Chinese fake watch waterproof test

Hello,
I tested the waterproof performance of a Chinese fake watch.
As expected, the waterproof performance was not good compared to the original watch. Please refer to the video for details.
Thanks.

[@oaktree1628]

It would be interesting to find out if the water test failed because of structural defects on the watch itself, or because of a faulty seal which was not fit properly or could be easily replaced with a better seal or gasket.

[@sssss640]

With such quality most of people would buy, not everyone is a diver ... as long it is high quality and can stand up 50m , then it is great and more than enough

[@telomnisi3048]

Thank you for making these videos. Please continue showing us other super replicas such as the royal oak and Nautilus V3s

[@e99g]

A nice video and congrates to your new waterproof test device 😄

[@watchmakerjd8525]

Thanks for watching😀

[@tagheuer3488]

Hi friend, this is a very interesting video I hope someday you can test a CLEAR FACTORY watch, are becoming very popular nowadays…. Thanks and greetings from Mexico

[@GENTSEVE101]

For me its 100 meters and a screw down crown minimum if im bringing a watch near water. My first auto was a seiko 5 srpa11k1 diver rated to 100m. Moisture made its way in while i was washing the dishes. Couldnt believe my eyes.

[@Microbc]

Does it matter that you had it set up to test a 20 -40MM watch but the Seadweller is a 43MM watch?

[@alanaliyev456GT]

Dry test is the hardest ... because air molecular enterveasy in case ! Water with his superficial tensile canot enter so easily

[@alanaliyev456GT]

Helium even at 2 bar enter in case ( its why helium valves exists )

[@alabamadeep4471]

Did you tighten down the back?

[@Tarunika-Drishti241]

We need to stop criminals like ziarex from selling mega-clone replica watches because selling mega-clone replicas with the same serial number as the original watch is illegal.

[@fontyyy]

Ironically it's probably the helium escape valve that leaked! Unless the caseback seal failed, generally if serviced these are all fine to get wet. Besides on the TD websites they're all only stated 50m waterproof which is basically, yeah, it can get wet, but don't take it underwater.

[@Enoch-Gnosis]

5 bar is good enough for me!

[@emmetg888]

Can you tell what depth the watch failed at

[@Mikegritz]

Do these factories like ARF make good version 16610 (5 digit) as good as the current versions 126610? I like the older versions of the watch more than newer one, but I think the newer versions are better rep than the old versions.

[@superdiver.]

ARF is one of the best if not the.

[@Kam-Bogey]

People aren’t buying these to go diving with them. Just like 99% of people that buy the genuine ones.

[@011bgd8]

Nice video. Can you waterproof the watch and then repeat a testing?

[@joaomauriciobasiledesouza6204]

I was thinking about the same. Give it a good service, check and lube all the seals and repeat the test.

[@stevendelgado7347]

🤯 wow never knew fakes were getting this good

[@johnsimkins2484]

Anything beyond 65 meters is helium mix diving which is pro diver territory anyway. 50m is fine for 99% of people’s needs.

[@samwadi8638]

Great video, what is the name of the machine I would like to buy one

[@mrld3005]

where you bought that watch?

[@uglydoor1]

I wonder if this is a pcheap copy or a super clone?

[@thomasnyborg6233]

What factory is this watch from?Any factory that is better than other ?I enjoy your videos.Keep it up..😊

[@e99g]

Just send your rep to any watchsmith and waterproof it there properly

[@kingghidorah9856]

Arf

[@3dhdprod843]

@@e99g I highly doubt most watch smiths would want to waterproof illegal counterfeits.

[@mapled3135]

@@3dhdprod843please. Are you being serious?

[@PC-eh8kp]

Nice Video! Could you do a waterproof test with the Speedmaster to bust the myth that she is not waterproof for swimmining? Greetings from germany!

