Zenoah G320 & G290 Unboxing - High Quality Japanese 1/5 Scale GAS Engines - The Best For HPI & LOSI

[@Imperial_Wing]

What’s up Nitrogang! This engine is great man let’s see it ripping

[@hybrid32494]

hey my dude! thanks for watching! In the next couple vids I will be sticking this G290 in the baja, then we will have some fun. Im looking at the engine as I'm typing this comment, can you feel the ZENOAH?? a ahah, JK.. TTYL.

[@adamgray4110]

Keeping 5B alive , love the video

[@hybrid32494]

hey my dude! thanks for watching! In the next couple vids I will be sticking this G290 in the baja, then we will have some fun. Im looking at the engine as I'm typing this comment, can you feel the ZENOAH?? a ahah,

[@brotherskrillrc6042]

Awesome! Just received a zenoah G320RC motor from Dave's motors rc for my rampage , I bought a rampage used and in good condition but original 32cc fulie engine was bad , your video inspired me to get a Zenoah for the redcat. Hope to have installed tonight! Then break in procedure

[@Livlifetaistdeth]

Respect! That is awesome! I can't wait to see those running!

[@benjaminmartinez7982]

Awesome bro, I can't wait to see more content on this original HPI Baja running with a fresh Zenoah Motor. Congrats!!!!👍

[@hybrid32494]

hey my dude! thanks for watching! In the next couple vids I will be sticking this G290 in the baja, then we will have some fun. Im looking at the engine as I'm typing this comment, can you feel the ZENOAH?? a ahah,

[@benjaminmartinez7982]

@@hybrid32494 awesome Brother. I can't wait to link up and run the baja's

[@nitrosocietyrc2787]

Yes sir! Can't wait to see it running!

[@hybrid32494]

hey dude! Guess what, right after this video I decided to try to fix the stripped threads for the exhaust. I drilled out the old threads and just used a thicker screw and problem solved! I have also purchased a new (FAKE) carb, and we will try to get the old Zenoah in this ting running. I hate to throw away an engine I could repair, you know. Major break thought .

[@wolfdenfamilyresell3193]

I’m like you just picked up a 95 civic hatch to be my daily driver to replace my impala, love my impala but I know the civic will last forever. Keep up the good work. Picked up a 5b myself and getting ready to rebuild it. Love my nitro and gas engines.

[@kacperszawarejko7103]

I have one of them and it's performing really good much more power and rpms which give my truck more top speed and way better acceleration

[@balsamicvin9935]

Love the HPI Baja! cant wait to see it run!

[@hybrid32494]

we taking over the world with the 2-stroke baby!!. lol.. Zenoah will make taking over the world easy and reliable btw, ahah.

[@balsamicvin9935]

@@hybrid32494 Ill help u, i got a 5th scale custom build gas RC car.

[@bluegroovemodelsports9650]

Great video and side by side comparison for the gas rc newcomers. Glad to here the G320 going in the redcat Rally Xr

[@hybrid32494]

hey my dude! thanks for watching. Yes, often times people never discuss the basic fundamentals of the GAS engines, in reality they are all highly similar, but Quality is the main differentiating factor. BTW, I've since repaired the Stripped exhaust port and this old engine is repairable, therefore I will try it out before doing the G290 swap.

[@Nerm78]

I absolutely can't wait to see it in your redcat! You definitely need to do some before and after video's!

[@hybrid32494]

whats up bro! Happy Sunday! Yes, the G320 in the Redcat Rally XR will be amazing, also I have very good solid OBJECTIVE facts I've collected for the stock Redcat motor over the time, we will finally know.

[@ivegotgasrcbyvinny3025]

I bought a Zenoah G320 off E-Bay for my Redcat Rally XR someone took out of a 5T, brand new, I got it for $254.. shipped. That was 6 months ago. Now that you're going to put one in your Rally. I wish I had done it sooner I could give you my opinion. But I'll just wait for your opinion and set up so that I can get it right. Can't wait to see both Zenoah's ripping.

[@steve_yerger]

Just ordered a BB211 from DDM for my Rovan 5B Oval Dirt Late Model for spec racing! 2-stroke Baby!

