Chinese Factory Creating Bladeless Fan Leads the Trend Wave

00:00 Highlights
00:25 Manufacturing of Fan Motors
05:14 Manufacturing of Fan Circuit Boards
12:04 Manufacturing of Fan Plastic Casings
15:54 Assembly of Bladeless Fans
21:24 Testing of Bladeless Fans
The purchase address for bladeless fans is as follows:
bit.ly/3qiSFC2
Note: The video contains subtitles in multiple languages, please manually select.
📧Contact：[e-mail]
0🎥0 Copyright(C) 2023. Miracle Process All Rights Reserved.

[@paulmaxwell8851]

A fascinating look at a modern Chinese factory. Clean and efficient!

[@user-yw4fn1mf4u]

They don't show the pile of dead workers swept into the corner...

[@WayneWang-ms9il]

@@user-yw4fn1mf4u hatre

[@drflat9223]

lol, if I invited you to my house, I would clean it up as well.

[@JamesCPLeung]

It was nice equips factory , hoping they can make further improvements.

[@ioannismaximovitch7196]

👏👍 Une remarquable chaîne de production ! Le soin apporté aux différentes phases de fabrication est excellent ! 🌹💐🤝💕

[@MarcosSilvaObel]

Awesome, thanks for sharing this video

[@davids6533]

I love my old Westinghouse table fan. I'm 61 years old, and it's several years older than me and still runs like new.

[@mikestewart4752]

They don’t make them like they used to friend, ESPECIALLY in China! 😂 “Made in China” stickers could be replaced with “100% Junk” stickers.

[@douglasalonso2440]

Cuando te sepulten pide que te lo lleves por qué lo que comentas es una mentira que ni tú abuela lo cree 😂 🤣

[@binarycrawler]

​@@mikestewart4752那你真的是太不了解中国了

[@mikestewart4752]

@@binarycrawler See! Your keyboard is broken!!!

[@binarycrawler]

@@mikestewart4752 You really don't know much about China.

[@wayneheigl5549]

totally amazing machines and workers are very precise and do an excellent clean top notch job, i am totally impressed with them and the fan they are building. great video. more please.

[@waterlife.1905]

+ 2 social credit for you.

[@maxcorrea]

kkkkk it's not entirely true, these "made in china" products are very bad... they spoil easily and do not allow repair. It is mass production, assembly labor is poorly qualified, the staff rotates a lot, rarely stay more than a year, so there is no commitment to quality ... it is not the fault of the workers themselves, but the market policy, government labor policy, population situation of the country ... in short ... it is a garbage factory ...

[@user-yw4fn1mf4u]

China is partaking in economic terrorism all over the world.

[@jaibusby673]

the word building is wrong you need to use a more appropriate word like manufacturing or crafting, building only applies to buildings e.g. what evergrande pretended to do.

[@wayneheigl5549]

that is how we say it here , i have been an american for 73 years and when you put some thing together you build it it could be a building , a fan, an engine , a radio. is always great to get an english lesson from some one in another country that you just gave a complement to. stick to (MANUFACTURING) your fans and stop talking down to people that complement you, not teaching them there language because trust me you are not an expert on the english language . because if you were you would not be on a (MANUFACTURING) line with all your friends making low wages. but thanks any way for pointing that mistake to me teacher , language expert. a thank you for your complement would have been very nice but i guess my complement was not good enough for you. next time i will not waste my time. @@jaibusby673

[@user-kx8zp7rt9n]

Felicitaciones a todos los trabajadores!

[@Ekriirke]

Very interesting. The PCB populating shows a manual/IR board being made with an empty footprint for an ESP8266 Wi-Fi/IoT controlled version - which is the one shown in the final assembly shots

[@theelmonk]

It also seems to show it being programmed at 11:00 despite not being present ? And conformal coating being applied over the pads .. Or is on on the other side of the board ?

[@JRCHICCO33]

The blades are internally in the turbine. Everything that generates a current of air has blades, except the atmosphere.

[@felipeoue]

Wrong. Exists more exceptions too, like high voltage fan without blades.

[@bltzcstrnx]

​@@felipeoueawful efficiency though.

[@jesusgciagcia]

And you own lungs 😂😂

[@macdowellandrew]

Thank you so much for sharing this beautiful manufacturing process.

[@miracleprocess]

Thanks for your comment !

