Chrysler 300 fuel pump replacement diy how to.

[@ShatteredHawk]

So, my fuel pump was going out. Limped it to the auto shop. They told me it was gonna be $323.00 parts and labor. No Shit, waiting in the waiting room for 10 mins I watched this video. Good thing they haven't started yet on my 300c. Stopped them, asked for my keys back. Drove it to Advance Auto parts... replaced it in under 15 minutes in their parking lot for only $135.00 part cost. Thanks bro!

[@sogapoc9747]

smart man, always try to do your own work, the only time i say go to someone else, is generally transmission issues, those are a bitch to fuck with, i know how to do some of it but refuse to because fuck that lmao

[@Gabby_a.k.a._PuroJohnK]

Nice! Good for you! 👍🏼That’s actually pretty cheap though. Some of the places around my area you’re looking at 700+ which is absolutely Crazy! One place told me if the injectors on my dodge go bad they want $6000-$9000 ! Wt* was my response.😳. I’m gonna do the pump right now because I think that’s the problem.

[@alexmarquez348]

even the small details regarding how you unplug it can save anyone a massive headache if it's their first time. by far the best video I've seen on this topic, thank you.

[@Showtime_81]

Thank you sir this is just what I needed. Just replaced the pump in my 2013 300 and thanks to you I was in and out in about 10mins.

[@kingzoe791]

THANK YOU SO MUCH. THIS VIDEO WAS KEY TO REPLACING THE FUEL PUMP IN MY 2005 DODGE MAGNUM YOU SAVE ME MORE THAN $300.

[@MegaMarclar]

great video... I must say though... everyone saying "my local shop is full of crooks".... go ahead... open your own shop, pay the techs, pay the insurance, pay the TAXES.... then tell me its too much.

[@Beyond1031]

Quick, straightforward, to the point. THANK YOU.

[@milspecmachine]

Awesome video man thank you for sharing it and changing the pump with one hand is very impressive 👍🏻👍🏻

[@davidpratt3486]

Great video Sir... especially with one hand... thanks very helpful

[@philshnieder9188]

Finally.a.real video.showing me where.its.at. Thanks

[@AlazeLuxxx]

Got it done! Thank You! 06 Dodge Charger 2.7 V6 Fuel Pump Replacement

[@svglorious]

Best video on KZbin for this project… Highly recommend getting the special ring removal tool from Amazon

[@crystalslayforthegawds270]

I just did this 10 minutes ago after watching this in my 05 Magnum..popped the seat, bam bam boom I was done. took all of 10 minutes! 😁 saved me a few hundred, mechanic made it seem like a long ass process😒 because I'm a girl , ha take that ! jerk

[@jackmeyers2911]

Crystal Burnett nice! That's awesome! Glad it helped!

[@donarosamelquioteprieto5450]

Jack Meyers how did u found out the gas pump wasent working?

[@chelo2626ify]

Crystal Slayforthegawds yea they will give you the all around like oh we have to open everything up yadayadayada

[@alyssamadrid2769]

Crystal Slayforthegawds k

[@lamontwallace4323]

They are trying to charge me 1k to do mine... I'm about to go get my car back right now!

[@nicolesurface2717]

Thank you! Doing it with one hand awesomeness! Seems easy enough!

[@Andre-lm8ld]

I like that he did this entire video one-handed. Woof.

[@kingzoe791]

THANK YOU SO MUCH. THIS VIDEO WAS KEY TO REPLACING THE FUEL PUMP IN MY 2005 DODGE MAGNUM. YOU SAVE ME MORE THAN $300. 😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆

[@jaylovinpoo7582]

Is there a tool you can use to get the lock off its super hard & wont come off

[@keithanjones5253]

Thank you for this video god bless you an happy thanksgiving you saved me I did the work myself again god bless you!!

[@jackmeyers2911]

Keithan Jones thank you and same to you!

[@shonpieters9609]

Hopefully your video will save me hundreds of dollars

[@karenthrower7457]

Thanks! You made something scary to do by myself easy as can be! I appreciate ya much, Sir!

[@FeLLoNeY]

That’s a fact I kept procrastinating because I heard people talking about if u spilled gas in the car u would always smell it so for 3 months i didn’t mess with it i though about taking it to a shop then I heard 550 $ huh 🤔 !!! Saw this video never changed a fuel pump before ever and I did it perfectly because of this video car cranked right up and has been driving like a new Chrysler 300 💪🏽 !!!

