Choosing Motors for FPV

[@Draugervan]

And there is one more important parameter in motors that was not mentioned - it's a mounting holes pattern and it's dimensions. Two same stator size motors can have mounting holes with different sizes placed on different distances, so one motor will fit to your frame and another will not.

[@Tjorvi31]

Yeah i just learned that the hard way 😅

[@Ahmed47199]

It would be nice to have a chart with the prop size, motor power range and battery size that can be used (I'm a complete green horn. I'm yet to purchase and build my own drone)

[@-sickfast434]

20 years ago racing rc cars we kept track of wire wraps which could be a thicker gage and fewer turns made a faster more torquey motor like a greedy 11 turn was badass or like a "stock" class 27 turn motor batteries lasted 5 or 6 minutes I am trying to learn the ins and outs of fpv .thanks for all the great vids you guys and j.b are all I watch

[@-sickfast434]

We even had go fast juice for the brushes that gave you a lap or two of sick power

[@Jack_Hurst_]

I pray nick stays on this new grind hits the gym with frequency and live this new healthy life

[@losslessification]

Thanks for doing this long form content, it assembles a lot of info in one place really nicely :)

[@Pile_of_carbon]

This had some pretty good info. I've been in the hobby for two years and I'm still trying to figure out the details of matching motors and props.

[@Shauny_D]

Yah I agree. Logically more blades and a heavier prop would benifit from a slighty larger motor. Like a cinewhoop with 1408 4000kv with triblades, but if you wanted 5 or 6 blades it would make sense to bump upto a 1507 3800kv. I think...

[@energydrinkdose7585]

@Elon Manuel nope, no one cares

[@neilfpv]

Hi, based from your experiences, which motor was the most durable?

[@fabioalmeida4700]

Calm and very good explanation, nice work.

[@vesselfpv8274]

What would be the difference in a low kV motor paired with a high pitch prop versus a high kV motor with a low pitch prop

[@Rapsaj]

Bret Huisjen others can correct me if i am mistaken but from my experience, if your were to pair a low Kv motor with high Pitched prop, I have found the experience lacking as they tended to bog down didn’t have that snappy, quick response I prefer at low throttle. At high throttle tho the prop allowed the quad to gain a higher top speed. A high kV motor with a low pitched prop would give a better instantaneous response but would top out and not be able to reach as high of a top speed when at full throttle. (Note: if you were to pair a low kV 1650-1800kv motor with a 6 cell battery the performance would be similar to a 2300-2500kv motor with a 4 cell. [most people switch to 6s because it allows them to have a longer flight time with a 1050mah 6cell vs a 4 cell 1300mah. The watt hours are more with the 6 cell LiPo]) (1050mah/1000) x (6cells x4.2 volts per cell) = 26.46Watt hours 1.05Ah x (6x4.2V) = 26.46Wh (1300mah/1000)x (4cellsx4.2volts per cell) = 21.84Watt hours 1.3Ah x (4x4.2V) = 21.84Wh

[@dash8465]

Depends on what areas of difference you're noticing.. At slow(er) speeds or hover, a higher pitch prop will tend to cavitat more, be less responsive to throttling, generally produce less static thrust at a given rpm, and works your fc and esc's harder, and may take a good tune, or will make tuning more finicky.. but at higher forward speeds it comes into its element as it "hooks up", becomes more efficient, and produces higher speeds (along with less rpm and vibrations vs higher kv/low pitch). So if you want to take off and cruise around faster a lower kv high pitch combination might be the right pick. A higher kv lower pitch combo will deliver better low speed handling via wider throttle resolution that also allows the fc more fidelity because the props are turning faster, producing more predictable static thrust and not cavitating as much. It'll be nimble and predictable around a playground of obstacles, without being too sensitive, but it may produce boring punchouts... I generally stay somewhere in the middle.. like 24-2500kv on 5046 props for heavy freestyle bricks, or 5050/5052's on a lightweight build.. The brand and style of prop will also make a huge difference.. some are amp hungry, others not so much, its all trade-offs.