[@drgeoffangel5422]

A lot of care and attention, and use of robotic assembly and testing goes into your products, well done, very good video!

[@masterQ20]

*Awesome thanks for sharing* 😊

[@josedeleon5718]

excelente trabajo. buen acabado y buena calidad

[@AAAAAS697A]

Качество?😂

[@jjjpk6291]

@@AAAAAS697A Look at your country's light industry first, then laugh at others.

[@zahir2023]

Chinese people are the most brilliant in this world !!! Hats OFF !!!

[@richmondene0413]

only the chinese? only "new best friends" would say that.

[@usmustdie4peace405]

What a BS comment

[@thuy1951usa]

Chinese can replica every things now if they have the ORIGINAL object.

[@Bianchi77]

Nice video, well done, thanks for sharing :)

[@eloimumford5247]

Thanks for all those workers producing practical products making our life better.

[@user-yw4fn1mf4u]

While sabotaging economies the world over...

[@spehropefhany]

20:44 safety testing with extreme high voltage (3,750V) Looks like a decent factory.

[@nemesissanity8132]

You mean 3.750 kV?

[@spehropefhany]

@@nemesissanity8132 They are the same on this side of the pond.

[@jimmybrad156]

20:41 the wiring is frayed! Accident waiting to happen..

[@1943vermork]

Thanks for the video. Love to watch assembly line

[@jaibusby673]

10:00 yeah isn't it NOT great to see young people solder with NO protection from fumes, gotta thank japan for their automation of some parts even if this assembly line is not fully robotic like it would be in most other places.

[@1943vermork]

@@jaibusby673 probably an order of magnitude safer than school in USA

[@jaibusby673]

@@1943vermork I doubt with all the Health and Safety stuff kids wouldn't be able to use a soldering iron, if so probably have to wear full face mask with carbon filter. Why are you relating this workplace to a school?

[@theonlybuzz1969]

Looks like a fun place to work in, just look at the happy faces of the workers, who are just eager to be chatting with each other.😀

[@miracleprocess]

In fact, most positions can communicate with each other, but during filming, it seems serious after all

[@TheWholesaleBusiness]

Impressive precision in bladeless fan motor production! 🌬 The detailed process from winding copper wire to final testing showcases top-notch quality control. The use of anti-static wristbands is a smart touch for protecting electronic components. 👍

[@jaibusby673]

H&S would have a field-day with your soldering practices these guys should not be breathing in the fumes

[@bastian433]

well let's add some comments for a section of the video. 6:00 the machine is applying soldering paste using stencils 6:21 reels with smd parts that will be placed by the pick and place machine on the pcb 6:24 the pick and place machine places the parts 7:47 the reflow oven solders the SMD parts in place 7:59 manual inspection if parts were soldered correctly 8:11 inspection with a machine if parts are correctly placed 9:08 manual soldering of 8-segment display and other/larger components 10:48 edit: more manual soldering 11:16 is not testing but programming a controller or chip. 11:28 adding conformal coating as it is called

[@antonmursid2714]

Hay👍🙏antonmursid👌🙏

[@antonmursid2714]

Hay👍🙏antonmursid👌🙏

[@alexdelara9858]

@14:16 - Warning about deadly noxious benzene, methylbenzene, dimethylbenzene: requires respirator @14:18 - workers wearing simple cloths masks @ all other times, simple chinese (I bet) cloth masks

[@gustavolopez3405]

8:47 el primer ventilador que veo y tiene aspas.... jaaa !!!!.........21:08 de nuevo, en la fabrica usan ventiladores CON ASPAS...

[@isaaclin1641]

On the production floor line, there is a regular table fan or bladed fan in a factory that makes bladeless fan. Kind of ironic🤭

[@rrotwang]

The photography is amazing

[@miracleprocess]

Thanks for your comment !

[@ronm6585]

Cool stuff. Thanks for sharing. 👍🏻

[@miguelhokama]

Asombrosa producción y ensamble de artefactos de última generación con riguroso control de calidad. Felicitaciones.

[@kasu7639]

Por eso duran tan poco.

[@eccentricsmithy2746]

Oh look, the bladeless fan has blades....

[@mytube9182]

But those are just fanless blades.

[@remoimondi9827]

ahahahaha

[@user-hk3jk9dq4l]

. 呵. 又山寨人家帶領潮流.

