Christmas Cutting Board/ DIY, Long grain cutting board

[@waynekitt6770]

Love the music - It made the video even more enjoyable. Beautiful cutting board. That's a nice combination of wood types - it really pops. Thank you.

[@deckerdoesitdiy]

Thank you very much! And thanks for watching.

[@paulreed1927]

Absolute stunning cutting board, its watching videos from guys like you that made me want to get into woodworking, you seem so humble too. Cant wait to see your next project 😊.

[@davidselders4670]

Awesome build, I like how you are using tools that most of us can get! Thank you!

[@deckerdoesitdiy]

Very welcome, Thanks for watching.

[@tonythompson457]

Merry Christmas to you too, from Tony in Cheshire, England.

[@deckerdoesitdiy]

Wow I'm super excited that this video reached across the pond like that. Thanks for watching

[@artn.wooddesign]

Me encanta tu trabajo y la sencillez de como lo haces, felicitarte por ello

[@Malba1776]

All ur work came out clean, u obviously have skill so run with it n keep makin saw dust !!!

[@deckerdoesitdiy]

I appreciate you, Thanks for watching!

[@FiaCat7]

Thanks for the Christmas music

[@deckerdoesitdiy]

No problem,Thanks for watching.

[@TheDopalgangr]

I was subscriber number 340, glad I found your channel today. Keep up the good work!

[@deckerdoesitdiy]

Thanks for the sub! And welcome aboard. I'm super excited that I am actually even getting 1 sub let alone 340. I appreciate your time watching the video and commenting also, It defiantly helps the growing process.

[@Jamesonwestfall]

Great job I am also doing boards for Christmas.

[@deckerdoesitdiy]

Its a great moneymaker, I have made so many I am almost tired of doing them, but If a customer wants one I don't hesitate on the opportunity. Thanks for watching.

[@mattjones3490]

This came to me today. Thanks for sharing your joy of simply woodworking with us! I think your cutting board turned out great, and the camera work just makes it feel much more authentic.

[@deckerdoesitdiy]

Thanks I appreciate the comment, And I tried hard with the different angles to maybe keep you engaged since the video was so long, I'm glad you enjoyed it and thanks for watching.

[@AmauryRodriguez-n8e]

Beautiful work Brother and happy holidays to you and yours! Thank you for sharing!

[@AmauryRodriguez-n8e]

oh, and loved the simple acoustic guitar too!

[@deckerdoesitdiy]

Same to you! And thanks for watching

[@mattsco10]

Merry Christmas to you as well!

[@deckerdoesitdiy]

Same to you! Thanks for watching

[@andymarshall2201]

Great video, thank you, I am just about to start making cutting boards. Merry Christmas

[@deckerdoesitdiy]

Have fun! And thanks for watching,

[@gwgaskin]

Agreed.. my Dust Right has been a great addition to the shop!

[@deckerdoesitdiy]

No doubt!, Thanks for watching

[@joeberlin9964]

Nice work !!!

[@deckerdoesitdiy]

Thanks for watching!

[@williamarner4637]

Very nice

[@deckerdoesitdiy]

Thank you, and thanks for watching.

[@davidnixon517]

Really enjoyed this. Always trying to figure out what to do. I’m still fairly new to woodworking.

[@deckerdoesitdiy]

Glad it was helpful! ,If you ever have any questions just message me in the comments and maybe I can help, stay safe and thanks for watching.

[@owenharris6612]

Beautiful workmanship. Love how your cutting board turned out. I am glad your video popped up, watched it and subscribed to your channel. I am a novice woodworker and always looking for something to try. Thanks again for your video.

[@deckerdoesitdiy]

Thanks for the sub! And welcome to the hobby that will surely drain your bank account lol. Cutting boards taught me a lot about sanding and being patient thru the process. Thanks for watching

[@johnnynelson3175]

That is beautiful and I loved the camera angle’s so I could see what you were doing I’ve been thinking about trying to build some cutting boards but that looks really good

[@deckerdoesitdiy]

Go for it! They are fun but once you made about 100 of them not so much anymore. Thanks for watching.

[@randymorris765]

Beautiful choice of wood! Beautiful work! Thank you for the ride along...

[@deckerdoesitdiy]

Thank you too! Im glad you enjoyed it, Hopefully soon I will post more projects. Thanks for watching.

[@rickpouley7561]

Beautiful Board!

[@deckerdoesitdiy]

I think so too! Thanks for watching

[@edhuck5664]

Great job, beautiful board. One to be proud of. Keep it up!