[@adeyinkabrasil4426]

The most critical point not mentioned in this video (as is mostly the case with this bogus channel) is HEAT. Yes, all motors eventually die, but the wrong prop size, generating too much heat, will accelerate how quickly the motor dies. You should be able to hold your fingers on the bell, after a relatively long flight, without your fingers being singed.

[@divingfalconfpv4602]

I'm going for straight efficiency so I'm usually choosing a motor size smaller than everyone recommends and lower kV. Right now trying to find most efficient 6" motor. Tossed between t-motor 2203.5 1500kV or 2303.5 1750kV.. Which would give the longest flight time?

[@ls4life544]

Here is a question, how the Amp on an ESC or AIO FC impact motor selection. Some AIO FC are either 20Amp rared or 35Amp rate. Which or how is a motor affected.

[@divingfalconfpv4602]

U r best to choose motors and props first and see what Amps they require. Then choose a ESC / AIO that can handle those Amps.

[@madcowdk]

Thank you! Great info for beginners.

[@pranayarora4641]

What size motor should I use for a 3.5 inch geprc cinelog 35 v2? And what’s the best motor available for this?

[@divingfalconfpv4602]

I might do 3.5". Thinking xing2 1404 4600kV .. have real good power.

[@AFatalPapercut]

Choosin motors wit Jaboi

[@Filagram]

Which motor and prop would you recommend for 5inch for long flight time while crusing but also for some freestyle as a beginner? Id like to get aroung 8-10 minutes flight time when cruising.

[@alphapapa77]

What is the battery count you want to use and the weight of your craft? There is more to it than motor and prop but also voltage source and the mAh rating. This guy claims 8 minutes - kzbin.info/www/bejne/g5zPZ56VYpyka6c

[@Smarthomeyourself]

​@@alphapapa77 I'm at the same question too. I've got 700g startweight with 4s 1500mAh. atm I have a 2500kv Motor with 5" Lumenier Butter Cutter. But flighttime is maximum at 4 minutes. :( My telemetry warning (under 13.6V) starts after 1 Minute. But after landing, my battery is 15V or more.

[@alphapapa77]

@@Smarthomeyourself Not sure what my all up weight is but I get about the same flight time with my 4S 1300mAh on my 2300kv - it is older X style frame and I forget who even made the motors. I get over 6 minutes when I cruise with my 2200mAh 3S batteries. The video I linked to are running 6S 1300mAh 1600kv and got 8 minute 'cruise' flight. I'm building a Marmotte now with an eventual target of flying 6S - the thing with 6S is there is less sag and the motors, I've read and watched, are more responsive

[@dash8465]

The first key to longer flight times is prop selection.. if you're getting 4 minutes on a 5046 drop down to a 5043, for example. It may seem you need more throttle stick to hover, and it wont punch-out as rapidly, but it also wont be sucking as many amps overall and that increases flight duration. A lower pitch prop will also feel a little less twitchy or "touchy", more managable in general (better for new pilot). fwiw..I started flying 5" quads on 2200 3s packs, 2450kv and Gemfan 5052 props.. that was plenty of managable punch/fun while learning basic flight and transitioning from Angle mode to Acro mode, plus the flight times were well into the 7 or 8 minute range. Even today, once in awhile I'll throw a 3s on and cruise around, usually when someone new and interested wants to see the neighborhood or local area thru spare goggles without making them dizzy or sick.. lol.

[@divingfalconfpv4602]

8 to 10mins is easy.. my 5" long range does 40mins (I have video) I still can freestyle it a lil. Just did over 10mins with hero9 but felt the weight lol. U could build a freestyle drone then if u want to cruise longer put on a bigger battery. A lil smaller motor and lower pitch prop will up flight times

[@johnharris2683]

This is almost word-for-word your battery 🔋 tutorial lol 😂

[@gregvittore5004]

Check your motor base plate measurements !! Different brands have different base measurements, for example a stingy v2 frame can not be fitted with ethix silk motors, be aware of that too! Now my frame needs to be adapted 😒😅 happy flying

[@gregvittore5004]

@@smooth_ops2942 i don't know, never had a stingy frame before, I suppose it will be the same.