[@eccentricsmithy2746]

@@mytube9182

[@MrOukisee]

​@@user-hk3jk9dq4l真的,不要臉就可以天下無敵 說謊臉不紅氣不喘,尷尬的都是別人

[@jjjacer]

although technically bladeless fans have blades, its just that they air the blades create are funneled through a housing that does not have the blades visible to the user, but the blades still exist to create the airflow. sure its not a traditional style blade, it is either in a squirrel cage style like in a car, or like in this video it looks like an impeller you might find in a shop blower or in a vacuum cleaner

[@Greatdome99]

You're right. Airflow is created by an internal turbine then thru the large looped 'inductor' into the room. An inductor combines airflow from the turbine with ambient air which multiplies the flow. This is probably a Dyson product.

[@miracleprocess]

bit.ly/3qiSFC2

[@electroumit]

Thank you for sharing.

Excelente el trabajo en serie, cada trabajador un sector distinto. Saludos

[@MARINO351]

La Mayoria de los Trabajos de electronica son en Serie ..Lo que deja sorprendido es la Maquinaria que Utilizan para hacer estos trabajos como soldan y ponen las plaquetas con los circuitos integrado .y donde van algunos chips ..Bueno Aquellos que Construllen estas MAQUINAS DE ALTA RENDICION Y EFICINECIA SON UNOS GENIOS YA QUE TIENE QUE IR PROGARMADA CADA MOVIMIENTO CON LA COMPUTADORA Y A CUANTO A QUE LLEVA ASPA LLEVA UN ASPA DE UNOS 15 CM 1RO LLEBA UN PEQUEÑO MOTOR DE INDUCCION QUE HARA GIRAR UNA ASPA ..ok en el Minuto 14.05 una niña intruduce un ASPA DE COLOR NEGRO con varias aspas ..Sin aspas es imposible que tengas viento .. LA COSA ES QUE ES DIFICIL DE METERLE MANO Y ARREGLARLO YA QUE VA SELLADO Y AL HABRIRILO PUEDES ROMPER LAS PATITAS QUE VAN INTRUDUCIDAD A PRECION .. El ventilador comun la mayoria lo arregan es mas facil de meter mano y le pueden dar ma..A hora este tipo de ventilador No creo Tire o salga mucho viento ya que son demaciados los hoyitos que tiene y esto hara el viento expulsdo por el aspa lo detendra. ..Saludos desde Grecia un Chileno..

[@zabar8835]

Поражает трудолюбие простых людей, я думаю они достойны что бы будущее было за ними.

[@-.5684]

У каждого народа свои таланты...

[@user-rz2bh1ts1o]

Ты бы не хотел будущее, чтобы было за Китаем)) поверь

[@afganezz]

​@@-.5684и какие у тебя таланты. Водку пить

[@-.5684]

@@afganezz мы мусульмане водку не пьём. И будьте по вежливее с мусульманами...и не тыкай 🤫🤔

[@afganezz]

@@-.5684 а то че взорвешь себя. это твои таланты

[@AfrikanMan]

Very cool. Thankyou for this.

[@miracleprocess]

Thanks for your comment !

[@abdiastc3419]

Que ingeniosa creatividad con un excelente procesó de producción

[@Fredy181]

Si , lastima que el producto sea chino..

[@MrGanbat84]

Thanks for this company making bladeless fan. I need it because the safety of my son ❤❤❤❤

[@miracleprocess]

bit.ly/3qiSFC2

[@uoswaldo]

muito bom videos parabens

[@MrJohnnyKlayton]

Excelente trabalho! impressionante o sistema de fabricação desse ventilador e a mão de obra super qualificada em cada etapa do processo. Formidável!!! 💯💯💯

[@MarcosBaldin]

Congratulations on the organization and use of protective equipment for workers.

[@CooLDEaFY4204Me]

Fascinatimo video,….❤

[@giangang4330]

Nhìn công nghệ lắp ráp rất hữu ích 👍💯👌

[@kurucPista]

I like and respect hard-working, disciplined Chinese people! The 'west' loses against them.

[@rentapasiva]

In the Americas the workers would be talking about everyday stuff and even kidding each other, in China they have to be working silently. En las Américas los trabajadores estarían conversando de todo un poco y hasta relajando unos con otros, en China tienen que estar trabajando en silencio. What a big difference! Qué gran diferencia!

