Montech XR Build - Step by Step Guide

[@mayonnaiseeee]

I haven't built a PC in over 10 years. Decided to go with this case. Thanks so much for the video, massive help! I am also shocked at how big that GPU is...things have changed a lot lol.

[@weaknessez]

Yeah technology just increasing exponentially

[@shuvi1565]

Hey how are the temps & noise with this case? If you already assembled it, how was the process? I am also planning to buy this case

[@markod7662]

Build is very nice and there is value in this case. I would use a gpu anti sag bracket with any bigger card. I really love how you show outside of the case which connector goes where. With your help, any novice can build a pc. Keep up the brillient work! 🎉

[@ChristopherFlannigan]

Thanks

[@A.Gproductions_]

@@ChristopherFlannigannpc ahh reply 😭🙏

[@StraightFelon]

just wanted to personally say thank you. Bought this case and needed some specific help on a few things. Good video man

[@echoingfury4759]

i cant get enough of how you pronounce "case" - it´s so catchy and satisfying at the same time

[@b3as_t]

Just purchased this, will be coming tomorrow. Want to say thanks for providing information on the connections on the argb fans, they have not documented it anywhere what sort of connections they have or if they are daisy chainable etc.

[@shuvi1565]

How are the temps & noise levels with this case?

[@b3as_t]

@shuvi1565 I'd say the most noticeable thing is my gpu fans WHEN they are running, I'm only using 2 intake and 2 exhaust fans on a very low rpm fan curve, case is dead silent. But yeah, great budget case.

[@shuvi1565]

@@b3as_t Nice! Ordered it for 64€, really existed

[@atl126]

really impressive/intriguing case at that price!

[@ChristopherFlannigan]

Sure is

[@DENNUZ]

Hi ,, i have this case (bought it completed with everything installed) its magic ... nice video .. keep it up ;)

[@ryanjensen4604]

I will be buying this case, thanks for the quick walkthrough and you have a beautiful design.

[@bavarianbanshee]

Frankly fantastic video. Everything is presented clearly and thoroughly.

[@travisheasty7708]

Great video! I just picked up that case and incant wait to build in it!

[@xbonezy]

Really enjoyed this video. Will be getting this shortly to replace my current case. Love that the side panels just pop on and off! Thanks !

[@MikeBob2023]

That's a VERY well specced build you have there, Mr. Flannigan. Those Thermaltake reverse fans are absolutely *perfect.* A true stroke of genius. 🙌🏼 I'd happily purchase the Montech XR -- if I didn't already have *5* brand new (still in their boxes) cases awaiting builds -- including 2 of Montech's latest and greatest (the SKY TWO GX and the King 95 Pro). 😎 P/S: That's my screwdriver you're using. 😝

[@timmuller2582]

Case just arrived and your video was very helpful. Thanks a lot!

[@TechTalkTobi]

6:32 ... wow! really nice work/cut to show the connection also outside to get a better view!

[@jimg.9198]

Thank you for the review, I just bought the XR Case and Hyperflow AIO. Looking for forward to the finished look.

[@RepackTest]

Good Content & Detailed Info on the case as always.

[@ChristopherFlannigan]

Much appreciated

[@The-Real-Kevin]

That is a nice looking build! 👍

[@MsQueen-2020]

How sturdy/quality build is this XR, compare to Montech 903 or Sky Two?

[@MrRayr1953]

Great looking built.

[@gamerstreater9314]

So... can the fan's rgb and speed be controlled without a fan hub? with the way you built the pc?

[@LEX-yi8sv]

Great build. But I was wondering how do you control the RGB on the fans since there is no button on the case for it.

[@cookieapple994]

Motherboard software

[@Sul_X07]

Hey nice build but I got a question . So for the bottom fans do I need a fan hub if my fans doesn’t connect magnetically?.

[@Veraxum]

Just finished building with this case, and I noticed that your stock fan colors are blue and mine are rainbow. Did I do something wrong, or is there a way to change the color?

[@jlara96]

Did you have problems installing the gpu with the side intake fans? I'm using a amd gpu and it doesn't seem to go in properly because of the fans.

[@AadiVerma-l3b]

im thinking of getting a thermaltake aio and a pack of 3 thermaltake argb fans. will i be able to control these fans with the provided montech case fans using the same software? or will i need an rgb hub to connect all the fans to?

[@forsaken7161]

Mr. Flannigan, do you think a 280mm Radiator might fit on the top? Even tho its not officially supported? thanks in advance ☺

[@Games_and_Tech]

Could you fit an Arctic freezer with 360mm on top?

[@Fakeliquid]

I got this case on pre order from scan honestly its amazing for the £49 i sent back the king pro because it was way to big. Didn't like the curved glass.

