BUILDING THE FASTEST BMW M3 (PART 2)

To save money on your carVertical report use discount code 'chris' and this link www.carvertica...
It's time to see what a true pro thinks to our work on the #bmw #e92 #m3 that we installed a supercharger on. But first we have to do some essential work on the car including an exhaust upgrade, rod bearings, engine mounts and more!
Stealth Movements
/ stealthmovements
www.facebook.c...
Modstock - quote "slix5" for 5% off exhaust mods
/ mod_stock
A Reeve Performance - quote "Chris Slix" for £100 off rod bearing or supercharger installs
arperformance....
/ ar33ve
Join me on Facebook
/ chris.slix .
Follow me on Instagram
/ chris.slix
Email me
[e-mail]
Tiktok
vm.tiktok.com/...

[@Chris_Slix]

We finally made the dyno! what do you think to the results? To save money on your carVertical report use discount code 'chris' and this link www.carvertical.com/gb/landing/no-vin-precheck?a=ChrisSlix&b=38b26e3a&voucher=chris

[@tomleivers1]

Made decent power can't wait to see it complete

[@tw1g406]

I hope Ethan stays around after the M3. The vibes ace

[@user-oo3dv9vq8h]

Excellent video & I especially liked the input from Aaron & the AReeve guys..they obviously know their stuff inside out and were helpful when explaining all the little 'features' you had created when doing your installation!!! They seem to be a great team so a great find and the car is now fully sorted. You just need to now sort out the bodywork to complete the picture. Are you going to keep Ethan to help in future videos? you seem to have a great rapport which works!

[@chrisleech333]

Loving the M3 build. Needs a dry ice clean too. Personally I enjoy real world builds like this than watching yet another hypercar build

[@robswanson1040]

Good work mate, and fair play for tagging AReeve in to help, they're a great bunch of people an proper car folk, used them previously. 600 ponies, madness!

[@cunrah]

Aarons worked on my E92 M3, I can't recommend AReeve enough. Top guys!

[@bogdanobogeanu5758]

This guy that tuned the car is a BMW Guru 😊 great content ❤

[@hanspeterson9814]

Almost an 16% increase in followers in just 1 month - this build have people's attention, nice work!

[@DaveJMcGarry]

Chris (Modstock) did my 4 pipe and gutted primarys. His work is awesome. Also with those tips, you should ceramic coat them to stop lacquer peel

[@MrSyndiCraft]

The guys at Modstock did my F-Type V6 box mod and valve replacement. Great work from them and highly recommend!

[@kaisersoze6993]

Love how youre making progress. Been here since the start.

[@Username214_75]

E92 is the best build yet 👌🏼

[@aaronf4201]

Absolute monster. Aaron knew his stuff

[@TBat0431]

600 horses aint no joke. These M3s were a bit slow on stocks so this is the perfect upgrade 🎉

[@Boyce-the-blade]

Glad your back and glad your all good dude. We missed you Awesome vid 👍🏻

[@davpunk1986]

My man using a technical tap with a brick to fit them tips 😂😂😂

[@mod-stock]

It's a bit softer than a brick 😅

[@RavenRestoProjects]

@Chris_Slix you and Nathan make a great team hopefully see more future projects with you both , looking forward to seeing this one finished sounds incredible 🔥🔥🔥

[@TBat0431]

Done a great job on this one Chirs !! Supercharger kit aint no joke

[@MHRacing65]

Brilliant episode! What an epic build and this definitely needs to go to the ring and let Misha have a blast in it

[@J_S591]

Don’t get the hate here. He’s installed a supercharger kit with virtually no instructions. He’s supercharged a car that wasn’t meant to be supercharged so for one, that’s hard AF 😂. He’s not a BMW expert so how was he supposed to know all these nuances. He did it basically on a driveway. Fair play. Got as far as you could, experts helped, now you’ve got more knowledge for next time. This is how we learn. I’ve got a Boxter to build next, never done one, never done IMS, wish me luck 😂

[@tylerpartridge7823]

Thought I recognised that garage, I live down the road from A Reeve. Much love from Kings Lynn🤙🏻

[@aliherbert8519]

New to the channel of the back of you on MA channel. I like the style you do and also appreciate how much filming goes into a 20 min vedio fair play

[@rinsedetailingUK]

Great result, great video

[@nlocnil3602]

Sounds incredible! Not so much a screamer but a growler!

[@SAVING_ICONIC_MACHINES]

Just what I needed after a hard day at work, bro I love KZbin ❤

[@JRDetailingOfficial]

Ah mate you’re literally no more than 45 mins away from me at A Reeve!

