[@Youtubecensoredmyusername]

If the oil were spent, your car would blow up. But it does have lots of contaminants in it and lots of carcinogens

[@mikefurness1598]

I had to laugh when you said bar oil was/is sticky. In the past I have used it to oil a motorcycle chain as well as bicycle chain. After all the chain oil for either is also a sticky lubricant. 😮😊

[@terrymccorkle1674]

Great information on the used motor oil. I've done it before in a pinch. Sure did have to refill a lot quicker.

[@larrymoore5427]

I like watching you, very informative on the fixes that you do .

[@johnegan6579]

Great tutorial, thanks

[@errolpoxleitner7901]

Good job on the oiler .

[@bentwedgestanleybrand5818]

Good morning everyone

[@jeffcameron7853]

Thankyou very much for this video. I've only just found your channel and this video was just what I needed!

[@joeorapellojr6417]

Awesome informative video. Thank you for sharing.

[@johnmclaughlin7406]

when cleaning the bar groove out , do not clean toward roller nose end. That tend to dump saw dust into the bearings.

[@jrgenrasmussen8840]

John mclaughlin . Just My word

[@andys8718]

I cringed when I saw that. Plus, do the job right and clean out the area where the new parts go!

[@adnacraigo6590]

Nice fix.

[@jamesweaver9636]

Listening to your intro, you must be a Mr. Ballen fan.

[@rogermcdonald1607]

Nice repair Bre! That saw needs a Superclean bath.👍🇺🇸

[@TheTungsten]

Learned something! Thanks!

[@delseckora5327]

Time to take a rest girl. Merry Christmas.

[@mikemccabe1324]

Husqvarna chain saws notoriously have Oiler problems. New saw. Full bar oil tank. Emptied completely out into the case. A buddy said he has the same 455 Rancher with the same problem. Floor in the barn soaked with oil. The oil cap completely seals the tank and I believe it gets vapor lock after a couple of cuts and doesn’t pump. Or the pump is sucking in air after it vapor locks and becomes air bound. The saw is new and genuine H bar oil is added only on the bench to avoid any possibility of dirt or chips/sawdust entering the tank The saw model used to, but now has a non adjustable Oiler. There is an adjustment direction embossed on the case casting that shows increase but there is no longer an adjustment screw. Took it to a H dealer. Said the bar hole was clogged. The bar had never been off to inadvertently get dirt in the bar lube hole. This saw needs a usb chargeable peristaltic oil pump and trash the worm gear pump. The pump feed rate controlled by a magnetized chain link with a Hall effect sensor to drive oiling rate. USB peristaltic Oiler can be pulsed before the chain even moves ultimately reducing wear. Or like a model airplane. A fitting on the muffler with a line (mini filter for carbon) to pressurize the Oil tank to overcome Oiler NPSH issues.

[@TheGreasyShopRag]

Mike what do you mean when you say the oil cap completely seals the case? There is a tank vent so it can't be sealed unless the vent itself is plugged. As for the bar hole, its connected directly to the groove the chain runs in. Thats where it picks up the dirt. These are very low cost systems that work well with just a little operator maintenance.

[@mikemccabe1324]

@@TheGreasyShopRag I would be interested in knowing the exact location of the chain/bar oil tank vent. It it must be plugged. Or maybe in the case injection mold process the hole wasn’t opened or has plastic covering the intended vent opening. I can get it to lube the chain on start up (cardboard spray test) but after a few cuts it won’t lube. It has to be vapor lock for the pump suction. I saw a post that said if the plate is bent that covers the pump assy the compression on the discharge tube is lost and it could just be leaking out before it even gets to the bar. The one video showed all new parts and he used sealant on every tube joint and even the tube suction press fit into the tank. Factory assembly is just a slip fit with no sealant. I’m tired of prepping to head to the “back 40” only for it to cut three cuts and then the chain starts having tightness issues caused by lube issues. Not the expected performance of a $450 saw.