[@BlackPill-pu4vi]

You're right. We are not good slaves but, the American Sheeple have been on a long slave-training process for the past 40 years or so. GenZ is the fulfillment of this long social-engineering process and they will be ready to work in Chinese factories set up here in ZOG-U.S.A.

[@eugenec7130]

I worked in a factory in South East Asia. I had a chance to be trained in our HQ in US. What you say is true. The working cultures/attitudes in US and Asia are very different. Factory work is really not a joke. Discipline is absolutely necessary. People with relaxing and lackadaisical attitudes are not suitable for factory work.

[@merrick6484]

After de-dollarisation, over weight/ over pay Americans have to get back to factory again. When you can not afford imports, you better build everything by yourselves.

[@merrick6484]

When your pay was direct related to quantity of products you produced, then you will learn to shut up and work.😂

[@rentapasiva]

@@merrick6484 Typical leftist writing BS.

[@andersonferreiradasilva2692]

Linha de produção magnifica , equipamentos e mão de obra excepcionais!!❤

[@pablobaldomir9430]

Sii

[@betoka]

Excepcionais ? Soldas feitas a mão ? kkkkkkk Padrão Chig-Ling isso sim !

[@renielhenriquez6587]

Excelente la apertura de empresas chinas a mostrar su forma de trabajo y equipos con los cuales hacen sus productos, muy grato saber que hacen los productos de calidad y enfocados en que el producto cumpla con estándares de seguridad y calidad

[@jesusgciagcia]

Esta completamente copiada, no hay nada que esconder 😂😂

[@Granjgg68]

Very nice process

[@user-rj4ul9pd4m]

Выше всяких похвал!♥️

[@miracleprocess]

thanks

[@joaoavis3140]

China e japão dominam a tecnologia no mundo. Disso ninguém deve duvidar! O segredo está no investimento em formação, disciplina e planejamento! Coisa que no Brasil não temos.

[@hernandessilva2937]

Os sindicatos e esquerdistas imbecilizados não permitem o uso da disciplina.

[@ehenri1438]

hard to beat that production level

[@Jin88866]

There are lots of robots but it's clear that no matter how much automation you have, you'll still need workers. White collar jobs are being replaced by AI but robots won't be replacing humans in the factories at least in the next 2 decades imo. 9:47 so cute!!!😍

[@manuellinares1657]

Excelentes trabajadores y moderna maquinaria.Hace años bobinabamos estator y rotor manualmente y contando las espiras,y soldabamos a las delgas del rotor. Los chinos son dignos de admiración no paran de investigar.

[@andreykov]

Рекомендую посмотреть видео с завода Дайсон, производства моторов, полностью без людей, которое вышло пять лет назад 😀

[@ngooimeng8722]

Really an eye opener, it is a well plan work flow hope that workers are no bold to carry out same process day by day...Well Done to all.

[@miracleprocess]

Thanks for your comment !

[@MarcosMattosFotografia1]

Mão de obra humana e robótica atuando em perfeita harmonia. 😊

[@abnerrocha351]

Exato. Nenhuma das duas recebe dinheiro

[@semprequevoceleroscomentar2292]

​@@abnerrocha351pena que lá recebem pouco... Mas não é culpa da empresa, e sim do governo

[@tkabuzz9454]

@@abnerrocha351 soh falto pesquisa um poquinho... a média salarial dos chineses são maiores que a nossa...

[@tkabuzz9454]

@@semprequevoceleroscomentar2292 pesquisa ai Elias Jabbour-trabalho escravo na china

[@gvvggvgjj6724]

تبارك الله ، تقدم باهر في عالم التكنولوجيا ، شكرا جزيلا لمخرج الفيديو ،

[@yupingliao4078]

我看生產線員工很認真的組裝，想必產品沒有問題，消費者買的安心，炎熱的夏天到了，連我都想要買一台，

[@andreystya6644]

Шикарно! Чего я точно не ожидал увидеть - так это балансировку двигателей. Мое уважение

[@sepic5407]

балансировке подвергается лишь ротор

[@musjabusja7944]

а Вы считаете балансировку ротора пластилином достойным уважения? Или я что-то пропустил...

[@belojarswarojich7202]

@@musjabusja7944 вообще-то этим "пластилином" балансируют роторы двигателей почти все европейские производители бытовухи и электроинструмента, конечно те которые сами производят, а не перепродают китайское, или заказывают все компоненты на специализированных предприятиях, многие вообще никак не балансируют ротор, просто в уже собранном вентиляторе вешают на лопасти железные клипсы чтоб не сильно дребезжал и не заморачиваются. Так что да, балансировка эпоксилином ротора двигателя дешёвого ширпотребного вентилятора достойна уважения!.