[@babak1969van]

Great video. I did the same thing now I get P2068 code and my gas level is all over the place. I used SPI now I’m switching to Delphi. Hope it works

[@jackmeyers2911]

It should. Make sure that the hose to the secondary pump doesn't get stuck around the float. Sometimes it will and make the guage go out of whack. Its probably the sender that's faulty. Cant go wrong with delphi though.

[@ryancalloway2371]

Did you ever figure out what the issue was with that code same thing is happening to me now

[@TriangleSquare52]

hey i noticed that you didn't use a brass punch when you got the locking washer off of the orifice...isn't that dangerous? your steel screwdriver could spark and ignite any fumes around

[@jackmeyers2911]

Chan I suppose you're right. I and all the other techs I've ever worked with do it this way for 20 years now. The tank is sealed until you break the ring lose.not many fumes .you can try brass for safety.it's not a bad idea. I have a couple times but the rings on most of today's tanks will just laugh at a brass punch and you will be there forever. I'm all for safety and think it is a good idea for anyone watching this video to be safe and use brass. I do things from my own personal experience but thank you for pointing that out to the viewers.

[@chefshan7]

Screwdrivers have plastic handles so you're not banging metal on metal

[@nosuchluck9477]

@@chefshan7 They're talking about the blade of the screwdriver hitting the retaining ring and sparking. Has nothing to do with the handle.

[@satochinakamoto6129]

5 years I'm commenting in 2023 .. Dude they actually make a special tool for the lock run in Chryslers fuel pump to loosen the lock ring. You put a breaker bar in the middle. It's like $209.00 tool few years back plus tax. Who knows what the price of the tool is today.

[@kingzoe791]

THANK YOU SO MUCH. THIS VIDEO WAS KEY TO REPLACING THE FUEL PUMP IN MY 2005 DODGE MAGNUM. YOU SAVE ME MORE THAN $300.

[@shaquillecoleman5112]

great video huge help and saved hundreds

[@jackmeyers2911]

Shaquille Coleman thank you!

[@shaquillecoleman5112]

would u suggest changing the sending unit to can it mess up the fuel pump only changing the pump?

[@chriscordova5343]

Did this in 10 min thanks to this vid 💪🏼

[@jessiemoore1849]

Struggling with the one hand but overall great video man lmao

[@JohnDoe-px6fz]

I'm going to put this out there. I bought a new pump. put it in. didn't work. I got 12 volts at the harness. The new pumps are wired differently. Nowhere in the instructions did it tell me to switch the wires. The two bigger wires go to the pump. They are side by side originally. You need to snip the second one and the third one. So number two has to go to three and three goes to two. Tie them together. I can't remember but on the harness there are numbers that correspond with the wires. It may be number four switched with number three.

[@danhall2197]

You can use the pump top from the bad pump if the factory wiring harness doesn't seat/connect fully on the new pump top.That does happen sometimes depending on pump manfacturer.

[@zooker7507]

I wonder if anyone can comment on how the fuel pump went out? Did you notice hesitation or something first and then it when out months later, or did it just die and leave you stranded on the side of the road? Really curious to know as many peoples experience with it as possible. Thanks

[@Strangedream]

It started off by refusing to start sporadically, then it would start if you hit the fuel pump with a hammer but that only worked one time. The next time I started the car, I backed it halfway out of the driveway and it stalled and wouldn’t start again until I replaced the fuel pump. Hope that helps.

[@yshahadah]

Awesome video. You are the best!!!

[@lfuentez3]

Thanks for the vid. Saved me a lot

[@aftabnuraney504]

You make it look so damn easy so I tried it myself. The metal ring was the only hard part. Took about 40 minutes to bang this loose but the rest took about 20 so all in was only an hour. I had no prior experience but I thought if you could do it one handed I've gotta be able to pull it off. Very impressed by your skills! BTW I did this job outside in the rain and only secured the metal ring. I have to wait for a sunny day to get this back to locked position. Is there a secret or do I simply have to keep banging away till it finally pops into place?

[@jackmeyers2911]

Aftab Nuraney thanks I usually just keep tapping it until it locks. It can be a pain sometimes.

[@porshahelms8366]

Or you can buy the special tool to help

[@Anotherdaynparadise]

I did this job with a delphi pump today on this same year & model car. Just when i thought i was done the car didnt start and the new pump was not coming on. I was pissed. At that moment i realized what those butt connectors and plug that came with the pump were probably for. I had to cut the plug from the factory harness and splice the wires onto the delphi plug but in a different order than the order they were in on the factory plug. Hilarious delphi joke.