[@TheGreasyShopRag]

@@mikemccabe1324 There are two versions of the 455. one one the vent is behind the tin disc on the clutch side. You can spot it by the bronze sintered disc about 1/4" diameter above a bar stud. On the other version its behind the starter under the air deflector, only about an inch or two from the fill cap.

[@mikemccabe1324]

@@TheGreasyShopRag Thanks. I’ll relay to my buddy with the same issue. I might just replace it with an adjustable pump that’s available. .

[@ultrasteve9031]

Thanks Chick, top work

[@donkimes2135]

All tags missing she’s probably hotter than a two dollar bill but I always wondered how they oil and now I know thanks.

[@ahdam82]

If you don’t have anything to clean out your bar the back of a butter knife seems to clean the grove in the bar excellent. Especially if you’re cutting wood that is moist will fill up your bar and plug up your Oiler port on the bar

[@ns4wsm]

Good info girl! I love your channel.

[@johnclarke6647]

I use high temp wheel bearing grease on the worm gear and sprocket bearing. I grease the sprocket bearing on husky saws with my grease gun using EP2 grease, as well as the sprocket nose bearing. I have an adapter that fits into my grease gun allowing me to use it to grease chainsaws. I don’t want a few little drips of oil off the bar. I want a clear defined stripe of oil on my workbench.

[@davidhibbs5114]

Great video

[@anthonyspeters7203]

Never had problem, but very useful for when l do!😘

[@danielpitre8620]

thanks a whole heap for the very informative vid

[@agkleppel6235]

well done, greetings from germany... merry christmas and blessings for year 2022

[@mikemccabe1324]

Btw nice review on the disassembly. I do believe that saw will be back. Ie what caused the needle bearing to fail? Plastic to melt? Gear to strip. I think the oil pump is encountering some sort of suction obstruction and then can’t pump. Locking up and stripping the worm gear assembly.

[@richardsullivan1776]

Very nice video. I'm pretty sure that's a Husqvarna 435. The 435's only have one bar bolt. I have the 340 and larger 350 both have two bar bolts. I love my Husqvarna Chainsaws. Also like how you pronounce it. Merry Christmas Ms. Chickanic!

[@olswole3658]

Fixed me right up 😊 thank you 👍💪

[@c50ge]

I had a good old medium size saw that I used on the ground. The oiler didn’t work. I cut the top out of a plastic oil bottle would dip the tip in oil every minute to lube the saw. (My Step Dad would say “poor people have poor ways”

[@oldmanfred8676]

Like the guy who said, “I don’t need Antilock brakes, I’ll just pump the brake 15 times a second”!

[@kleostrin198]

I like your channel very much. I have a husky 572 I would like you to make a video explaining how to and when to grease our chainsaw bearings. I think 572 and over have a different way of grease for the main bearings than 562 and lower please make a video how we do that on all husky's and please let us know how many hours from each grease is prope!

[@kylesavin6476]

Thankyou you are so helpful. And a pleasure to watch.

[@robrusso1178]

Cool video. I have a similar one. It oils but when the saw is off it continues to drip no matter how I store it(flat down or hanging) what could that be. I am now more aware what to look for now though. You are a great teacher. 👍

[@crustybastard1068]

Tks learned something today .

[@michaelspencer301]

Not to mention the mess it makes on everything. Used motor oil is a no no for bar oil. Intensifies bar and chain wear as well. 👍

[@inthebackyardwithdel438]

No number tags make me suspicious also . I have a friend that has a saw shop and he will send them right back out the door . Nice fix !!

[@halfbakedDIY]

Ms. Chickanic, I'm new to your channel and think your vid's are very well done and well explained. What did us DIY's ever do before KZbin tutorials taught us everything?? Keep up the good work.

[@Chickanic]

Thank you so much!

[@savageson42]

Since Both Model Indicators Were Missing. How Did You Determine What Parts To Order Without A Model Number?

[@dustyfarmer]

The engine number & model number would have been on the list of stolen power equipment the Police supply repair shops.