[@Madmo1012]

Another great video Chris love your work mate keep it up. Still cant wait to hear the X3M running

[@johnrowell942]

Nice power gains just need a trip with Matt and the lads. To the ring

[@SAVING_ICONIC_MACHINES]

8:08 bro that’s sounding so savage it’s like it’s had the cams done, it sounds like a dragster 🤤🤤🤤

[@samuelbartle7136]

Love a charged V8 great content since selling the buisness mate keep up the good work loving the X3 stuff too 👍

[@F1-Passion]

Beast mode

[@TBat0431]

💯

[@ianwilkinson5549]

Brilliant enjoyment for you guys and great video.

[@johnchadbone]

Great vid bro, nice one with the build, beasty

[@JRDetailingOfficial]

I think we have all been there mate, working on my own vehicles I often find something that sticks out like a sore thumb when someone else looks. Glad you found the issue and Aaron is a star

[@jameswilson9537]

That car sounds amazing. Love it

[@robertmccoy9601]

Yes Chris that sound really nice and it’s gonna be a beast when fully finished

[@Ben-in6qh]

Someone loved that car previously looking at those bearings on that mileage 👌

[@waynefranklin8974]

Sounds wicked sick ❤ great stuff

[@kenreall723]

That's a slix sound there at the end of the video

[@thomasdewil1515]

Nice Job man!!

[@muzza6047]

Boy knows his stuff very impressive !

[@robertdouglas5926]

That sounds wicked!

[@hawaiisteve932]

Great video Chris , nice to see you can admit your errors & give credit to the AReeve crew for fixing them , he knows his schitt , very impressive.

[@raysteven624]

Do the rod bearings need bedded in or fit and good to go

[@AReevePerformance]

all measured to spec- let it warm and full send :) @@raysteven624

[@WijzeManNL]

Now I want a supercharger on my E92 as well

[@harrybosch5720]

Like you know your limits Chris and have some great input from the professionals. Not unlike MA. Good effort mate, respect.

[@AI-Records24]

Almost exactly the same🫣🤔

[@motivesupplies]

Love the M3 video series 😎✅

[@markhorne323]

That sounds the nuts!🤠

[@steventonkz]

*This video just demonstrates, hard work does definitely NOT beat talent*

[@andycowx9617]

That's funny

[@achromaticwraps]

that's what you get from wannabe KZbinr mechanics. Literally all the work they had done was GARBAGE. You live you learn, hopefully.

[@mattcoates_83]

As much as i love watching these videos and Mats too, there's always that feeling at the back of your mind... but has it been done properly - Although I've seen worse mistakes happen in main dealers! 😄

[@steventonkz]

@@mattcoates_83 exactly! The only car I’d purchased damaged of a KZbinr is Salvage Rebuilds. If I won a car in a raffle off Chris or Mat I’d sell it straight away 😂

[@AI-Records24]

@@steventonkzsalvage nation too, he knows what he’s doing and has akeel who is a smoking wizard.

[@TechwithPB677]

sounds amazing

[@fatherof583]

What a great sounding car!!!

[@lutha1720]

😂 I laughed at that coil pack I made the same mistake on a rebuild 😂

[@R19Robbin]

Such a sick project car 🔥🔥

[@ThePanospower]

Sick video man

[@melmarks3854]

Congratulations young men! 👏

[@danieljorge5788]

What a beast!!!

[@rickymoore3944]

Chris,...only 3/4 way thru and i think you should re-evaluate the affliction with the BMW marque....lol

[@SAVING_ICONIC_MACHINES]

Bro like I commented in the previous video when you down the oil change you shouldn’t of put such expensive oil until you’ve done the rod bearings, it is what it is tho bro 😎

[@aaronf4201]

I remember reading that 😂

[@SAVING_ICONIC_MACHINES]

Lol 😂 I knew he would have had them done at some point a lot sooner than expected 😂

[@TBat0431]

💯 what a waste of money

[@gregwilldoitllc]

A workshop full of supercharged m3’s…. Surely that’s telling you something Chris.

[@bash7862]

Looking awesome Chris can’t wait to see it all ready. Namz Boost replaced Rod Bearings on his 2013 M3 (yesterday on his KZbin channel) Must be a common fault.

[@omara3389]

Crank bearings also wear prematurely

[@diamondsink2000]

Replace rod bearings, fix the supercharger install and map the car in one day. Fair play to that tuner.

[@Kaasis92]

I'm not really a car expert but I think u should drive around for a few hundred miles and let the rod bearing to settle in 😮 Correct me if I'm wrong

[@geoffwatches]

God loves a trier mate! Just initially sending a car off to a mechanic to sort doesn't make for a good upload, this does. Keep em coming; keep on wrenching.

[@zildog]

612HP is mental! Even with the comedy of errors you just kept going and ended up with a mechanical M O N S T E R. Now... finish the body!!