[@hybrid32494]

hey bro!! Awesome! Ye man, DDM is the place to go to for Zenoah, no denying that. I should have put the 5% DDM discount code for people to use, I gotta try to remember it now myself.

[@dylanevans6375]

Stoke to see the redcat getting back in action! I got one because of your first redcat xr video! NitroGang

[@Meyers2strokeRcgarage]

Great video Dmitri on the different engines and different RPMs and everything!!! You’re exactly right red cats suck!!! That G320 is going to make your red cat fly!!! Great watching my brother!!!

[@kgm5512]

I was wondering were the rally rampage had been. Zenoah baby. That’s gonna be sick

[@hybrid32494]

well unfortunately that Redcat Rally I showed in this video had a serious runaway due to a locked up throttle servo and a crash at top speeds right into a curb. Now I need to bend the chassis back and replace some parts, but the drivetrain is fine, anyway, the G320 going into that bad boy.. No crash will keep us down.

[@bangurhead4027]

PREVIET!!!! Spasiba Bellshöy!! How are you you Crazee Nitro duder!! 💯🤜🤛 I'm loving the direction you've taken your channel in. One of the very few channels that has MAD love for the Fifth scale FOSSIL FUEL 🥵 BURNING 🍼 BABIES!!!!! 💯👍 DAGAVARELES?? Keep them coming mein friend, God Bless RC!!! 👍🏁🏁

[@TK_Mo]

That bolt size issue is easily repairable! You've got 2 options.... Thread it for a larger bolt or it can be fixed to take the bolt size your wanting to use. I can't recall what they call the process but Harbor freight likely has what you need. Basically you tap the inner diameter then they make a reduction tread that twists into the thread you tap. The bolt then pressure fits the reduction threads. I have done this on Automotive applications and it works well.

[@hybrid32494]

BRO, you won't believe this. Major development in the STRIPPED SCREW THREAD department on this baja. I just repaired the stripped exhaust port. Basically drilled the old threads out and put a thicker screws in, problem solved. I'm damn happy right now. All this Motor needs is a new carb now. I'm wondering if it's worth restoring before the new G290 swap. what you think>

[@TK_Mo]

@@hybrid32494 alway worth restoring a good quality engine. You'll find an application for it later.

[@gregorydobson4307]

Helicoil re-thread is what we call it in u.k.

[@bradleypendleton202]

Awesome dude. I have a g320 in my rovan baja and it pulls wheelies. It's a great engine

[@philliplyn2692]

Nitro gang thanks for sharing very information blessed love to all knowledge is power hopefully everyone pays attention keep up the good work you got a really good deal on everything 🙏🏿🙏🏿🙏🏿🇯🇲🇯🇲🇯🇲

[@eastsiderc]

Let me add my 2 cents if you notice the 990 stops at 29 cc. 32 and up gets the bigger more power performing 1107 Walbro carburetor. Zen engines are awesome no doubt. Rovan engines are great too! Zen has better quality control. Better bearings and better seals. But for the price you cant a beat a Rovan engine also King Motor 34cc and 30.5. Allen had assisted them both in some Rovan and those king Motor engines and thats one reason they run well is because they listened to his suggestions. However its evident they do not listen to all of his suggestions, hence the poor choices of internals for the 71 cc Rovan shown on my Channel. Any who just wanted to share! Great vid and congratulations on your beautiful new brap hearts ❤️ 🤝🤝🇺🇸🇺🇸🦾🦾

[@eastsiderc]

Also Zenoahs exhaust port timing is 180 degrees this really aids in the wonderful rpms these engines produce.

[@hybrid32494]

hey bro! I always love your comments, I noticed when I was unboxing the G320 they included a carb that wasn't a 990, so yes, you're right. I just edited that part out, because not many would even understand what I'm talking about. They only care about WALBRO. Anyway, yes, the KM 30.5 engines are terrific, I totally agree. These are my first Zenoah motors, I'm super excited to do a good long term test and comparison.

[@bryan70546]

Awesome bro they make the best engines. Another option if the heli-coilz don't work just replace the head on the engine they are fairly inexpensive. Keep up the great work.