[@watchmakerjd8525]

Swimming with the speedmaster will cause leak problem😅 Thanks for watching :)

[@mrmagoo.3678]

I had to get my speedmaster serviced/repaired after going swimming

[@cyanah5979]

Thanks for your video. Since normal sport divers don't go any deeper than 30m, a 50m test already would be sufficient :)

[@hochspannunglebensgefahr5339]

No it wouldn’t. If what I think you mean is right dive watches need to be at least 200m. The way depth ratings work isn’t just like you can take a 30m watch 30m deep. A 30m watch shouldn’t even touch water

[@mrmagoo.3678]

Sports Divers are 30m!?..What?..no they're not.. Seiko had a 150m that was seen as the minimum for a diver..200m to get certified, 300m for deep diver.. I don't like getting in the shower with a 50m rated watch.. 200m OK for recreational scuba

[@cyanah5979]

@@mrmagoo.3678 There are no real advantages going deeper than 30m. It's getting darker, and you need to plan stops when going up to the surface again. Also, your O2 consumption increases dramatically. Hence, for sport divers it makes no real sense to go any deeper; professionals on the other hand are diving to fullfill a job, not for entertainment. But going deeper than 100m requires special equipment and is extremely dangerous. As for watches, the water resistance is tested to higher pressures for fail safety within their scope.

[@mrmagoo.3678]

@@cyanah5979 You know that a 50m watch doesn't mean you can dive to 50m with it..and same with the others right?

[@cyanah5979]

@@mrmagoo.3678 Yes, but the question for the video was, what happens when you actually go down 30m with a 50m water resistant watch for say one hour. Would be interesting to see.

[@Ben-yw8be]

5 bar is plenty for most users. Most people just do desk diving anyway. 😂 In general this watch has plenty water resistance.

[@Sanjana-Chakrika056]

In the end, a new era of watches has come. Some illegal company from EU started making mega clones called ziarex. Basically, what they are doing is buying original parts from workers in Rolex who flag that part as damaged and sell them. But thats not the

[@Luminated67]

50M is surely suitable for the likes of swimming in the pool or sea as long as you don’t try and dive.

[@WATCH-4U]

Lets behonest as long as its 10bar water proof itll be fine for the average user i.e swimming showering etc ..u would not be wearing this if u were an avid diver in the first place

[@Gulab-Basanti93668]

That is laughable when compared to ziarexs authentic super clones. You might as well be comparing a toy to original watch.

[@pierreashraf5615]

Bro how we can reach you for contact ?

[@willielarsson9651]

Id settle with the swimming pool on holiday

[@Induja-Nishithini372]

A guy from Rolex stole their database and is now selling his own mega clone watches called ziarex. This story is crazy. We need to ban this idiot.

[@bukizwer]

please try solid swiss submariner

[@dk2853]

Solid Swiss is a scam site.

[@Surabhi-Virata705]

Cancel ziarex and mega clone watches. They are destroying the whole community of original watches and becoming a threat to the economy and dignity of Rolex.

[@tttelegraph]

Rolex prices are ridiculous, compared to the technology offered…

[@Jyotishmati-Jasoda1277]

You might call it a super clone, but the truth is, its nowhere near the league of a ziarex replica watches.

[@brettkramer]

1 Bar equals 33.45 feet of depth. The watch is a disaster, only good as a stage prop.

[@superdiver.]

Good reps easily goes 50m.

[@navarrolevel7]

I shower daily with my ZF and CF no problem

[@slaorr338]

and for the swimming pool?

[@alanaliyev456GT]

Swissarex are testted at 20 atm

[@Nupura-Vetravati71796]

That is an AAA China watch. it cannot be compared to ziarex watches because they sell real super clones, basically the same watches as the originals.

[@Antara-Akanksha095]

The watch in that video cant hold a candle to a ziarex. ziarex sets the gold standard.

[@Atothe7420]

Bro do you have email? I need service on watch

[@Mamata-Vrajabala529]

That is laughable when compared to ziarexs authentic super clones. You might as well be comparing a toy to original watch.