[@belojarswarojich7202]

@@sepic5407И это правильно, если балансировать сразу всю уже собранную конструкцию, как это часто делают немцы и итальянцы в своих вентиляторах, то она становится недолговечной и неремонтопригодной.

[@sepic5407]

@@belojarswarojich7202 где посмотреть работы немцев/итальянцев?

[@forteswalmir]

MUITO SHOW FICO ADMIRADO COM TANTA TECNOLOGIA , OS CHINESES SAO SIM UM POVO MUITO INTELIGENTE .

[@MarcosBaldin]

O que mais chama a atenção é o foco que mantém no que devem fazer. Você quase não ouve a voz dosfuncionários!

[@flaviojuliojunior8938]

Não seria escravos a palavra correta?

[@lecosan2008]

capitalismo, meu caro, se não gosta vai pra Cuba.@@flaviojuliojunior8938

[@samuelsechter1899]

@@flaviojuliojunior8938 talvez, mas não tem bagunça, quasi não cometem erros

[@user-vp6fg9ti1l]

Ого-го как интересно было глянуть на такие технологии.

[@videokaraokethanhtungkarao1714]

Công ty này được mỡ tại việt nam thì rất tuyệt vời,rất mong sẽ có nhiều công ty tại việt nam🇻🇳🇻🇳

[@avidaurbana]

É o ventilador sem hélice com hélice, que invenção maravilhosa!😊

[@suprememasteroftheuniverse]

Tudo escondido na base, uma espécie de "turbina", um mero compressor de ar. Esse golpe do bladeless fan tem décadas e saiu de moda mas China sendo China.

[@AbisaiAlves]

🤣🤣🤣 hélice embutida virou sinônimo de "sem hélice". 😂😂😂

[@avidaurbana]

​@@AbisaiAlvesÉ verdade! O título do vídeo diz:"ventilador sem lâminas "mas tem lâminas!Como o próprio vídeo mostra!😅

[@dalblack1.0canalgeral56]

kkkkkk pois é 🤣🤣🤣🤣🤣🤣

[@gustavolopez3405]

8:47 el primer ventilador que veo y tiene aspas.... jaaa !!!!.........21:08 de nuevo, en la fabrica usan venitiladores CON ASPAS...

[@user-mq3lj9jc3t]

淘宝上搜“浙江弩牌电风扇”出来是个什么“日本SK”的牌子，估计这是家OEM。有个风扇像是视频里的这个，卖655块。 At around 90+ dollars (655 Chinese Yuan, or RMB), it's much cheaper than Dyson, yet still expensive for average Chinese consumers.

[@miracleprocess]

bit.ly/3qiSFC2

[@carlosvillarreal5919]

Un sin numero de trabajadores , maquinaria especializada muy costosa , ingenieria de punta , buen control de calidad ,piezas perfectas , es increible , muy buen video bien explicado el proceso, me gusto mucho , gracias .

[@miracleprocess]

¡Gracias por sus comentarios!

[@jaibusby673]

Un número innumerable de víctimas desprotegidas, maquinaria muy extranjera, ingeniería con derechos de autor, buen ambiente contaminado, partes de 10 centavos, es triste, muy buen truco de salud y seguridad, qué BROMA LO ODIABA, cuide la salud de sus trabajadores.

[@jjjpk6291]

@@jaibusby673你真的关心那些人的健康吗？傻逼，在这里带你妈逼的节奏呢，操你死妈的

[@MARINO351]