[@twig_e9425]

I'm just a beginner. I bought some 2450kv motor and it didn't last that long on the air(around 3 minutes). Trying to get used to flying it, the flight time isn't helping. People say that if I use a 5s or even a 6s motor , it would help increase the flight time. Is it true? I'm just cruising around though, no crazy trick yet.

[@alexdunda]

Not for 2450KV. Each cell you add to a battery, you add voltage. This means you have to adjust the KV of your motor. You have to get somewhere around 1800-1900KV for 5s or 6s. It also depends on the prop your running. 5 inch with 1800 KV and 6s is very efficient. But also decreasing the weight of your quad is important too. Hope this helps. JUST DO NOT RUN 6S ON THAT MOTOR!!!! Also check if your ESC/FC can run high voltage. If you don't do research first it will blow up and you will not be happy...Trust me.

[@twig_e9425]

@@alexdunda Thanks dude, well I've flown my miniquad a couple of times now, I forgot to mention that I use a 4s battery. I'd seen some video on KZbin about people trying 4s on their 6s setup. They mentioned that it wouldn't have the speed but the flight time is excellent so I thought that is what I need, a 5/6s setup and then use my 4s battery. Well I'm no expert so I'd like to here your thoughts.

[@alexdunda]

Dellox Ford I guess you could set a throttle limit but your motors, FC, and ESC all have to support 6S

[@gtaitbiz7787]

Which motors that are reliable for a larger FPV?

[@Sircleanfpv]

Would be nice if there is an app which say what motors to use

[@architectinth]

Thanks for the info!

[@paulwunschel9612]

I would like to know the difference between a shorter, larger diameter motor versus a taller ,smaller diameter motor of the same kv.

[@frshagen]

kzbin.info/www/bejne/iHmlc2l_eNKWgpY one of the more helpful videos based on stats not opinion

[@timmytson1]

well explained

[@pfabiszewski]

As far as I know kv is rated for motor without any resistance like props etc. so it’s theoreticallish value. Right?

[@dash8465]

Correct, sort of. Calculating kv on paper is theoretical and varies a lot depending on many real-world factors; wire quality/thickness, magnet strength and the bells ability to confine the magnetic field, stator diameter/height/arm length/number of poles, and the number of wire turns around each stator pole - more turns equals less kv, but also more copper, a stronger magnetic field, and more torque at a given voltage, and generally an efficiency advantage. (which is how 6s comes into play). The actual kv of a built motor is not theory, it can be tested and duplicated consistently using the exact same wire, turns, stators, and magnents, many esc's can tell you exactly what rpm its turning. A motor's kv will also change a bit as the magnets weaken over time or excess heat. Long story short.. Kv is the rpm per volt the motor will *try* to hit regardless of load... the load slows the motor causing it to draw more amps as it strives to reach its target rpm per volt... more amps = heat... so picking the right combination of voltage applied(4s, 5s, or 6s), native motor Kv, and prop diameter/pitch is paramount in extracting the most power out of a train of parts without over-amping any of them.

[@pfabiszewski]

@@dash8465 thanks for clarifying

[@frshagen]

@@dash8465 needed this.

[@gunngin3586]

Im trying to decide on a motor for 4 inch tri-props. Prolly a pitch between 40 and 45 degrees. Im thinking something like 3200 or 3600 kv max and a size of 1407, 1606 or anything in between. The build will be 4s freestyle. Im interested in emax rs1606 and the 3bhobby 1408. Do you think there are any better motors? I am looking for a motor less than or equal to 15usd each.

