Choosing the right Zenoah G320 Engine Davesmotors com

[@dvu0704]

Video worth more than 1 million word. Awesome video, thanks for sharing this video Steve.

[@Ultra2040]

Can not wait till this hits the UK!!

[@DDMSteveB]

You guys over the pond will love it! Plenty of power and a very reasonable price. These are up on Davesmotors.com ready to order now!

[@cbeck611]

i saw on zenoahs website they have the new 32cc for marine applications too

[@DDMSteveB]

+cbeck611 Yes, there is a 320PUM as well. The first batch they had problems with con rod bearings. They have been fixed and will be shipping the new version in the next few months.

[@benjaminoheb2372]

Can you post a video of how to replace the piston ring on the G320RC please. I need to replace the piston ring on my goped and would really appreciate a tutorial.

[@RICHIE_RICH89]

I have been running 110 octane since the day it was born not a hickup yet alot of people dont know zenoah recomends 98 octane min in the g320 tried 93 when i ran out of race gas it sucked compared to 110 .

[@dennisyoung4631]

Thanks. Does the 110 keep well?

[@Monstermanhbf]

Good stuff SteveB

[@DaveStarr4]

Hi I have some questions regarding your Zenoah G231 PUM marine engine 1- can it be made into a electric start instead of a pull start? 2- what type of transmitter and receiver equipment would I need for it? 3- are there any other parts for it such as propeller shafts,propellers,mounting hardware etc? 4- what is the max weight it can push without burning up?

[@DDMSteveB]

+DaveStarr4 I don't have any first hand experience on the marine engines; just the air cooled RC versions. I assume it can probably have an electric starter affixed to it. When it comes to gas boats we usually send people to funrcboats.com

[@kenny02085529]

Hi SteveB, a quick question here. Can I use a G320 from Losi 5IVE to HPI Baja 5B directly? Thanks!

[@bunasir394]

Hi I liked video I have simple question so the bb125c you saying that fit direct in any Baja 5b no need anything extra is that right because soon if I want to buy for just baja 5b truck I appreciate you I will waiting for your answer thanks again and keep up

[@DDMSteveB]

The BB125C is what you need for the Baja 5B. The small aluminum spacer that sits underneath the 5B clutch housing needs to be shaved down about 2mm. This piece: www.ddmracing.com/hpi-102164-spacer-set-for-fuelie-engine-gunmetal

[@bunasir394]

@@DDMSteveB thanks for reply so that means I need only spacer if I need for Baja 5b anyway thanks again soon I will see on your website

[@kennyono4389]

Are all these motors appropriate for a goped application or is there something specific I should grab?

[@mdwan7250]

ok so rampage mt should use the modified clutch type.cannot use the standard housing.ok thks

[@wades5thscaleforlife872]

Do you still have to shave down the clutch house to fit a baja thanks

[@techstry9057]

Which one do U have to buy for the losi 5ive Buggy? Please drop a link

[@brianwallace4842]

Mtxl direct fit on ngine?

[@neilpro18]

Thankyou sir i will be buying from you

[@GuiltySpark710]

New to gopeds and motors. I have a bigfoot goped and I'm thinking of motor swapping the stock L23gh to zenoah 290. My question is if I get it with a clutch would I have to get anything else?

[@DDMSteveB]

Hey there! Thanks for stopping by to comment. I am admittedly not as good at GoPed stuff as I am with RC's. If you email Brad over here by sending an email to [e-mail] he can get you set up with a good engine suggestion for your BF.

[@jasperbengston9547]

I’m tryna. Get one for a Goped

[@love_4_rc180]

Hi Do you still sell the Bartolone clutch housing or the Vertigo one, for the Zenoah G340 ? On a Losi 5ive t. Please let me know. Not sure what one to select on your website.

[@DDMSteveB]

Yes we do! We are out of stock on the 320 Bartolone housings right now but when we have them they are here: www.davesmotors.com/Bartolone-Racing-Billet-Losi-5ive-DBXL-Clutch-Housing-for-Zenoah-G320RC.html the Vertigo housing is here: www.davesmotors.com/Vertigo-91652S-Vertigo-Vented-Universal-Clutch-Housing.html

[@love_4_rc180]

DDMSteveB Thanks Soo much Steve =) For the great information, and for the part number. ⛽

[@yugorc9386]

iam thinking about getting That motor for my RCMK XCR 1200 which one would you recommend?

[@DDMSteveB]

Worth it! The G320 is the best value for sure!

[@bryanjames03]

Is there a video on how to tune this engine and I was wandering when you get the losi dbxl does it come with a exhaust pipe that is tuned already that you can put with this motor.?

[@DDMSteveB]

+Bryan James Hi Bryan - I have not done a tuning video, but really the principles are the same for this engine as the stock engine. You will want to use 25:1 in your fuel/oil mixture. If you have a tuned pipe it will be a different adjustment from the stock settings and stock muffler.