[@deckerdoesitdiy]

Thanks for watching

[@jonathanhansen1222]

Great craftsmanship & video! Well done, sir.

[@deckerdoesitdiy]

Thank you kindly!

[@hipster4200]

Beautiful board! Assuming it was a mistake but this is a face grain board. Thanks for the vid!

[@deckerdoesitdiy]

Sorry if I said end grain, I meant for it to be a long grain

[@davemccracken6436]

Nicely done. Gorgeous!

[@deckerdoesitdiy]

Thank you! 😊Thanks for watching

[@davidbutler2098]

Just watched your cutting board build absolutely loved it, I’m hooked great job . I will be a dedicated follower 👍

[@deckerdoesitdiy]

Awesome! Thank you!

[@CAMEO1955]

Great looking board , I hate sanding my self ,, Like you said leads to a great finish ! Have Merry Xmas ! ( New Sub )😎

[@deckerdoesitdiy]

It's the worst isn't it. Thanks for subscribing and watching. I appreciate it

[@Newbie211k]

That was amazing.

[@deckerdoesitdiy]

Thanks for watching!

[@MrBernie101]

Hey, what a good channel ‼I have just stumbled across it, no, not out of the Pub. Loved the music too, is that your work also ? Keep 'em coming Mr Decker. Seasonal Greetings to you & yours and a HNY. I'm hooked and subscribing. Kind Regards, Bernie SW Wales UK.👍😎

[@deckerdoesitdiy]

Thanks for watching and Subscribing I really appreciate it. More videos on something going on around here soon.

[@CreativeCustomDesigns]

Very nice board........ The serving tray looks AWESOME. Very nice choice of woods. I just started making boards......first batch of 10 is just needing the finish. I'm looking forward to the next 10. I've been thinking about getting my own channel, but I'm just not feeling that comfortable or confident about doing that. Thanks for the video.

[@deckerdoesitdiy]

I'm not very comfortable either, you can probably see it in my face. I have had family pushing me to do it so I just thought screw it, they would either like it and watch or just find something else. If I had the right equipment to make the videos, I'm sure it would be easier. But anyways Thanks for the compliments and thanks for watching.

[@OFareWoodworking]

Nice 👍

[@deckerdoesitdiy]

Thanks ✌

[@kbusch011]

Looks awesome!

[@deckerdoesitdiy]

Thanks seestor

[@JamesWelbes]

Anybody else waiting for his sleeve to get caught in that blade? 8:10

[@deckerdoesitdiy]

Your right, I did have my arm far enough to the right to make sure it wasn't going to happen. I think it was about 29 degrees in that shop that morning too. Thanks for watching

[@JanHilt]

Looking good. Thanks for the video. One thing I would say, those pins you set the board on, I had them too, but for me, they left a mark, a little pinch hole on the board every time I used them. Don't you have that? Cheers, 👍🎈

[@deckerdoesitdiy]

To be honest, I think I might have seen a couple of marks on the boar because of those pins. Your right though when It comes to projects like this I don't think I will be using them too much anymore. Thanks for watching.

[@rgeorge5353]

Absolutely beautiful cutting board! At first, I wasn't sure about the chamfered edges, but I agree, they do give a modern look to it. I also love your straight edge jig instead of a jointer. I've got to make one of those myself! Could you share the dimensions for the one you have? Thanks for all the tips and tricks you showed in the video.

[@deckerdoesitdiy]

Thanks I appreciate the complement, I will get you those dimensions on that jig. Possibly on Friday if that's ok. I might just make a video on it. Thanks for watching.

[@Jeff-jg7jh]

I like the modern look too. I liked the first cut, and then the second cut nailed it. I built a cutting board in the eighth grade (jr. high) so I wasn't too excited about this vid and watched just to see how lame it was. Big surprise, very nice vid. Well produced. Way better than my cutting board, but I love it and still own it. I was going to give it to my brother, but his wife said that wood cutting boards are hazardous to your health (not even CA) so I kept it. I'm subscribing just because it's laid back. Oh, and a real good cutting board should have a handle (like mine). If a cutting board goes unused it breaks its heart. No one knows its story. Man, nice music.