[@hybrid32494]

BRO, you won't believe this. Major development in the STRIPPED SCREW THREAD department on this baja. I just repaired the stripped exhaust port. Basically drilled the old threads out and put a thicker screws in, problem solved. I'm damn happy right now. All this Motor needs is a new carb now. I'm wondering if it's worth restoring before the new G290 swap. what you think>

[@nitrogas5719]

@@hybrid32494 I would say go for it, it’s 15 bucks for a 990 off eBay so I would personally try it

[@bryan70546]

@@hybrid32494 go for it buy a good carb thou.

[@chicagorc3967]

hell yeah man thats sick! i just traded my g320 full mod ported esp i had with tuned pipe for the dbxl for some other rc stuff and cash. I wish i knew you were looking for one man i let it go cheap! i included a new 813 carb and bartalone pipe for only 400$. the motor was 550 alone

[@onefastnitro]

Awesome segment good to know there’s resources out there for nitro or gas motors. Can’t wait to see how your new projects come out and perform.

[@TrooperManaic]

You can use fix a thread in there. I did it in one of my motors and it works great.

[@hybrid32494]

you won't believe this. Major development in the STRIPPED SCREW THREAD department on this baja. I just repaired the stripped exhaust port. Basically drilled the old threads out and put a thicker screws in, problem solved. I'm damn happy right now. All this Motor needs is a new carb now. I'm wondering if it's worth restoring before the new G290 swap.

[@TrooperManaic]

@@hybrid32494 take it apart and see if you got deep scratches or worn spots on the cylinder. If not get all new gaskets, seals, and bearings. Get a .005 gasket at ddm and bam. Fresh built engine with more power.

[@jezzeestewart3712]

Yeah the 290s pretty crazy I’m 165 pounds and I put it on my go ped scooter spindle shaft driven and with a proper pipe I’m going at least 32 mph with the weight of the scooter and me those engines are straight crazy it’s a good performance card they give you two let’s see some action I wanna see some jumps man I’ve been doing nitro RC planes lately

[@charlesram9350]

2 speed baby you are the man another GREAT VIDIO ma dude. Awsum DETAIL on the engines. ***** i am a 2 speed baby nitro gang dude 100 !!!

[@hybrid32494]

hey my dude! thanks for watching, I'm already working on the next follow-up video to this. I've figured out how to repair the stripped screws, I'm super happy. Now all I need is a new carb for this BAJA and I'll be able to run the motor it came with.

[@rabbitfootedkitty1339]

You really need to get a goped, man. The G290 is an excellent motor for a Sport. Just look at the most recent video on my channel of swapping my cy290rc motor from my rovan baja 5b onto my sport.

[@hybrid32494]

hey my dude! I've been looking for a goPED for a long time, believe it or not. But they are not cheap, usually about 4-6 hundred for a normal GSR model that needs some work. I'm not sure I want the Sport model. What do you think?

[@rabbitfootedkitty1339]

@@hybrid32494 Gopeds cheap compared to a freaking Primal Raminator, which has a nice exhaust, but the dumb cheap chinese pocket bike engine instead of a more quality engine like a performance 46cc CY GP460, which there are tons of mods for and professional engine porters, mainly supported by the Goped community. Why Primal went to the effort to design a sick exhaust for a shit engine is a damn mystery to me. My point is they are money pits just like rc cars are, so little excuse to avoid them for that reason. ANYWAYS, I got my Goped Sport from a Walmart hobo for $90, I'm serious. It was pretty messed up, though, and still is lol, but I poured some money into it and now it's pretty neat. I do understand why you wouldn't want a Sport because of the 6 inch hard tires, compared to more stable 10 inch normal pneumatic tires, so if that is a large concern for you, I would get an air tire first, and then try out a Sport. From my experience, I've gotten use to hard tires and I feel fine on them :) Do you have a motorcycle/scooter/dirt bike or anything like that that you ride but never talk about? Also this is random, but I believe you're on Instagram and if possible, I would like to chat with you sometime. Thanks, Hybrid

[@derrick6483]