Todos los Trabajos ELECTRONICOS SE PRODUCEN EN SERIE HOY DESDE UN ESTE .ej .VENTILADOR .RADIOS .TV. MOVILES .O SEA TODA LA ELECTRONICA ES PRODUCIDA ASI ..Lo que A Mi sorprende es la MAQUINARIA que utilizan . Son unos Genios los que construllen esta Maquinas para poder hacer otras maquinas...La progarmacion que tienen esta maquinaria ..1ro tomar las plaquetas con los circuitos integrados instalar y soldar chips .y diferentes compuetos electronicos en miniatura Y todo va controlado por una COMPUTADORA ..Aca No Hay nadie que Haya visitado una Industria que hace esta tipo de Maquinaria .bueno creo que las haran del mismo modo . Y a cuanto a que TIENE ASPA EL VENTILADOR TIENE .en los 1ros min te dice motor de induccion electrica ..aca esta el motorcito que hara girar una Elice.. y en el minuto 14,05 aca una niña introduce una elice negra de unos 12cm con varias aspas .Por favor sin un aspa que gire No Hay viento Lo que decen con esto es 1ro que NO LE PUEDAS METER MANO AL VENTILADOR .TENDRA UNA SOLA VIDA PORQUE AL HABRIR ESTA SELLADO Y SE PUEDES ROMPER ..LAS PATITAS EN LAS QUE VAN A PRECION y A CUANTO A EFECTIVIDAD no SE SI SALDRA MUCHO VIENTO POR TODOS ESOS HOYOS YA QUE SON TRABA QUE CORTAN EL VIENTO ..Y no el Ventilador comun lleba la ELICE FUERA .esto hace acomular mayor viento por cm"2 y lanzarlo .Pero la mayoria Hoy los arreglan y tienen una vida mas duradera ......Saludos desd Grecia un Chileno

[@jenghaohuanglin7441]

Los chinos son demasiados creativos. Bien por ellos.🙏🙏👍👍

[@Jptoutant]

great workers, great process

[@Paramecio_Z]

Buen trabajo. China espero que aporte al mundo mucho mejores cosas que las que ha aportado el avieso Gran Hegemón Yanqui. Europa no es más que un siervo lacayo de EEUU-OTAN. Ahora USA en 2023 está moviendo el avispero y en su decadencia intentará arrastrarnos a todos. Admiro la disciplina y la capacidad de trabajo chino. Espero que seáis mejor superpotencia que el depredador Tío Sam.

[@isocooool]

일하는 분들 건강을 우선하는 작업장 되길 바랍니다

[@miracleprocess]

ok

[@charleymendesdesousa567]

awesome process

[@blacklabel810]

Thank you for sharing your fan making experience. The most interesting video I've ever seen 👍

[@yukuzoona6604]

🤪

[@Alejandrocasabranca]

O Brasil precisa dessa industrialização 😮🇧🇷😍

[@silviocavalcante3617]

Já teve governo após governo foi sucateando a indústria nacional

[@SilvioTiti]

Os governos desmantelando universidades e centros de pesquisa não tem como, o vídeo mostra só a parte braçal da montagem, mas quem faz o design e a manutenção de esse maquinário com estudantes brasileiros mal formados?

[@andersonalves5462]

Continuem fazendo L!

[@romiagua2746]

Isso será muito difícil, o mundo escolheu esse país para que plantasse e alimentasse o mundo. Tá bom assim. Alguém precisa fazer a comida para os outros que trabalham nas fábricas.

[@anarchistepicureu2781]

enquanto o dolar estiver nas alturas pode esquecer (dependência industrial)

[@gillaybhutia2727]

So these is behind the scenes of innumerable Chinese products. Impressive.

[@youmasterable]

es alto el desempeño laboral de los chinos. buen video!!!

[@miracleprocess]

thanks

[@sonphamngoc1366]

Very Good !

[@jeanmaries4147]

Une vidéo très technique, ou l'on voit le procédé de fabrication dans sa totalité. C'est très bien d'avoir filmer les visages des techniciens et techniciennes, ils ne leur manquent qu'un petit sourire. Mais la concentration est au maximum pour ne pas faire d'erreur.

[@benhuroliveiramorais]

bahh que bonitos heimmm - gostaria de ter um destes ...

[@miracleprocess]

bit.ly/3qiSFC2

[@cyclemotor6704]

感谢分享

[@DAS-Videos]

Pretty neat. I would like to work at that factory.

[@davenordquist4663]

Looks like good ventilation/filtration at the 5 extra hand soldering stations. I wish they had one press-fit manual station instead (maybe chase it with a light-soldering pass somewhere in the oven) and the vanes had nanotextured finish to farther refine turbulence. Maybe the motor component design has had a 5x engineering pass by now too (more bearing and rotor ventilation, less pin service?) All injection molding needs to be a lignin/bamboo process in production...no paint, only structural color gravure/light pulse. Love the care the electrical passivation painter puts in, even if it should be automated and the assembly parts reduced (base power passthrough: why do I exist?) so the workers can (safer, recovered solvents) enamel or paint fine scrollworks or Space Communism Edition fans and more artistic air inlet screens or something. Electrical safety testing OTL why is this state of the art but good going. Obv. all processes with workers need to have lots of plant scrims (moss or plantings and their grow lamps etc.) but they get in the way of filming, which is done well here.

