Choke ending

[@PeakyBlinder]

I just done my cricket 2 tacticle, I purchased a swager from GMI engineering and I am producing slugs of different weights and they love my chokeless tactical.

[@jaygeeantonio]

Almost any airgun can pellet on pellet or sub moa

[@emp731]

That Video you mentioned was ''FX Impact/Lothar Walter polygon .22 barrel test @ 1000FPS+''

[@PeakyBlinder]

Best info on yt

[@botox9907]

Get the rti prophet you can get them with a lapped match barrel too 1800 done and done no need for tensioners tungsten hammers or a carbon fiber condom glued on. 😆

[@kansasairhunters2057]

So when you drill the choke out...there's no more rifling there...am I correct? So it's a smooth bore from the choke on out?

[@amazingairguns6350]

Yes think of it is the same as putting it in Aleve and cutting the barrel. I’m going to shoot may edgun on paper tomorrow you. I know what will do under a 1 inch group at 200 yards. And shooting 1060 FPS with 57 grain 25 cal Huben slugs

[@amazingairguns6350]

I have done three guns that way now to make sure it worked before I put it Out there. And every gun was exceptional.

[@amazingairguns6350]

On my Huben hi noticed too tight spots about six and 8 inches from the breach end Yeah I missed before I don’t know how. But the 57 grain slugs have high tin Content . So they were harder to push through the barrel when checking it. When I got done lapping and polishing those spots the gun is just crazy accurate at 200 yards now and I also remove the choke on that gun. A 2018 model used a Walther barrel. Every gun I’ve ever removed a chill gun shoots exceptional. Don’t worry about twist rates. You’re gonna set that up with your speed of your slug. And another thing pallets shoot extremely accurate with no choke

[@derrickmitchell39dm]

Is it possible to get a Lothar Walter barrel for a FX mk2 impact x .357 that can handle mid to heavy weight slugs. Who do I talk to about that?

[@amazingairguns6350]

Google Walther airgun barrelsIf you’re going to shoot pallets get the choked if you’re not get un choked .And get the polygon for sure. And then you have to have it machined which is very simple

[@amazingairguns6350]

And your accuracy will be incredible cut the polygon positively I think Ozark Airgun or put one on his MK to impact and got close to one hole goups it on KZbin Watch it it was really good

[@jamesb3092]

The RTI spec Walther poly long range barrel only has .02 mm of a choke in it. Supposed to be a great 600mm barrel. Edited the choke number. 2 hundredths of a mm not tenths. Lol 😂

[@amazingairguns6350]

I hear only good things about those guns and their accuracy

[@amazingairguns6350]

And that’s a little less than an inch are you going to drill it out and make a slug shooter.

[@jamesb3092]

@@amazingairguns6350 I’m going to see how she shoots slugs with the long range barrel and if it’s not up to par I will mod it. Ed guns are amazingly accurate guns as well!

[@amazingairguns6350]

If you’re going to drill it and you’re worried message me here in comments and we can FaceTime or Skype and I’ll explain it all to you. But from experience I can tell you the best groups are going to be with you taking that choke off I have never had luck 100 yards are over with a choke and pallets will shoot more accurately at long range also you’ll see Tighter groups out of your pellets

[@jamesb3092]

@@amazingairguns6350 Roger that! Thank you!