Really interesting video. I like that you went into great detail and actually know your shit. I personally don't know anything about the 1/5 scale game. I am learning tho and who knows maybe I'll dive in one day. As a matter a fact I was recently looking for that orange Rovan that you got a while back but they are sold out right now. I used your link in your video. And I definitly want that particular model with all the aluminum upgrades and shock towers and bulkhead reinforcements and what not. I believe it was the "King Motors" one... It had better tires as well. Nitrogang4Life

[@hybrid32494]

whats up bro! glad you learned something from this video, I try to approach all topics from a beginner point of view and then progress into the serious issues. And yes, the King Motors orange Baja's are sold out unfortunately. The Gas RC life is fun, totally different from nitro, and also have a steep learning curve. Once you get one, you will appreciate the durability, and the craftsmanship on them. Nitrogang!.

[@Joes5thscalercandguns]

Zenoah handed down there wicked when modified

[@hybrid32494]

hey bro!! Yup, you got that right. I totally forgot to mention that stating with a Zenoah engine is the best thing you can do if you're going to modding this. In fact ESC mods the Zenoah motors and sells them already, im sure you know.

[@gsrc6876]

Nice bro..had zenoah back in 2008 love your channel! No bs. Keep it up bro shalom and peace from israel

[@LawrenceTimme]

The Baja is going to fly with that new engine.

[@hybrid32494]

BRO, you won't believe this. Major development in the STRIPPED SCREW THREAD department on this baja. I just repaired the stripped exhaust port. I'm damn happy right now. All this only Motor needs is a new carb now. I'm wondering if it's worth restoring before the new G290 swap. what you think>

[@LawrenceTimme]

@@hybrid32494 yes! Restore that bad boy!

[@Sloppyjoe96]

im excited for the redcat rally with a zenoah in it

[@hybrid32494]

me too bro! The worst part of the Rampage series is their terrible LOW RPM engines, with this Zenoah the chassis will actually be a fun to drive and value;e car, It's going in soon!!. Nitrogang!!.

[@allaspectsrc4178]

1/5 scale baby!!!

[@gsrc6876]

G32 is about 16.000-17.000 rpm get a good pipe for it and it will blast bro! Waiting for a video

[@theadventuresofshellyandfr5618]

Ralphie!! Ralphie Boy! Zenoahs rock! But the CY is $100 cheaper and rips fine!

[@me8u73]

Great purchase mate!!! Best bang for buck is the Zenoah G320RC for sure. I noticed you're still using that crappy pipe on the Baja. Unfortunately you will have to invest in a proper tuned pipe if you want max performance from that engine.

[@hybrid32494]

hey my dude! whats going on! yes, you're 100% right, the ZENoah G320 is top notch stuff! BTW, I've recently got the stock rovan tuned pipe, I'll be using it on the repaired motor. I've figured out a way to repair the threads, I can't believe it, it's actually worked. You will see that soon.

[@mikeymike3240]

Hi there, you should strip down the HY? Engine and re profile the port for more RPM , then she will fly and throw up 🤮 rooster 🐔 tails. Awesome video and a great haul of engine’s. 😎👍👍👍🇬🇧

[@mikeinsi87able]

Zenoah strong baby 💪🏼💪🏼💪🏼 #nitrogang

[@keveshannaidoo5670]

Finally !!!!a new video!

[@Ryan-gf3jf]

Great Vid! I would have just got a new top end for that zenoah which prob comes with a piston and pretty much brand new! But great stuff congrats on the new motor!

[@nitrogas5719]

I didn’t know that the weed eater brand husquarvana made Zenoah engines

[@hybrid32494]

hey bro!! YUP, Husquavarna purchased Zenoah in 2007, I researched the whole thing. I was going to go pretty deep into the company research, but this video was already kind of long.

[@tavvs4102]

@@hybrid32494 they make some of the nicest dirt bikes in my opinion btw hybrid excellent videos as always keep up the good work

[@rcshowoff5427]

Those are some really nice engine's.. Can't wait to see that HPI Baja rip. After break in of course. Ha.