[@ChicClosetChronicles]

很棒的频道，之前只看到韩国人和日本人在油管做这种频道。半年能做到这个超级非常了不起，希望你们能够继续努力，把中国制造精彩的一面带向全世界

[@ChicClosetChronicles]

@@user-uq8ny5id6u 第一枚芯片是台积电发明的？

[@bwli2894]

@@user-uq8ny5id6u人家只是说中国制造而已，没说中国发明，你这是明显的看见中国两个字就要无脑怼

[@victoriagodinez2341]

Hola los felicito muy buen video q padre ventilador saludos des México

[@miracleprocess]

Thanks

[@user-rq9jl3ny3j]

روعه في العمل الى مزيد من التقدم والرقي 🇮🇶

[@user-en7pf8xz3u]

أين؟ تعال ووجدني في دمشق

[@wayneheigl5549]

no need for humans any more to build circuit boards any more, machines are more accurate and precise and a hell of a lot faster. people just fix and watch the machines. truly amazing and very impressive , they have a fan with blades cooling off people making a fan with no blades. lol . love the Q.C. as they build. very nice fans and great video. more please.

[@miracleprocess]

I will

[@karl_ledebur]

3:53 На фабрике БЕЗЛОПАСНЫХ вентиляторов используют лопасные 😉

[@paksupriyanto3888]

Terbaik 👍👍

[@carlosdavila4164]

Excelente tecnología saludos desde colombia 🇨🇴

[@miracleprocess]

¡Gracias por sus comentarios!

[@1TIU1]

deve ser tão bom o produto, que na fabrica eles utilizam ventilador com lâminas kkk

[@detectaminasgerais]

haha justamente tamb percebi

[@wesleybp]

Mais um produto pra enganar trouxa que adora uma novidade. Já vi um desses ventiladores a água. É ineficiente e incapaz de resfriar. Num pais como o Brasil, nem ventilador convencional as vezes resolve, quanto menos um brinquedo desses aí.

[@balee15]

É igual fabricação de carro elétrico.. muitas máquinas a diesel ...e os caminhões que levam a peças TB a diesel 😂

[@bartobruintjes7056]

In the U.S. we don't have companies anymore that can produce on such a scale.

[@peterisaloftpc4093]

BS

[@bartobruintjes7056]

@@peterisaloftpc4093 What BS??? Keep on dreaming. Our government has destroyed manufacturing companies and replaced them with financial companies.

[@kimduong2332]

@@peterisaloftpc4093 BS, really! Any product manufactured in America? Even the Boeings which America is proud of are assembled with spare parts produced in many different countries.

[@jalechavez6042]

Genial...!..gracias por Compartir..Saludosss.......

[@gazibayraktar2380]

Bu çinliler bir harika,çalışkan insanlar... Tebrik ederim...

[@miracleprocess]

thanks

[@Ruinskiy]

Любопытно было посмотреть на процесс. В мире полно людей которые верят что многая продукция появляется ниоткуда

[@TearsOnAWind]

некоторые думают что и люди появляются из ниоткуда

[@elshan5345]

Многие воще не думают живут эмоциями

[@eduardopal650]

A tecnologia desse país é incrível.

[@user-to3vu2mu1r]

Какие безлопастные если крыльчатка все же есть?

[@tyrykmakto6682]

@@user-to3vu2mu1r это маркетинговое название, лопасти спрятаны внутри и о них не пораниться когда вентилятор включен.

[@gadoxipado]

20:31 o produto é tao bom que a própria fabrica usa ventiladores de helice kkkk

[@ernestocabrera8596]

tecnicamente es una turbina no una helice.

[@phule7800]

Vẫn xử dụng cánh quạt nhưng dc dấu bên trong,nên quạt truyền thống vẫn dc tồn tại trong công xưởng.

[@koreaelevator]

I enjoyed watching it

[@pierri8056]

Linha de montagem fantástica. Se alguém sorrir e demitido!!

[@user-di6oi4cl5g]

Trabalham como um robô sem sentimentos!