[@goldenmoon_26931]

I was thinking about making somewhat an exact build but I wanted to mount the gpu vertically, would it be possible to do it without having to remove the bottom fans?

[@viktortrolle6005]

can i control al the fan rgb at once and make them sinc together? both the case fans and the AIO

[@thoivuongvinhphat7990]

Hi sir! How did you change the color of the fan into white?

[@skrttsk6163]

planning to get this case for my first build, i got a question if the built fans bring air in or out of the case

[@balubian3852]

Very good video, thank you. Did I understand correctly that the two fans at the back pull the air out?

[@kinggillz2628]

i have this case but i have the gigabyte b550M K motherboard and there isn’t enough slots for the integrated fans what can i do

[@JeremiahJobin]

What you need is a Fan Controller. What it does is it combines multiple 3 or 4 pin PWM fan outlets into one 4 pin PWM connection which will only occupy one slot on the motherboard. The Deepcool FH-04 Fan Controller is a great option for its price but if you need more slots on the controller, ARCTIC Case Fan Hub Fan Controller is another great option. As far as I'm aware, these do not support RGB so if you need RGB control, go for something like the NZXT RGB & Fan Controller (2022) Fan Controller. Hope this helps!

[@Ctrl5x]

Having issues figuring out the fan cables any chance you can help?

[@russellbower2557]

Supposedly the non E version has better VRM but I can’t find it in the US. Is the X670E Steel Legend WiFi worth another $40 US over this E model ?

[@ChristopherFlannigan]

I've only used this one

[@ZondaRbg]

Nice case for that price! What do u think is the best case for best GPU temps?

[@ChristopherFlannigan]

Good, but not the best

[@itzcrazy1018]

How did u change the case fans colors?

[@keymirrortic]

Hi, how do you make the fan non rgb?

[@gaemer3967]

You need to show us the backside of the case and what cable it is because im struggling not knowing their names if they don't have them written on them. Mostly the fan cables, don't know which ones they are and also i have a usb looking cable i dont know where to plug on my motherboard

[@kamiya617]

Yes this video went through the cables too quickly and didn’t explain much

[@bebo3418]

Does anyone know why that red light is blinking. I assume it's ok cause in the video his is as well as mine. Read that it's the HDD,SSD or something working. Is that right?

[@crimi545]

How did u change the color ?

[@MrNoMoney-l3o]

My gpu is 3.5 slot big and there is no space for me to place my pc fan. Can i place them under the psu shroud?

[@JaKaIsCoOl69]

Did you have to install anything for the front panel to sit correctly, mine doesn’t stick on the top

[@Bevo-y1h]

Where are the accessories located

[@marioluigi738]

Can we replace the 2 side panel fan with AIO radiator 240mm?

[@aldotheyoutuber]

Can i use random thermal paste because i cannot find that one.

[@medesude]

Yes you can it won't matter

[@flyboysmokes]

can i buy the standard fans and put them as exhaust and intake

[@marcclarion6586]

Dowsnit support vertical gpu mounting?

[@ChristopherFlannigan]

No there is metal between the slot covers

[@zaritheyzwan3979]

Is it possible to vertical mount gpu using this case? With a 4070 super aero

[@mattrubio2719]

Trying to figure this out as well, if not it’ll be dremel and drill time to rig it it up 😂

[@yazzygurl]

IDK why but non of the fans are detected in any rgb software including aura sync. (using b550f strix). Signal rgb wont detect it either but fans and lights are functional.

[@easterbunny4522]

Does it fit a full atx power supply?

[@Bevo-y1h]

Where is the acssesorie bag located

[@flyboysmokes]

Are the fans 4 pin pwm

[@ИванХалим]

No. They're 3 pin because it's ARGB

[@ribeirinhu]

that card sags soooooo hard 😂😂

[@ellonysman]

😅Beautiful❤

[@ChristopherFlannigan]

Thanks

[@The11devans]

That price is crazy for what you get

[@ChristopherFlannigan]

Don't know how they can do it

[@HyFlexx]

No io shield??

[@frafra224]

cant you daisy chain all of these fans into one single argb header?

[@SylvianLight]

9/10 video because you forgot to put an anime action figure inside the tower. get it together man...

[@SpiffingDay]

You didn't show IO installation

[@andrs13]

It's 2024 👀USB 3.0 + TypeC = approval

[@gaemer3967]

Sorry but could you please add some subtitles? Idk if im tired rn but im struggling so hard to understand some parts since I'm not used to the terminology and you have a rather heavy accent 😅

[@rodolfoalvarez3287]

that graphics card leans too much you should've grabbed a gpu bracket support instead of the extra fans

[@Ifishbass]

My egg with h the is case doesent work

[@JasperPloum]

My case fans won’t spin

[@JROCC205]

Did you fix it ?

[@vrekman256]

+1

[@marcusorillius6971]

You’re so hard to understand