[@beaustephens438]

Thanks to you i fixed mine

[@storkman]

thanks Jack appreciate it, I'm gonna have to do this soon.

[@jackmeyers2911]

storkman thanks. Hope it helps!

[@ersanchez805]

i have an 07 charger and my passenger side pump makes like a ticking noise. as it gets faster the rpms drop and then go back to normal and my car turned off on me twice before. so is it the passenger side or main pump thats going out?

[@jaredshowers1]

Hey jack! Awesome vid! Do you have a vid on changing the fuel leak detection pump? Or know where it's? I have an 06 300c 5.7. Not finding anything on it. Appreciate it!!

[@jackmeyers2911]

Jared Showers still need it? I can get you the info asap. Sorry been super busy this week

[@edwinhayes8611]

Last night our 2005 chy 300 stop, got lights, spark, fuel, is there a relay or fuse box to check?

[@rottyready63]

Be careful guys. Do not mistake this video for working with a 2004 300m. No access port under the seat. Tank must be dropped.

[@christopherponce1467]

When i removed mine. The tank tank was over filled and gas poured out, why is that?

[@kc6442]

great video. but did anyone else find themselves "#MovinSideToSide" tryn to help him get that pump into place lol 👀

[@imcybilla]

Paid a guy to watch your video as he changed mine 😏😂😂😂

[@dou8letap82]

Is this the same for 2007 300c with a hemi?? Thanks for the vid!!

[@GB97able]

Can someone help those fuel lines inside the tank broke including wiring on my old 300 I can’t find parts or how to be replace

[@drezzy28379]

Did anyone do this to a 2010 Chrysler 300 touring 3.5L V6? Is it a truly solid video? I want to replace my fuel pump and I just want to be sure.

[@midimoog]

Is that gasoline in there? Is it safe to do this?

[@bigboiiobbig4115]

Great job with the video

[@gunsandclips]

will this be the same on a 07 charger?

[@rodguinn7237]

What does it mean if there is gas on top of the fuel pump. It is the driver side fuel pump in a 2012 dodge charger

[@wicked8139]

Just got a code on my 06 p2067 does that code mean changing the fuel pump can help sovle it?

[@satochinakamoto6129]

Excellent video.

[@gamermasta525]

How do you know which side is the problem??

[@BinkyDoinkus]

My brothers '06 300 hemi c made it to the store but when he came out to start it it would run for like 2 seconds then die. I made sure connections were ok and all that first. And checked the fuses and relays. Everything was ok. Then I decided to take the air intake off and spray starting fluid into the throttle body, and it would run as long as I kept spraying it. So clearly it wasnt getting fuel. Replaced the fuel pump thabks to this video. And it runs good as new. The other pump might need replaced too. PS. WHY THE FVCK DO THESE CARS HAVE 2 FUEL PUMPS. ITS NOT LIKE THEY HAVE 2 FUEL TANKS...

[@danhall2197]

The other pump is a transfer pump because the uneven mounting of the gas tank.

[@peterlaskov5954]

where you buy new one becouse i need one for my 300c turbo diesel with mercedes engine v6 3,0 160 kw

[@uhmeizuhngralphf0549]

Why did you change your fuel pump was it taking too long to start and where you got the fuel pump from was brand you have how much you pay for it there are like 4 different brand of the same pump I don't know which one to buy.

[@mrmetalchip74]

Jeff Wyler in springfield ohio wanted just under 900 for this repair. crooks! yeah they need to make something but they were 300 higher than the second highest and 500 over the lowest. yes we did it ourselves in under a half hour

[@Jeffmd2020]

What year is this 300? And is this process the exact same way on ALL 300’s of this body style no matter what engine it has?

[@mosthated8190]

From 2005 to 2010

[@damonicaolivarez2282]

How do you know which one it is exactly

[@nashekasanders]

My car stalled out and my fuel pump making a crazy noise and it won’t stay started . It’s gas in it but it won’t start. I have a 05 Chrysler 300c

[@averykelley6204]

hey I just changed the upper intake manifold on my 2006 charger 3.5. and went to start it up and would only start once i sprayed starter fluid and then cut off ....do I have 2 pumps and which one should I change?

[@jackmeyers2911]

Avery Kelley if it won't run its always the main pump on the drivers side. It is strange that it won't start after changing the manifold. I would make sure to check the voltage at the pump to make sure it's getting power before spending all that money on a pump.

