Chill Build: | RTX 4080 Super, Ryzen 9 9900X in the FormD T1 E-White

Рет қаралды 8,558

Chris Russell

Күн бұрын

Пікірлер: 63

@parallelfm Ай бұрын

Hi, thanks for the video! What length cables did you order? What were the order parameters?

@chrisrussellca Ай бұрын

Hi, MODDIY Ultra Soft Embossed Silicon Wire - Red CPU: 300mm GPU: 400mm 24-Pin: 200mm

@parallelfm Ай бұрын

@ thanks!🙏

@artmlg 24 күн бұрын

@@chrisrussellca and what GPU Cable Type?

@chrisrussellca Ай бұрын

Cable Details: MODDIY Ultra Soft Embossed Silicon Wire - Red CPU: 300mm GPU: 400mm 24-Pin: 200mm

@LEg04lmA 25 күн бұрын

Thanks for the info, I'm finding myself going for this exact build, what are the odds, lucky me :) First build ever and want to get this right. One question pops up : MODDIY's site seems to be built with only one selection of length for cables, how did you manage to order 3 from the kit at different lengths ?

@Athasin 23 күн бұрын

@@LEg04lmA You buy cables individually instead of full cable sets. Home page > Custom PSU Cables (to the right of 12VHPWR which is to the right of Home) > Extension Cables (section), then pick whether you want straight or 90 degree cables and just pick the cables you want.

@smallrtech Ай бұрын

Dope as always!!! I love the split screen while installing the cpu!

@chrisrussellca Ай бұрын

Thanks, these videos are usually stop gaps between reviews, give me more time to work more in-depth content, but I had fun editing this one.

@gemstone7818 Ай бұрын

impressive radiator fit

@chrisrussellca Ай бұрын

Thank you!

@rreacherr Ай бұрын

Clean build as always! Wish I could see some shots from the front of the case.

@chrisrussellca Ай бұрын

Thanks, I literally cut a few front panel clips because the case is very 2 dimensional. Images of the front on my community tab however.

@chibiribiri 14 күн бұрын

Hope the grill is in stock soon again...

@xanira6367 Ай бұрын

the contrast of the red cables looks so dope mate. Im also building a Formd T1 soon, and your videos have been pretty useful. Ended up going for an aio build with a regular and slim noctua after watching ur slim fan comparison. I might've made a mistake going with an EK aio, but luckily i used Paypal, so getting my money back shouldnt be an issue if they end up not sending it to me.

@chrisrussellca Ай бұрын

Glad you like them! be careful with your CPU pump height, i know some newer EK AIO blocks don't fit in 3 or 3.25 slot mode, depending on your GPU.

@xanira6367 Ай бұрын

@chrisrussellca yeah I made sure it would fit with the cover off (Looking to build with the 2.75 slot Sapphire pulse rx 7900 xt). Doesn't really matter to me since I won't see it anyway, but all of that won't matter at all if I don't receive it lmfoa 😖

@chrisrussellca Ай бұрын

Well you can always pick up an air cooler while you wait. Several good air coolers that maybe a option is the IS-55, X47FC etc.

@xanira6367 Ай бұрын

@@chrisrussellca that's good idea, I think I'm gonna do that actually 🥂

@Luemsa Ай бұрын

Amazing build as always Chris, you make it look easy, one question, how do you know what length to order your cables? How can I measure them?

@chrisrussellca Ай бұрын

Cable Details: MODDIY Ultra Soft Embossed Silicon Wire - Red CPU: 300mm GPU: 400mm 24-Pin: 200mm

@Luemsa Ай бұрын

@ thanks for the cable lengths

@Rom2D2FR Ай бұрын

Nice videa as always Chris. Could you please share to us the type and size of your custom cables? many thanks ;)

@chrisrussellca Ай бұрын

Sure thing! Cable Details: MODDIY Ultra Soft Embossed Silicon Wire - Red CPU: 300mm GPU: 400mm 24-Pin: 200mm

@Rom2D2FR Ай бұрын

@@chrisrussellca cool 🤩

@artmlg 24 күн бұрын

hi what those 2 FAN's under Tgrill combined with AIO?

@chrisrussellca 21 күн бұрын

Those are the Phanteks T-30s, 30mm thick fan, super popular.

@alihammad6318 Ай бұрын

Super nice, loved this! Can the T Grill with a 30mm thick radiator and 30mm T30's? Planning a custom loop in this with the T-Grill.

@chrisrussellca Ай бұрын

Yes, but it’s cutting it very close with 1mm to space and that could be subject to margin of error.

@matthewrezuke8130 27 күн бұрын

How quiet is this setup? My fractal ridge can get fairly loud on some games.

@chrisrussellca 26 күн бұрын

It's relatively quiet, the important thing is managing expectations. If you want true silence you'll have to compromise performance and/or thermals.

@Stuk4s 20 күн бұрын

How much is the build weight in total approximately?