[@mpglass8560]

great looking forward to more

[@johnelbro127]

Great video with lots of detail. Just a question how does this affect your insurance ? 👍👍👍👍👍

[@stephenboodle4555]

Sounds epic..😂💪👌..what a beast...have you got a fuel card...😅..Sunday blast car..mint...enjoyed watching that video..its going to be a nice car...👌

[@Gannonvoegtline]

Love the vids keep it up

[@TheCatoLee]

What a beast! Makes me want to hurry up my ESS schedule😅

[@NorthWalesPiscator]

Cannot wait to see it finished. It’s gonna be some car. 612hp I’d be off super car baiting 😂😂😂

[@carguyvlogs9764]

Nice work!!!! Thought I seen the car!

[@tyburcjusz]

This plenum looks awful. Not a hater but really after you watch Sreten the expectation level skyrockets😂😂

[@Chris_Slix]

Its coming back off and going for powder coating in the future. 😊 hope that satisfies your lust for perfection.

[@tyburcjusz]

@@Chris_Slix Chris it's mega that you've replied! I appreciate you took the time :) also please know I love the content and I do think you are growing so fast and quickly becoming one of the best YT channels - that is why I/we expect more and more of you. Keep up the great work and cheers from Poland!

[@syrconcrete6399]

Probably not the best idea to swap bearings and then slap it on the dyno... I would have personally tried to do 1000kms of chill low rpm driving before dyno

[@Ben-in6qh]

Why's that?

[@syrconcrete6399]

@@Ben-in6qh similar to piston rings and other engine parts that need to get broken in slowly, rod bearings work with super tight clearances and these need to be achieved nice and slowly before you start bashing on the engine so throwing on a supercharger and going straight to a dyno is not ideal

[@Ben-in6qh]

Do a slow run in with new rings and you'll have a smokey, oil burning, gutless engine for the rest of it's life. Engine bearings run on a film of oil, zero contact, so what are you expecting to happen?

[@harryfinch5404]

What a build - dont sell it or raffle it off, keep it!!

[@aliras3638]

Call up Amstrong for challenge with the M3

[@jamest5149]

Just don’t rev or thrash it until the oil is fully up to temp, that will save your bearings… its why bmw give you a oil temp gauge only and a moving rpm limit.

[@d765lt4]

Knew the ground was a part of the issue. Simple fix.

[@shukorzainuddin3159]

After finishing this m3 car... Bring it to track... We want it to see it racing

[@leehartley1667]

Brill mate 👍

[@TheNorthernmunky]

Awesome as always

[@guyrichards6721]

Hi Chris, great content. What’s the music called from 22:15 in the video - it’s beautiful?

[@willdobson6219]

Does he hammer the exhaust tips on using a brick for cushioning?😂

[@Chris_Slix]

Its a precision machined block of wood william 😅

[@JackMcNeillCars]

V8 Roadtrip pending...

[@Chris_Slix]

I think its needed 😅

[@paddychopper1973]

Result! Now make it look pretty 😉

[@MEchanicAL_LSTAR]

So when are we getting a video of you and Mat challenging each other to a rebuild off.

[@neiljemmerson8826]

80% wrong mote like 20% spot on haha, this is gunna be a beast

[@Chris_Slix]

I like your thinking 😅

[@samstratton]

As if you you was round the corner to me at a Reeve should of expected it really being an e92 m3 😂😂

[@artfulldodger33]

SO did they just roll the top rod bearings round into position?? (Have seen this done on Large Truck Diesel Engines before saving a full block rebuild)... didnt get to see the top bearing removal/install in the video...Edit: My Mistake that's Main Bearings you do this procedure I believe

[@stevehall-pl6my]

do modstock supply the brick ?

[@R55LSD]

Do the rod bearings not need bedding in before revving it out on a dyno? Or is that just with piston rings?

[@josh3466]

Wicked so far you need merch out man

[@Chris_Slix]

Its coming soon, super limited quantities though so be fast when you see it 😊

[@ArfansYT]

Your video made me cry engine oil ! Mad car I say let’s get the bhpitches higher Slixy !

[@yhshah21]

This was epic bro

[@MGSCRAP]

What a guy

[@aaronbutt6960]

Merch? ❤

[@ktmrad2786]

No need to run in the new rod bearings?

[@hands197]

AWESOME...... Love it 😍

[@stumainwaring8808]

Why would you use a grinder with no guard. Scary.

[@mod-stock]

Because to enable us to carry out our job properly we'd need 50 + grinders with the guards in all different positions for all the different ways we cut. It's about experience and how to use it whilst minimising risk. Keep moving a guard simply isn't feasible so you find yourself hindered and trying to cut awkwardly to get around it which also has it's own dangers

[@gbcautoworks]

You never needed to run in the engine after changing your rod bearings?

[@FLYSII]

Hope Ethan stays on this channel

[@TBat0431]

Yeah top fella