[@Charlie_Waffles]

today i should get my first set of hypetrain motors in the mail xD .. i chose your vortex branded ones 😅 and some aikon 35A ESCs ..

[@gmivisualsjason3729]

Brilliant video

[@Yoyo-ug7wt]

Great video for a beginner!

[@CrystalliteKK]

Which motor as per your experience is a overall leader in all terms?

[@diacodrone]

Hi can I mix motor same number but different brand Thanks

[@neilfpv]

I started with Emax Eco motors. Glad I did. Can you please write down some brands and models(specifically 2207 1750kv) for us which you think are the most durable ones? I've upgraded to BrotherHobby Returner R6 2207 1750kv for almost 2 months now and I love it. However, it looks likes 2 of the bearings are starting to go bad due to many crashes I've encountered. I can feel and hear some grindings but still flies smoothly.Thank you!

[@skygroover6692]

What would u recommend for a 10 inch build lr

[@TheEviling]

Any tips on figuring out the lifting power of a motor?

[@boratsagdiyev1586]

yes with a digital scale, just mount the motor above the scale blasting air on it. Thats how you measure thrust in grams.

[@TheEviling]

Although that method is easy and accurate to use, it does require me to buy one of each motor to test it.

[@TheMono25]

I have a set of skyrc kv 950 that I got a few years ago for my DJI phantom 3 adv but never used them will thay work on fpv freestyle and cinematic drones or are thay no good

[@stattack5855]

so it means that if i have more kv the drone is gonna be faster? sorry i'm new

[@missme9247]

So what motor is for 234567”? What motors are for what mounts? What size is typicufor what inch quad? Rotor riot dips the ball again

[@teddybear_lost]

Great series!

[@FAQUERETERMAX]

Are emax eco good? Im trying to build my first quad, and I wanna build a 6s 5inch

[@zhongningli4544]

umm emax eco are okay for your first one, but since you are running 6s, make sure you get a good quality ESC because 6s puts more stress on the esc than 4s (although less amps)

[@FAQUERETERMAX]

@@zhongningli4544 thanks for the help! I'll make sure to put some good esc

[@suhailmall98]

@@FAQUERETERMAX there's a channel called Magic FPV, and he tested some Emax Eco motors (can't remember the specs or the drone setup sorry) to the Mr Steele ones. Definitely recommend watching it

[@bbab9051]

can I use same size but slightly different kv in a same build please one of my drone lost a motor and I can not find the exact same motor I found a motor with same size but the kv is 3800 but my drone motors kv is 4000 thanks

[@isaaclanier1507]

No that would cause a lot of imbalance

[@BigAlFPV17]

Great tutorial Jeff!!

[@sgt_yafnei7230]

I just wonna know wich KV with 4s and 5" prop

[@scottgroves974]

What is the purpose of each of the 3 wires it comes off the motor ?

[@andrewdoesyt7787]

I was looking at the Five33 Headsup motor, and it seems to have the most thrust, the lightest, and the cheapest... it seems to good to be true, but no ones using it 😂

[@renderuthis]

"... just to give you a general idea" My wish is we could replace the commercialized nolongerfree KZbin with some charts and diagrams. Everything else is common scene, "consider the price", Oh I never thought of that.

[@calpardo]

Isn't it the music in Liftoff?

[@smokey6455]

So for racing and stunts what is the best KV?

[@huckaberryfpv4986]

Education witcha boi:)

[@icontrol9971]

Who else caught the xxxtentacion instrumental in the background ?

[@kaptkrunchfpv]

So the answer as with most things is. spend money til you figure it out.

[@ThePioneerChannel]

Lol I wanted to build a fast drone with 2750kv motors but then went in the drone racing league website and their motors are 1250kv so got confused to why.. sill don't know lol

[@titowaps555]

More kV is more slow

[@Graybear78]

If someone would develop a system , like the fuel motors had, it would be a great benefit to everyone concerned. Just adding wattage would be a great help, but it is still a guessing game. How about all developers get together and create a system so one can choose a motor to match his needs without guessing. Promoters, such as Rotor Riot and others, could use their influence to cause builders to set up a system that would be helpful to all.