[@averykelley6204]

Jack Meyers thanks will do..it has been sitting for a while ..got fuel pump codes first ..now getting some other. codes today..123, 222 and 211...got me thrown all off. I will investigate more before I do anything else

[@jonfrausto1541]

​@@averykelley6204 what was the results of the other codes being present

[@602_eddiee]

Does this process work for srt8 models? Thanks

[@PHYLLISBLACKWEL]

I can not get the black metal plate off the pump help please

[@ricgomez1]

doesn't this vehicle have two fuel pumps? if so which is the primary pump? or do I need to replace both?

[@danhall2197]

The other pump on the passenger side is a transfer pump.The tank has an irregular mounting(not level) hence the the need for two pumps. However 99.5% of the time the drivers side goes bad.

[@ricgomez1]

@@danhall2197 Well thanks. I fixed it quite awhile ago, it was the primary fuel pump

[@angelesflor6911]

Quick question, I had to replace my seal in a 06 charger. And the top white lid doesn't close completely. Would I have to take the gas out and do it without gas or what? Help!!

[@raymondgracia4525]

Yes u should’ve dumped out a little

[@b4ndd545]

Thank you so much man

[@drerob7648]

The metal ring won’t come off on mine

[@semihyilmaz4699]

DO YOU KNOW IF THE FUEL LEVEL SENSOR IS ATTACHED TO THE PUMP ASSEMBLY?

[@danhall2197]

Attached to the pump assembly is a float device that sends a electrical signal to the computer/gas gauge read out.

[@semihyilmaz4699]

@@danhall2197 Thank you 🙏

[@makebelieverOrBeliev]

Hey jack...i have a 2007, 2.7l...& its idling extremely rough...even as i drive. my check engine iight is on. sometimes the check engine lite blinks off & on...does this sound like i need 2 replace my pump❓❓❓how can i know 4 sure❓❓❓ how can i pinpoint the problem❓❓❓thank u in advance 4 any aid & assistance u can offer

[@michaelmcallister711]

You can go to Autozone to ask for a code Readout and it'll tell you which area to focus

[@etwertfutiouio4545]

same issue but no codes

[@Fordforeva1988]

Sounds like a random misfire u need a tune up or have a coolant or head gasket issue

[@JC-vk7ud]

yo, thnx, perfect vid

[@had3e3]

What year is this chrysler?

[@brothareddi]

Hey I have an 06 Chrysler 300C. It’s a strong fuel smell when I pump more than half in my tank. Why do you think that is?? Do I need to replace the pump??? Thanks in advance

[@jackmeyers2911]

mario redd check the top of the pump. Just take the seat out and cover over the pump. I've seen them crack and small amounts of fuel sit on the top of the tank. That's where I would look first.

[@TheMastadon1]

I have this exact issue. Did you ever find out what it was? I'm about to replace my whole damn emissions system and check every single hose on this car. It's driving me crazy not being able to put more than 2/3 of a tank without a strong gasoline smell in the cabin.

[@stanalfano2732]

Thanks

[@rsgreenwade]

Would cranking but not starting indicate a fuel pump issue? Just started today.

[@jackmeyers2911]

iTz_Chez its possible. Hard to say without seeing the car . Did it die suddenly? Or did you come out to start it and nothing?

[@rsgreenwade]

Jack Meyers it was starting and turning off after a couple of seconds. Now, it's just cranking and not starting.

[@jackmeyers2911]

iTz_Chez does the little red security dot on your dash shut off?

[@rsgreenwade]

Jack Meyers the fuel pump wasn't working at all. I put a new one (fuel pump) in and the car started. Thanks for your help man!

[@rmadrigalb]

Jack Meyers hey jack. Awesome video. You are great. Please let me ask you. What is that red dot in the dash. Also has like a red rthunderbolt? What is that? Thank you brother. God bless you for your help

[@darrininverarity4297]

No smoking while doing this job.

[@cypeters1]

CAN NOT BELIEVE ITS RIGHT UNDER THE SEAT!!!

[@burtthebeast4239]

Thanks brother....

[@elritmoysaboracosta2874]

Excelenten good 👍

[@monstroso3879]

How can you tell if there bad?

[@johnsalazard6659]

if the car struggles to start, or doesnt start at all, sometimes, the engine will stop suddenly

[@minecape]

what year is this car

[@jackmeyers2911]

I believe a 2011 I have to go back to my work order to be sure.