@nakkamarra Ай бұрын

Nice videos recently, really liking your cable management. Did you run those tests against M2 concurrently or were they done separately? Could the ambient room temp have changed? I'm surprised that the temps we're lower on the T1

@chrisrussellca Ай бұрын

You’re correct, this is the same test results from the M2 video. The same build exactly. The thermals was lower in the T1 but that’s only because of the TGrill, if it was stock T1 then the M2 would won.

@Duplex39 Ай бұрын

I would really like a T1 version that you can fit the Arctic Liquid Freezer III without any mods (basically a stock version with the the grill on top and maybe 2cm wider case, not sure the exact amount). But maybe a 11 or 12 Liter version of the case.

@chrisrussellca Ай бұрын

Is it the quality that you seek from FormD because the M2 is a option. It’s not in a sandwich dual chamber design like the T1 but it can fit a LF3.

@jcorreiauk 22 күн бұрын

I wish the side panels could come in either silver or white to go much better with the white or silver variants, the black panels don't really fit well with my setup. If I were to paint it, what product/paint would you guys suggest please?

@chrisrussellca 21 күн бұрын

You’re not the first to want more side panel options, the Titanium is the only option with color matching side panels (other than black). You could always get the 3D printed panels printed, from EIGA and use whatever color you want.

@jcorreiauk 21 күн бұрын

@ will take a look at this so I can match something with my silver case. Thanks.

@chrisrussellca 21 күн бұрын

@@jcorreiauk it’s not the same quality but it’s a useful option and could lower the noise levels too if you suffer from side panel turbulence.

@goaliedavid30 Ай бұрын

Those temps are super surprising! I would have thought the M2 would have better temps. I wonder how big a difference a 280mm aio would make in the M2. Because I was thinking of changing from the T1 to M2 because of better cooling for my video editing machine and potential upgrades that are due for it later this year.. But from this, the T1 might just serve me well enough!

@chrisrussellca Ай бұрын

These temps are only better because the T1 has the TGrill and the warm air can naturally exit from the top versus the inverted configuration I tested in the M2, level 7.

@goaliedavid30 Ай бұрын

@@chrisrussellca Without the T-Grill do you think the temps would suffer significantly? Do you have another video of this build before you got the T-Grill with temps?

@goaliedavid30 Ай бұрын

@@chrisrussellca I would assume the CPU has better temps with the T-Grill, but the GPU would be pretty similar, but that just my theory!

@chrisrussellca Ай бұрын

@@goaliedavid30 Maybe. Both GPUs in this instance would not be in the best optimal situation, upside down vs sandwiched behind a motherboard.

@fritzcarlorosal3427 Ай бұрын

does flipping the psu actually make the temps better when using a 4080 FE/4080 Super FE/4090 FE card?

@chrisrussellca Ай бұрын

Not really but it doesn’t hurt it in my experience. EIGA did a short segment on this configuration.

@Ashleycb97 Ай бұрын

Hey bud, lovely build ? How is the PSU doing with the grill facing the GPU hot side exhaust ? I've heard against this usually but in my mind it makes sense it terms of airflow. PSU would come on under load regardless so why not help the gpu at the same time . How is it coping ?

@chrisrussellca Ай бұрын

Well, it’s a mixed bag. The 4080 FE passthrough allows it to pull air from the other side, however when hamming it’s basically pulling in warm air after the air passes through the GPU heatsinks. However that end of the FE card doesn’t get nearly as warm as the fan near the back IO plate. Also the warm air from the PSU is forced down but that’s the case even with the fan facing outward. So it’s a mixed bag. I haven’t had any issues and you can expect it to be 2-5C warmer than average. To me I prefer the heat rise over seeing the fan.

@Ashleycb97 Ай бұрын

@@chrisrussellca Thank you for sharing bud ! I think I will go this way too , much prefer seeing the shell instead of fan and rather not starve the FE card :)

@matthewrezuke8130 Ай бұрын

Wonder how much bigger the 5090 FE will be.

@chrisrussellca 26 күн бұрын

Hopefully not much bigger.

@matthewrezuke8130 9 күн бұрын

@@chrisrussellcawell, looks like it’ll be a 2 slot card. It’ll be perfect for this case.

@nutellasoos2298 Ай бұрын

How much Head room do u have with a 750w psu?

@chrisrussellca Ай бұрын

I’ll get back to you when I test the power from the wall

@spoorthyv Ай бұрын

I have a build with a 5800x3D and 4080 super. In gaming the GPU pulls between 280W and 330W stock but tops out at 360W when you increase power limits. My CPU uses max 115W in cinebench and around 90W in game but averages around 55W in game. Im assuming the 9900X will use about 130W max and about 65W in game. So in a worst case scenario this build would pull about 550W (accounting for fans and a 90% efficient power supply) and would prob average closer to 400W in game. Plenty of headroom.