Installing LED Halo Tail Lights

[@toodanderson351]

New clear front housings and led switchbacks look great with those taillights.

[@mycorvettelife]

Stay tuned...

[@serenedelusions]

Agreed, have all those on my speedway white. Plus found those front housings melted heh.

[@toodanderson351]

@@serenedelusions mine were toasted and turned black. We both got lucky nothing burned.

[@wasson955]

Thank you we installed tonight and they look great! Please keep the content coming. My son and I are following your work and applying to our project!

[@Ricovette]

Hey Chris... I have the same HALO tail lights on my C5... What I did with mine that I noticed you didn't do was that I sealed the gap between the HALO and the 'Vette. It's a very small gap, but you know it's there. I took some thin black rubber foam weather strip tape, like the one you use on windows, and cut it to size. I then removed the adhesive backing from the foam strip and placed it inside the tail light hole. What you're doing, in other words, is making a gasket for the HALO's to rest on. I then installed the HALO's and they turned out AWESOME! It gives the HALO's a really nice finished look and those ugly gaps between the back of the HALO's and the 'Vette are gone! Just food for thought Bro... Stay safe... Rico

[@erickc5914]

Very nice touch this adds to the already iconic tail end 👍🏼

[@franco804]

Great video Chris. I finally figured out your exhaust that kept me curious for the longest time. You do have the titanium exhaust as we all know because you showed us the magnet test. But your tips are aftermarket Mid-America chrome tips. Somewhere down the line, the person who got that z06 exhaust must of had rusted out or damaged tips. So they had those put on.

[@studio-flash]

Whatsup Chris..wow..easy fix but what a difference..they are so cool and i'd definitely have the new ones. The clean white lines on your C5 look great. Hope mum n baby are fine...enjoyed watching your vlog as i'm off on holiday from work at the moment..regards from England.

[@JoKeR-vb5bb]

Looks very cool! I need that for my black C5!

[@carmenpete]

mine just came today ,can't wait update: I did mine Saturday, so a couple notes, my hardware was stock I presume, T5 touques, I bought the #8 stainless machine screws, they will fit but not as easy as stock. Stock is not a machine screw for me, so I cleaned it up a bit and they went back in much easier . I found it harder to line up the machine screw to the mount, that's about how it goes for me normally 😝

[@Stinger430]

They look awesome! Even in the daylight when they're not on. Great purchase!!!

[@bobbybannerman4547]

NICE VIDEO. TAKE CARE

[@Stugots6]

Thanks Chris, great video.

[@Team512]

Love the feeling of peeling off that plastic...Looks great!

[@PRACERZ]

Very sweet 👍🏻

[@119heath]

Looks great man! I plan on purchasing a set for my c5.

[@philtroskey3454]

I learned something I didn't know they were Plug and Play I thought I have to do some wiring thank you

[@rob29032]

Did you ever find out answer??

[@ronaldportillo448]

Hey I’ve been considering getting a ‘99 white C5 since this guy is giving me a good deal. He wants $6500,it has 46500 miles and he’s the only owner. The only thing that doesn’t work are the retractable seat belts.His reason for selling is that he has 4 cars and barely drives it anymore.

[@mycorvettelife]

Buy it!

[@jstardhami9958]

Looks fantastic

[@ronmsimmons]

Love it!

[@logicalmisery3737]

I have this set and one of my halos isn't working, how would I diagnose if it's a wiring problem or internal to the tail light unit?

[@lenorencepayton6879]

One of my halo mod taillights are out. Any idea on how to replace the bulb?

[@brenbuchler94]

Need to get a set on my car!

[@leecovette6895]

I have been wanting these they looh great cant eait now

[@kirkendicott5521]

Sweet how about the third brake lite?

[@toodanderson351]

It's led but not as bright, there Is one that matches perfectly on Amazon for like 35

[@howardhassell9132]

mine look and work great

[@rob29032]

Did you have any problems with hyper flashing. New to corvette world just purchased a c5 and want to start doing upgrades including lights but every article I read says you need a harness to fix this problem.

[@mycorvettelife]

Yes, you need the hyperflash harness.

[@Justiceinabarrel]

I like em but i don't like the extreme change between stop and turn. Maybe it the camera but it looks pretty bright.

[@mrdeanv4414]

Looks awesome...! Do they make these Halo Lights for a C4 95 corvette?

[@mycorvettelife]

Not to my knowledge.

[@fladrummer1]

Hi Chris, love the video's trying to decide and not quite sure, there is a lot of aftermarket tail lights on ebay not sure there coming from the same source i want the best do you recommended Corvette Envey or another source ?

[@mycorvettelife]

Corvette Envy

[@autotrimmers6353]

Thinking of getting a 80k mile 2001 u think it’s still a good example

[@mycorvettelife]

Yes

[@philtroskey3454]

They have them for sale on Amazon for $240

[@sf1of1]

Phil Troskey good looks !

[@heliarc099]

Chris is your 3rd (middle) brake light already LED in this video?

[@mycorvettelife]

No

[@mike1996harley]

Love them. We’re is the link to order them

[@mycorvettelife]

In the video description.

[@philtroskey3454]

You can find them on Amazon Corvette parts

[@tartaruszelus5473]

They make a c4 kit?

[@mycorvettelife]

Not that I know of.

[@Mrbadsport]

Personally I prefer non halo led tail lights with a bit of a smoked look

[@naamangeist7843]

I just bought the same ones on Ebay for $220 and will be doing the halo mod myself with the help of a video tutorial here on KZbin. However, I have an issue with these and notice yours has the same issue. That being, the locking tab for the bulb socket is way too short to be useful. The bulb socket is also very loose fitting, causing the bulb socket to jiggle loose and fall out while driving. This makes the housings prone to moisture inside the lens, seeing water can now enter through the bulb socket hole. For the price of these, this is an unacceptable quality flaw.

[@mycorvettelife]

EBay doesn’t have the real ones. There is a reason they are cheaper. Mine are not loose. In fact sometimes they are too tight and can’t get them off.

[@naamangeist7843]

@@mycorvettelife Then you must have thicker lamp holder gaskets than I do. Either way, they don't have long enough locking tabs like the stock housings, therefore they cant lock on like they should. Think I may order a set from Corvette Envy just to compare them. From what I can tell by their pics, they are identical in every way. Even has the same white "20180307009" part number sticker on the back.

[@naamangeist7843]

@@mycorvettelife I just purchased some foam rubber adhesive gasket material on Amazon so I can make thicker gaskets for a tighter fit. I can tell from your video at the 4:00 mark that yours are still loose also. Here is a link to the gasket material if your interested: smile.amazon.com/dp/B01IC7THJ2/ref=cm_sw_em_r_mt_dp_U_Yh23DbSA4HH2R

[@naamangeist7843]

Also purchased a compass cutter for making perfect circles, cheap on ebay: ebay.us/wsfG6x Fits nice and tight now :-)

[@sickskater113]

aint no way this man put his car on jacks to change the tail lights