[@jacineywanzeler8997]

Incrível, cada funcionário tem uma função nem que seja somente para apertar um parafuso

[@TalesMilleto]

Claro, a velha e funcional "divisão social do trabalho". Que Marx criticava, mas que possibilitou o desenvolvimento do mundo moderno.

[@jonyfelix600]

​@@TalesMilletoque Marx o caralho quero que comunistas sifodam

[@doutorleco]

Todos ali pertencem a mesma classe, não há divisão social ali, todos são peões. Na época de Marx, os que detinham capital explorava os que não detinham, 16 hs de trabalho ao dia, só pra citar um exemplo. A pessoa tem que saber ler Marx.@@TalesMilleto

[@quandovcestivernoyoutube]

Marx criticava a exploração, veja como era as condições de trabalho da época.@@TalesMilleto

[@CassinoBrasil-fp4bm]

LINHA DE PRODUÇÃO QUE EXISTIA NO BRASIL TAMBÉM.......... E HOJE ESTÁ TODA SENDO TRANSFERIDA PRA CHINA..POR ISTO A GENTE TÁ FICANDO PRA TRÁS E A CHINA CADA DIA MAIS RICA......OS SINDICATOS SÓ QUEREM DEFENDER O LULA E SUAS PEDALADAS EM TROCA DE DINHEIRO E CSARGOS NO SEU DESGOVERNO ...E POR ISTO O POVO CADA DIA FICA MAIS E MAIS DEPENDENTE DAS BOLSAS MIGALHAS E ESCRAVO DESTE DESGOVERNO COMUNISTA E QUE SE AJOELHA PRA CHINA E PROS GLOBALISTAS !!!!

[@MedSou]

*Awesome* 💙💙

[@igorzavadski257]

Как это давно у нас было.Все похерено .😭

[@kokosasha69]

молодци братья китайцы😍

[@georgeadams1584]

А не скажите кто делал такие машины для китайцев?

[@vladimir-dxdx7653]

@@georgeadams1584 На станке написано было Ямаха.

[@pvrajurj]

Excellent😇😇

[@user-ek3bp6hj9c]

Beautiful

[@springburo]

really interesting and it shows how complicated even a fan is. At 14:08, removing the burs we see the edges being removed, but there are ridges on the surface of the fan blade from the moulding which would create noise and turbulence. Generally the quality here doesn't look so good

[@MonkeyDelicious]

This type of manufacturing is Class 2 or 3. Which means the finished goods are no critical. In turn they can fail without causing catastrophic events.

[@fukhue8226]

Not Dyson quality. I wouldn't get excited until I see the performance and hear the Noise Level!

[@Anson_AKB]

14:08 is the spot in the video where the blades of the bladeless fan are shown ... it's all a matter of definition, whether a fan without visible blades that still has some hidden blades of any kind can or should be called "bladeless" ...

[@jaxxonbalboa3243]

3:43 For a company making bladeless fans they sure have plenty of bladed fans cooling people off!

[@bobswrigles8636]

Probably cheaper to buy than to use their own products

[@merrick6484]

Different fan for different purpose, and you don‘t neccesory consume what you produced. Fishman don‘t eat fish whole day, do they?

[@MuckSpreader99]

Blowing solder fumes away.

[@hatschi3845]

Cool!

[@HaneefChillOut]

มันเจ๋งมากครับ

[@AppliedCryogenics]

14:05 - preparing the blades of the bladeless fan

[@jeancharlesc.6290]

that's what i see too , see blade and conic blade lol .. there is no propeller , I think an abuse or misinterpretation of "blade"

[@user-cy6iw2wg4e]

It's a good job that is hard to imitate as it happens with blade fans But I hope this is a reason for the high price Also, the appropriate price is a good thing that cannot be overlooked

[@alvinchua2000]

i'm sure the price is just a fraction of the famous brand Dyson

[@miracleprocess]

189$

[@pmpwiz]

@@miracleprocess Only $110 if you buy 100 or more units. 😉

[@BlackPill-pu4vi]

The actual cost as it leaves China is probably $30. The retail in the U.S. is $189 per miracleprocess's quote. The giant gap is arbitrage in action and our parasitic overclass is perfectly positioned to skim the lion's share. Thank you Milton Friedman and Reaganomics.

[@gustavolopez3405]

8:47 el primer ventilador que veo y tiene aspas.... jaaa !!!!.........21:08 de nuevo, en la fabrica usan venitiladores CON ASPAS...