TR6060 6 Speed - Overhaul for the 1969 Camaro!

[@millsmotorvation]

I wouldn't have the nerve to do that trans shaft swap, but you gave me some hope 😊

[@Nickyb801]

Nice work. Transmission looks very intimidating. I bet it feels good to have it done.

[@TheLooper0]

Wow,! I give you credit, there is no way in hell I would have attempted that. I would have pulled out the credit card. Good job.

[@speedhouse3147]

lol shift forks messed me up too! Not because i couldnt get them all together, but because i drove the roll pin out for the alignment collar [so i can install the rod while the forks are installed] and i ended up putting the collar on upside down....... couldn't figure it out for 3 days...... had to remove a sealed bellhousing 4 times before i caught it..... talk about frustration, but now i know and like you said, these things will be a breeze to go through now. :D

[@meatman3042]

Great channel ! I wish I could build my trans am like this .

[@DonnieZR1]

Awesome video, turned out nice!

[@mikew6135]

Man thats nutz. Good for you. Just do it! Id have to have a GOOD manual to even think about attempting that build. Ive got a 6sp Hellcat with the 6060. Id like to faceplate it but i would have to send it in for sure

[@nomad4x]

Schaeffler \ Luk is really good quality! They OE to every vehicle manufacture.

[@Alpha_Video]

Best part 26:15 😂… Shows you have the same struggles and frustration as the rest of us sometimes

[@Charged1611]

Incredible job.

[@JuJu-vj3bz]

Wow! That just blew my mind. Great job.

[@36couperAl]

Is there anything you can't do?? Amazing!

[@richardwilliams2248]

Dude that was amazing much respect

[@1sickss120]

You don’t happen to have part numbers for the clutch and flywheel by chance?

[@iananderson9496]

It looks like it might be LUK 04905 but I can’t be sure. I’d like confirmation as well

[@jessejames247]

I’m currently putting together a 67 Camaro it’s got the gen v lt4 with the ten speed automatic 12bolt posi body was chemical dipped all original panels no rust California car

[@mathewshackelford8037]

Sweet video man! Is it ideal to use that bearing grease vice just lubricating the bearings with the transmission fluid you'll be running? Also, I love those press tools you used towards the end pressing those gears on.

[@RickENelson]

Great video. Takes guts to tear the guts out of that transmission. Will that clutch and flywheel setup fit my 2005 CTS-V LS6?

[@ChrisSullivan69]

Yes it will

[@claudetremblay700]

love this series !! had to subscribe, what was that book you had on floor at 7:03 ????

[@petercarey6883]

I have to ask Chris, what's with the use of the word "we?" Do you have an invisible assistant? 😉 You pretty much seem to be a one-man army to me. A tour de force if you will.

[@marksullivan55]

He's referred to himself using the royal "we" since a very early age.

[@petercarey6883]

@@marksullivan55 Ah, so he has an invisible friend. At least "they" get along. My invisible friend and I don't get along. 😉

[@LT4Nova]

Any way you could list the individual parts for the conversion? I'm looking to piece a kit together...IT WOULD BE VERY MUCH APPRECIATED!!! THANK YOU

[@speedhouse3147]

the kit is EXTREMELY difficult to locate. I struggled to find mine and i paid close to $1000 for it...... so tr6060 for $1400 and conversion kit for $1000, already into the trans for $2400 and you still have to do exactly what he did in the video, plus youll need a shim kit....... probably better off purchasing a t56 magnum

[@LT4Nova]

@@speedhouse3147 I have a camaro tr6060 already.

[@mathewshackelford8037]

@@LT4Nova you just have to search for the conversion kits. I've yet to find one either and I've been looking for a while now.

[@richardmcpherson8322]

Where did you get the parts to do the t56 conversion? I scored a free tr6060 and want to do the same thing for my cobra.

[@semirm8248]

How much power are you putting through this clutch and how is the feel. I can looking at this clutch set up at rockauto

[@Fl4m3thro3er]

Where did you get the kit to do it? I have a tr6060 now.

[@janessaddlebag3468]

Hey Chris, we just picked up a LS3 but has auto trans. We are wanting a manual. I noticed in the video the 6060 to T56 rear. The question i have is did you do this to avoid the cost of just getting a T56 trans? I'm wondering if we should just buy a T56?

[@ocold-gp3oi]

Have you had any issues with that bit of wear on your input shaft from a pilot bearing? I did this exact same mod to a tr6060, only to realize after assembly that the input shaft was worn down too far from a pilot bearing in a past life. So i get to tear it down again lol

[@ChrisSullivan69]

None!

[@aldoortega2170]

Do you have any info on where the tr6060 came from? I sourced one from a 2014 hellcat and need to adapt it to my gen3 6.0 h.o. Looks like the bell housing isnt integrated into the rest of the case

[@brucemclean7323]

That was so fucking cool

[@jacobjarvis2545]

What did that setup cost all parts included

[@bensinger7998]

Where did get the the conversion kit

[@joeknowski675]

Who did you have tune the holley terminator x for you?

[@ChrisSullivan69]

Holley lol

[@joeknowski675]

@@ChrisSullivan69 you didn't use a tuner for the base tune? I've heard a lot of people have issues

[@defritzel]

Rockauto's price for my flywheel is $1000