[@jimkeen2668]

Great video, the music was a good touch, when you did the closeup with the oil that was amazing, can you please let me know what fence you’re using? And if you like it? I have the same saw but with stock fence, and it’s a struggle. Merry Christmas

[@deckerdoesitdiy]

Hey Thanks for watching, the fence I have on the craftsman is the Vega Utility 26 from Rockler. And If you have a craftsman 113 that you just don't want to part with I highly recommend it. Sure it's a little pricey at I think 350 But Still cheaper than buying a decent table saw and well worth it for these old craftsman saws. Pretty easy to install and square up also, and that fine adjustment is extremely handy as well. I hope this helps and stay safe. www.rockler.com/table-saw-fence-systems

[@herbsu4330]

Do you have a video on your dust collection for the tablesaw?

[@deckerdoesitdiy]

I don't yet but maybe I could do one if you are interested. Thanks for watching

[@herbsu4330]

@@deckerdoesitdiy I have the same saw and have a velcro attached dust bag now which is a pain to empty.

[@deckerdoesitdiy]

@@herbsu4330 My craftsman saw isnt very good at dust collection as you can see when I use the jig or cutting strips, mainly because of the zero clearance insert on the saw. the dust port on the bottom gets some but still some blows out the back. It is what it is. I cant afford a new saw at the moment but I will be happy when I do get one.

[@herbsu4330]

I have had this saw since 96 and have toyed with the idea of a newer type, but it still does what I need it to do so I have stuck with it. I run a 20" box fan with a filter for the air born dust along with a masķ.

[@jamieduv]

Very beautiful work on both the cutting board and serving tray. On any of your previous cutting boards, have you ever done a juice groove around the perimeter? It would have been interesting to see how you did that on this cutting board.

[@deckerdoesitdiy]

Yes I have, the reason I didn't do one on this one is because the router bit I have been using is dull. The last groove I cut in a board caused so much burning, It took 8 hours to sand the burn out. So until I get a new bit I have been doing them with the chamfer. Thanks for checking out the video.

[@sakaj]

Nice board switch to TITEBOND 3 for your glue from now on.

[@deckerdoesitdiy]

Thanks for watching, But I'm going to pass on titebond 3, I just don't like the color of it when it is dried and the strength isn't what 2's is.

[@sakaj]

​@@deckerdoesitdiyInteresting I never had a problem and been using for years. Enjoy your holidays.

[@watchmewatchthis6531]

Where might I aquire a stamp like you have to mark your work?

[@deckerdoesitdiy]

I got mine at Gearheart Industries, they do great work. Thanks for watching!

[@kingdomtouchesbyajayrichrn6077]

Beautiful! Were you planning end grain and changed your mind?

[@deckerdoesitdiy]

Im sorry if I said end grain somewhere in the video, I must have missed it. But no I meant to make it long grain. Sorry for the confusion and thanks for watching.

[@kingdomtouchesbyajayrichrn6077]

@@deckerdoesitdiy you didn’t say it. It’s in the title. No need to apologize. I enjoyed watching the video just the same. Great work!

[@deckerdoesitdiy]

@@kingdomtouchesbyajayrichrn6077 Thanks for the heads up I didn't even notice that lol. I'm still trying to get used to doing KZbin videos. I really showed you I'm not a Professional by any means lol, hopefully I will get better with time. I fixed it and I appreciate you.

[@tonymarrazzo354]

@@deckerdoesitdiy Everyone starts somewhere, even the Wood Whisperer way back when. You did great, had a great board and you learned - doesn't get any better than that. I too will be doing a channel soon and am nervous just like you.

[@Litehamer]

Thanks for a great video . Im a very very new woodworker , and I’d love to make something like this for loved ones . Is it right to say that you’re gluing up the end grain so that the faces are the work surface ? New subscriber today . Thank you

[@deckerdoesitdiy]

Yes you are correct. thanks for subscribing

[@wcgraham3609]

You should put a Guard on the back side of your Sled. See time 8:14 for why you need a Guard.

[@wcgraham3609]

See time 8:14 in video for why you need a Guard

[@deckerdoesitdiy]

If I put a guard on the sled then I couldn't store it where I usually do when not in use. Thanks for watching

[@cswatson4823]

I like your wood. Awkward……Ummmm. Your wood working.there. Nice job and I like the Bucees t-shirt too

[@deckerdoesitdiy]

Lol thanks for watching, That was my first Bucee's experience while I was in Tennessee, I came out of there with that shirt and 4 bags of beaver nuggets

[@idkwhattonamemyself9647]

couldnt you of ripped the boards regularly through the table saw at the begining instead of using the jig? or was the other side not squared?

[@deckerdoesitdiy]

The boards wasn't squared yet.