[@hybrid32494]

hey bro! thanks for watching! In the next couple vids I will be sticking this G290 in the baja, then we will have some fun. Im looking at the engine as I'm typing this comment, can you feel the ZENOAH?? a ahah,

[@traxxasslash95]

Hey man, my fiancee is proud to drive her 2nd gen Prius, and she has an Escalade too!

[@bassanonymous4923]

My obr 33.5 has a stripped muffler screw.. I stuck a bigger screw in it. Working good over a year later but I'm going to catch hell with it in the future ☹🤦🏻‍♂️

[@hybrid32494]

hey man! That is one thing I'm considering doing too. The only other problem currently on this old motor is the carb is for sure bad, it's not flowing fuel. No big deal. I might do a repair and see how it goes, but need a new replica carb first.

[@nitrogas5719]

Cool! I just wish the guy I bought my 5t from knew what running an engine lean was and what a break in was, the hone marks are pretty much gone from the cylinder lol

[@Syphic001]

Bro those zenoah’s run for days nice set 👌 You gonna do a video on the dynamite .19 on your buddies T-Maxx or what ? Lol Nitrogang been waiting 👍👌

[@rcnitroflux2361]

Great vid bud zenoah are great engine s bud

[@hybrid32494]

thanks bro! Zenoah is top notch stuff, even that old one ran for a bit at the end of this video, you saw! the carb is bad on it tho, but it ran for a bit.

[@rcnitroflux2361]

@@hybrid32494 I got zenoah g320rc in rovan baja and in 30 dnt Lois clone I got rovan 45 cc bud

[@hybrid32494]

@@rcnitroflux2361 nice!! Zenoah is OS Engine of the Gas world, lol. Top notch stuff. I personally never though I'd get one, because all my stuff is relatively highly budget based. G320 baby!!

[@rcnitroflux2361]

@@hybrid32494 my first hpi Baja had 23cc it only done 25 mph but it was great bud

[@tonymanna9160]

Very interested to see how that Zenoah engine performs compared to the Rovans.

[@hybrid32494]

hey dude, yes! My thought exactly. I will be doing lots of RPM testing and speed testing on this car, we will see what the top RPM on a stock G290 is, that is what really matters. I have bottom line numbers for both HY and CY engines, now I need the facts for the Zenoah in real world conditions.

[@tonymanna9160]

Nice looking forward to seeing what you find out! Spent my day tearing down my Tmaxx 3.3 to clean and replace some damaged old parts.

[@logangrilliotvlogs3538]

Zenoah is literally the os version of gas rc's

[@hybrid32494]

LOl you got a good point there!! OS is King, and Zenoah is King! This makes the nitrogang and GAs Gang very happy!..

[@terrykuehn2686]

Hey Hybrid! Great tutorial on those engines and the different brands alot of info! I seen in the comments that your going to try to put the helicoils in the exhaust bolts to save the engine and have a nice backup that would be a great video! On the new engines are you going to put some screen protections on them and outerwears too? I've used screen and JB Weld works pretty good just wondering? Can't wait to see the new one running in the Baja! OGNG🤔😉😎💪👍

[@2blades_rc650]

And that new intro is awesome. . .have you had that drift car on here before??

[@jasonyama1082]

Anything built in Japan is high quality

[@hybrid32494]

hey dude! YUP!, petty much! Even the furries! ahah. JK. anyway, reality is you're totally right, they stand behind their products with tons of quality and reliability.

[@nitroneal48]

I have a 30.5cc baja 5b, any tips on tuning, like what do I start with the high speed needle or the low speed first,

[@RhiceyHarierar]

Just got one for mygoped

[@hybrid32494]

hey my dude! Awesome!! Yes, these are the best upgrade motor to get in the relatively normal price range, you know.

[@Alex86056]

Nice vid man I didn’t realize official duck studios made that video Hahaha

[@hybrid32494]

ahah, LOL, NO, this video was made by the DX production company in association with Hybrid. ahahah. JK. thanks for watching.

[@jericoflores5747]

Good day bro..just wanna ask,,what walbro carb is alternative for wt 1107 of g320 rc?..thank you in advance

[@hybrid32494]

Hey man!! The most common carb people get is the 990 carb. Its popular because it does not have a choke and it has better internal fuel flow. Look into it, ive used them myself, very good carbs.