[@motododo4626]

Helo I went to the site and it shows the redcat and losi 5t using the same engine. I have a redcat chimera Sr would this engine work for it? And if so what option do I select

[@DDMSteveB]

Yes. Select the short clutch option. You need to use the redcat engine cover and clutch plate/clutch plate bolt OR use the CY parts listed in the description of the engine.

[@motododo4626]

@@DDMSteveB alright I see standard hpi baja and kraken and the other is modified losi redcat.

[@DDMSteveB]

@@motododo4626 The modified version is the short version. That is what you want.

[@motododo4626]

@@DDMSteveB alright thank you I was told to buy the standard model

[@lo3iw]

do you actually need to change the fan cover for the dbxl? it doesn't mount using the fan cover like the 5ive

[@DDMSteveB]

Yes, the DBXL and 5IVE will both need to use a CY fan cover (DDM part# eg411, or use the stock one from the original 23cc engine)

[@lo3iw]

DDMSteveB excuse my ignorance, but i'm not sure why? the dbxl doesn't use those holes you mention in the video for engine mounting.

[@RICHIE_RICH89]

Can you show a ported g320 head in depth for guys that want to try porting

[@DDMSteveB]

typically no, as that is the intellectual property of the engine builder. These are two stroke engines that are just on a smaller scale, so the theories behind port timing etc of other two stroke engines still applies to these smaller engines. A little research will go a long way.

[@RICHIE_RICH89]

DDMSteveB i know for the most part 2 strokes are all the same iv been fixing 2 strokes for yrs on bikes and sleds and am 1 of the best around . I asked because the deck is closed porting and want to see one and others mite like to too . Save the stupid research comment for someone else. Your reputation for having a mouth must be true. Easy to do behind a keyboard or desk.

[@audis4ni99a]

if i have a King motor X2 roller, do i still need the CY fan cover?

[@DDMSteveB]

Is that the clone of the Losi? It depends on if the clone company followed the CY bolt holes or if they made something weird for Zenoah bolt holes. You could probably use the fan cover from your stock engine onto the Zenoah though.

[@audis4ni99a]

i got no motor at the moment lol, i bought it as a roller, and yes its a clone... very popular clone, its a king motor or rovan (what ever you feel like that day lol) the stock motor is a fuelie 34cc... so does that help?

[@evildoctorchan1]

What kind of hp does this motor put out? Thanks

[@DDMSteveB]

evildoctorchan1 Late to reply to this; but Zenoah states this engine is a 20% increase in power over the G290RC, which was rated at 3.5HP. With a tuned pipe this engine is a very excellent engine and has a ton of power.

[@endangereddangerous8102]

Which one fits the FID dragon hammer

[@DDMSteveB]

Fairly certain the Baja/Kraken version is what you will need. The stock engine in the FID is the Zenoah G290, right?

[@fpalenciafp]

I want this engine for a go quad what would I need

[@DDMSteveB]

You will need to use the clutch drive on your go-quad, part gt201. Your seat will need to be trimmed a little because the engine moves over and would hit the seat back. It is not too bad though, we have one here at DDM that we have done that to. We use the extra long spindles too with dually wheels.

[@fishnfreak18]

@@DDMSteveB How good is the torque down low? I’m thinking of using one of these for my next project. The first project I used a 460 on it and it’s awesome but I like the reliability of this engine in the video and it’s a small bore so it would get better gas mileage.

[@DDMSteveB]

@@fishnfreak18 Compared to a 460 it will not have the same kind of grunt. That is just the science of displacement at that point. Of course gearing and things can help give back a bunch of torque and low end power, but you will lose out on peak speed.

[@fishnfreak18]

@@DDMSteveB Thank you so much for getting back with me so quick. I will be placing my order with you guys soon. Great company love everything that you guys do.

[@MrBRC]

what is the HP rating on the g320?

[@DDMSteveB]

Funny thing is Zenoah rates them at 3.5HP and says they have 20% more power than the G290RC; which Zenoah also rates as having 3.5HP. They definitely have a lot more zip than the 29cc engine.

[@mzondi1970]

saving my pennies for this for my hpi

[@neilpro18]

Hey my friend do you sell modified 5ts meaning 5t with better motor turtle racing's stuff you know a hooked up model let me know i already got a vector from you thanks neilpro18

[@DDMSteveB]

Hello Neil! We do not have any full option cars that are modified in house. We sell the complete cars and the aftermarket pieces. We leave the building and assembly up to the customer :)

[@undercoverman9367]

And this is a full mod: Hpi Baja 5b G320 full mod, 19/55 wheely: kzbin.info/www/bejne/ap6VhKt6ic15g9U

[@marceloconstrutorhelicopte791]

Preciso de um desses !