[@JesusGonzalez-lt9mi]

good

[@19toke]

Can i follow same steps for a chrysler 300m 2002

[@brianstechtips5721]

No. You have to drop the tank

[@etwertfutiouio4545]

works for a 10' dodge charger ?

[@jackmeyers2911]

Xavious Castro should be the same

[@thesuper6flowllc]

Mine runs just the check engine light is on could this be the sensor

[@jamesholloway4755]

Did the same as this video and it works but now the gas gage keeps going up and down and one know why?

[@rex2race]

James Holloway fuel sending unit going bad or re check all ur connections and tubes on ur pump

[@carinaortiz100]

rex2race what is the sending unit. I changed my fuel pump out and since then my gauge is going up and down.

[@emccoy123456]

Carina Ortiz did you find out the problem cause I changed mine and it's doing the same thing

[@huntercarrigan1854]

This cost me 500 dollars ? To replace lol

[@pocomoke1]

So I did everything right. Now I have no power to the car. It's like the battery is draining. Everything was fine before I changed the pump.

[@HIMI2003]

they have two fuel pumps,😱

[@TriangleSquare52]

no, sending unit regulator on passenger side pump/float module - driver side

[@MarcyMckeefer]

Which one has the filter in it!?

[@salvadorsamora137]

Crazy how u Reed where people start the pumps on fire at the gas station cuz those dam cellphone's

[@TripleDTwerkers]

Does the battery needs to be unhooked before doing this ?

[@TheMastadon1]

Lol yes. Better safe than sorry.

[@kingzoe791]

THANK YOU SO MUCH. THIS VIDEO WAS KEY TO REPLACING THE FUEL PUMP IN MY 2005 DODGE MAGNUM YOU SAVE ME MORE THAN $300.

[@kingzoe791]

THANK YOU SO MUCH. THIS VIDEO WAS KEY TO REPLACING THE FUEL PUMP IN MY 2005 DODGE MAGNUM. YOU SAVE ME MORE THAN $300. 😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆

[@PHYLLISBLACKWEL]

maxi muffler is wanting to charge me 703.00 for this whattttt

[@uhmeizuhngralphf0549]

Why did you change your fuel pump was it taking too long to start and where you got the fuel pump from was brand you have how much you pay for it there are like 4 different brand of the same pump I don't know which one to buy.

[@markcope4284]

I cant get my pump back in it doesnt go in far enough to get lock ring on the top of the pump seems too big for the hole and i cant push it flat onto o ring i cant figure out what im doing wrong

[@jackmeyers2911]

Mark Cope make sure the notch is aligned with the tank and try the original o ring. Sometimes the aftermarket ones are out of spec and cause trouble.

[@markcope4284]

Jack Meyers im just trying to put old pump back in found out the pump is working just not getting power i put the tab facing front of vehicle and no matter what i do it wont sit flat on top of the tank

[@havic0327]

Thanks

[@kingzoe791]

THANK YOU SO MUCH. THIS VIDEO WAS KEY TO REPLACING THE FUEL PUMP IN MY 2005 DODGE MAGNUM. YOU SAVE ME MORE THAN $300. 😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆😆

[@MartellC.]

Car shop wanted $750 for this. Laughed in their face. Went home and did it myself in 30 minutes for less than $150. Thank you!

[@Jujuandpaw]

Thank you! The shop wanted $750. After watching this, I bought the pump, relay, and lock ring tool for $200 and did it myself in about 15 minutes. Saved $550! Thanks again!

[@ravenbenjamin2254]

Where did you by the items at for that price?

[@Jujuandpaw]

@@ravenbenjamin2254 the pump and relay I bought from an auto parts store close to the house and the lock ring tool i got off of Amazon. Literally took me 15 minutes from start to finish. Easy.

[@timothysowell8894]

0

[@JAS_392SRT]

My car starts when cold started but after I shut off it's hard to start up again I have to hit the pedal to get it going. Would this be a fuel pump issue

[@matthewfields-stone1228]

Jas B more than likely yes. Fuel pump is going out. Fuel pump is not pumping fuel to the engine Consistently

[@JAS_392SRT]

@@matthewfields-stone1228 thanks g

[@geralda9119]

I can’t get pass the ring smh

[@Roars270]

Simple job but I’m having a hard time getting the pump to seat all the way into its slot. Can’t get the lock ring back on 🤷🏻‍♂️

[@gerardoesparza8768]

Is this the same for 06 chrysler 300 2.7L