[@patrickfrensdorff7485]

if a motor is cheap doesnt mean it has less better matirials. most of times u pay for the brand thats on it.

[@mrmoosetoyou]

At 4:40 into the video it looks like you got shrunk lol I thought i was seeing things lol ✊😷🇨🇦 very informative for a noob like myself so thanks.

[@sirBumpyCase]

music too loud

[@Glimpse_ofg]

Brother can you gift me some brush less kv motors please for my project🙃

[@mysticfakir2029]

A lot of vague and innacurate information in this video, and that's coming from me, a complete drone beginner. Surprised torque wasn't discussed, and surprised efficiency was described as a motors weight to power ratio. Wouldn't efficiency be when given 1volt input, the rpm is equal-to or less-than the kV rating of the motor?

[@isaaclanier1507]

No he did touch in efficiency and that’s not how it works. If you’re a complete drone beginner you shouldn’t come on like you know better then.

[@mysticfakir2029]

@@isaaclanier1507 I might be a beginner to drones, but I am an engineer. Motor efficiency is defined as output power divided by input power. Just because an electric motor is used in drones as opposed to any other application, doesn't all of a sudden change the definition of efficiency.

[@isaaclanier1507]

Simon O'Toole That’s the problem, you’re coming at this from an engineering perspective, you need to come at this from a drone perspective. It’s defined as power to weight because if you have a motor that can more easily carry the weight of your rig, which would be higher kv, then for your drone it is inherently more efficient. He’s not referring to the individual motor efficiency, in that case you are correct, but rather the motor efficiency in comparison to the total weight of the drone.

[@mysticfakir2029]

@@isaaclanier1507 But that isn't efficiency, that is output. Output is the net force (or power) that a system produces. That isn't efficiency at all, doesn't matter how you look at it. He is using the word incorrectly. To say I shouldn't be looking at it from an engineering perspective is odd. Drones are an engineered innovation.

[@isaaclanier1507]

Simon O'Toole If what you’re stating is true, then we would naturally want to most efficient motors which by your definition is the highest kv. By your words we would want say a 4,000kv motor on every size drone, but we don’t. We vary by thousands of kv because that’s not how we view motor efficiency when it comes to drones.

[@asdf52708]

no shit, you don't work at excel anymore?

[@prohabetamu]

100% u showed ur face. Why don’t show the motors, and components, like a slideshow

[@nemesisfpv440]

So.... Im a vet in fpv.... But.... Even tho im subbed with notifications i dont get these vids in my subscriptions..... Why?. I just watch all the content?

[@ptomeo]

I think it’s because it was part of a series so I think the don’t get the same treatment as one off videos. I also didn’t notice these videos were released except for a random search...

[@m.s.aviation7065]

@Nemesis FPV did you hit all notifications or occasionally?

[@keithschrader1426]

The music background is annoying

[@robertbrander2074]

LOL ! ...... Not much Help , but a lot of "I don't Know ... You'll have to figure it out by yourself !" ..... What a Waste of Time ! .....

[@frshagen]

I was wondering if I was the only one... Nothing about amp draw. The video should be called, “the difference between cheap and expensive motors, maybe.” 🤣 “This is a video to help you choose the right motor..” then at @3:40 “it’s gonna take time, and you have to figure out for yourself what’s gonna work”

[@brandonwoodford579]

if they dont pass QC They just get sent to banggood, then they sell it to you.

[@CheffHD]

this guy is such a waffler

[@JohnSmith-xl9bo]

absolutely terrible!

[@reb363]

I am sick of trying to watch a video and have to put up with music in the back ground, makes me want to scream. So I just stopped watching

[@ThomasP525]

Bye felicia