[@jericoflores5747]

@@hybrid32494 thank you soo much...,im goin to get 990 carb for my g320 rc,,,

[@jericoflores5747]

How about wt 997 bro?..is it good alternative?

[@jericoflores5747]

Also bro what is the best pull start for g320 because i bought easy pull start but immediately broken....

[@DavePenko]

I recently bought a redcat rampage and the hy30 motor in it is garbage. I ordered a senmubery 32cc motor off amazon for it. Is it a good mototr or a bad one?

[@coway2you317]

Hey bro. Have you ever had any nitro rc from the HSP brand? For the on the road verson and rally version they have 2 speeds baby! It’s cheap but not that reliable 😂

[@hybrid32494]

hey bro! I own an EXCEED Nitro Rally Monster, it's the USA version of the HSP chassis, so yes!. I've had it since 2013 and the 2-speed BABY is terrific, check my channel for videos on it, they will blow you away. Just gotta run it normally and not jump it, it'll be fine.

[@brotherskrillrc6042]

Hello hey great videos big fan! I have question maybe you know about iam new to the 1/5 scale rc I have rampage mt I just installed a new zenoah G320RC from Dave's motors in Utah in it since I bought the rampage used and could not start the original 32cc motor and out of frustration bought the G320RC complete new ready to go,and was wondering I've been breaking in the engine and I have a homemade silencer a small axe can drilled out both ends stuffed some alum foil in it for baffle & ducktape around it to hold it on to truck to be able run it in my neighborhood for noise control it really lowers the cracking sound to half the noise pollution and kinda wondering it might be running a little hot! I havent full throttle it yet alot of idle& just half to 3/4 throttle for 1 to 2 seconds burst and for about 6 to 7 minutes run time up and down my street. So If I spit a little on my finger and touch the chambered part of my exhaust redcat special pipe the spit sizzles so wondering if normal and should I keep running it like this for now until I get out on a course?? Any input would be great , like i said iam not running it super hard running rich and semi loud lol!plus I noticed the cover on the zenoah dosent allow air flow over or thru cylinder head when driving forward the plastic cover that covers head and top of spark plug blocks airflow if u understand? Thank you sorry very long question

[@hybrid32494]

I know the Zenoah fan covers are slightly different from the regular CY/HY fan covers, but they still allow adequate airflow, should not be a problem. I recommend you use a temp gun to get actual temperature readings we could discuss. BTW, which oil are you running? And also which mixture are you running 25:1. I've been doing about 30:1, seems to be ideal.

[@hassanjamal4212]

Can i use this as a generator to charge my ebike on the go?

[@malik-b-khan5964]

What about Rovan 36cc which is buggy asi?

[@BlackMetalRC85]

Hi, the G290 is enough for der Baja.

[@nitrodude3592]

0:27 this looks like some kind of ritual.

[@hybrid32494]

LOL, it's the DRIFT GAS Gang inauguration for a new Gas RC. That will be in a future video, and entire video on that car. The old style redcat rampage rally, not the XR Rally which I own, they are totally diff.

[@Sloppyjoe96]

lol i think it says hobby grade only because they also have the chainsaws and weedwackers engines too

[@gsrc6876]

U said that u visited israel when u were yonger..well..come visit israel again before israel comes to visit you..hihi..your welcome here any time bro tel aviv is beautiful!!!

[@hybrid32494]

hey bro!! YUP, I did the birthright trip back in college, so you already know! Been to all the typical tourist locations, especially Tel Aviv. Great time, I miss it. Then went back a couple years after to do some work over the summer in a camp. I gotta come back and check out the BAJA scheme over in the Homeland!! you know it.

[@nitroneal48]

I can start my rovan baja 5b 30.5cc with 1 or 2 pulls without the choke on,

[@JK-qs9ig]

if only i could find an original baja for cheap.

[@hybrid32494]

hey bro@ thanks for watching! Just check to make sure it's got no serious roadblocks like mine, with the stripped exhaust threads. Not the end of the world, it's fixable, but requires precision tools, luck and skills.

[@JK-qs9ig]

@@hybrid32494 thanks bro ill be looking

[@peterbennpan7288]

What spring is in the standard baja 26cc 8000 or 6000

[@hybrid32494]

hey bro! Do you mean an Original HPI Baja with the Fuel engine?? I would assume all original Bajas came with a 6K spring, which is pretty standard for any motor under 29CC, it seems, based on my experience. You could take a look, if it's not a red clutch spring then it's gotta be a 6K one for sure, unless somebody has already made an upgrade on it (usually the case).

[@peterbennpan7288]

@@hybrid32494 its actually a red clutch spring that's in it and yes its an original 26cc HPI baja. I'm looking to upgrade the engine.....really don't know what one to get out of the Zenoah G290rc and the G320. So many mixed opinions. I will also be running a DDM fast pipe. What are your thoughts

[@peterrcbasher]

Nitro gang!

[@2shoestoo]

Japanese vrs Chinese. Japanese all day long for quality of engineering

[@adriannyasia]

Dude, I had to lower the volume.. 🤦🏼‍♂️🤯

[@raybenz6538]

You need to pick up some Permatex ultra black polyurethane it’s a GASKET MAKER It would totally work on ur exhaust That and red loc tite the exhaust bolts U don’t need much just smooth it around with your fingers cmon

[@FoundryRC]

👍🏻

[@snoopysrc]

Hybrid32494 redcat is super popular all there nitro and 1/5 scale out of stock now schumacher they disgust me only one nitro thats bad

[@hybrid32494]

hey bro! I was about to record a video about the current STATE of Nitro RC and talk abut all the redcat nitros getting discontinued along with most of their GAS RCs. it's an E-WORD World out there, but don't worry, we can still count on Traxxas to sell us 2-speed nitros, meanwhile people be hating on them. any 2-speed is a good 2-speed, you know!!! haha

[@snoopysrc]

@@hybrid32494 i get a 1/5 scale redcat nitro fuel to high in price and there temper mental

[@snoopysrc]

@@hybrid32494 redcat told me they be restocking them

[@snoopysrc]

@@hybrid32494 to bad u not closer by to me

[@snoopysrc]

@@hybrid32494 hey hybrid32494 they got a nitro on there in stock on redcat racing.com volcano s30

[@kewlbug]

good video but you seem lost when it comes to any of the technical details

[@hybrid32494]

hey buddy! thanks for checkin out this video. This video is an older one, I've learned alot about gas RC engines since. All I know is, 2-stroke 4 life!

[@nelsonbrum8496]

*box of engines...

[@kurtis3670]

Funny thing is that the current generation of dodge v8's aren't actual hemispherical engines.

[@hybrid32494]

hey bro! Good point! I would like to add, that the current generation of the entire JEEP, CHRYSLER, DODGE brand of cars is also TRASH, ahahaha. JK. But seriously, compared to a Japanese car like my prius the reliability and longevity rates on a Chrysler is Terrible.

[@nomusicrc]

I love you

[@hybrid32494]

the Nitrogang loves you too!! lol.

[@2blades_rc650]

Shit 20 seconds and 25 views damn man i was trying to get here first haha

[@hybrid32494]

ahaha, BRO, those were all my views and my Patreon supporters. I'm doing early access to some videos for patron members now, and of course I watched my own video like 15 times because I love the intro music! Nitrogang!!.

[@2blades_rc650]

@@hybrid32494 haha it was an awesome intro ill give you that. . . i like that you switch it up from time to time.

[@overbuiltautomotive1299]

get all thread in a good grade like 8.8 ..and make studs makes life easier and thing seal up better ..blaa blaa.,, Mc mastercar for supplys .pruisu is the only japan made thing i hate Japan makes good stuff the older stereos sansui are great get one re-caped never regret it no modern stuff dor home sound system dolpy junk

[@itta-pupu2]

Bro, your intro is wayyy too long

[@hybrid32494]

hey bro, it might be long but it features absolutely ZERO crawlers and zero electric. Some of the rarest GAS 1/5 scales are shown in the intro because I'm highly proud of them. I'm sorry you didn't enjoy the intro. But anyway there are new vids on that baja, it's running great now.