CHRYSLER 300S SRT DIFFUSER/VALANCE UPGRADE PART 2

[@CaptINSANO]

Came across this video in my recommended feed. There are a ton of 300 groups on facebook, sharing your page and upgrades there will not only help other people but get you some subs. I just subbed!

[@lalogarage6686]

Thank you appreciate it 🤙🏼💯 let me know if a specific mod would help out and ill do it

[@AngelRodriguez-xc2dc]

Where did you get the diffuser from?

[@DavidCuervo-v4m]

Donde lo compraste?

[@manvirphull67]

What size exhaust tips are you using? And what exhaust setup are you using?

[@mistadee5381]

This video helped me!! Just finished mine today!!

[@Swole55_]

Im about to do the same install on my 300s. Thanks for the detailed video. I see that we are in the same general area, if you still have your 300 maybe we can pull up.🤝

[@lalogarage6686]

Still got it ill try to do an update video on it soon 🤙🏼

[@tboylyons1]

Do you have to remove the bumper to change it

[@federiconegretejr.2955]

Did you replace the two rivots on each side that you had to cut off?

[@johnbrownlee7623]

why no carbon fiber?.........How long did it take?

[@denismanace]

Such a mellow voice.

[@becca_adam]

Curious. What clamps did u end up goin with also. Did u leave the stock exhaust on. I really dont wanna cut mine off.

[@ceelous]

Good video bro but drop where u got that diffuser

[@blackice7408]

Get some dark tinted full led side marker lights. It will really make your car pop at night

[@lalogarage6686]

Will do 🤙🏼

[@MrAxelStone]

FINALLY...a good video that shows you how to replace the rear valance from start to finish! Thanks!! I have a '22 I just picked up and I'm a little worried about taking my back bumper off. When you put yours back on, did it line right back up exactly as it was before you took the bumper off? I'm afraid it wont go back on right, the lines wont match or something and will piss me off every time I look at it lol. Also, once you switched from the original exhaust tips to the open cutout, does the pipe line up correctly with the new cutout where you just need to pop the tips on and clamp? Also, do you HAVE to drill out the old exhaust tips if you're just takign the valance off anyway? Why did you need to drill out the holes and pull out the old tips? Thanks again!

[@CAAARRRLL]

Did the valance come with replacement rivets or did you just buy some with it

[@lalogarage6686]

The rivets are for the old exhaust tips that you wont need

[@CAAARRRLL]

@@lalogarage6686 oh awesome thanks

[@ThrowDaws]

Where did you get the tips from? What size inlet/outlet were they?

[@lalogarage6686]

Upower Pack of 2 Exhaust Tip 2.5 Inch Inlet 4" Outlet 9" Long Double Wall Slant Cut 304 Stainless Steel 2.5 inch/OD: 4"/ Length: 9" www.amazon.com/dp/B074GQCSGM/ref=cm_sw_r_cp_api_i_OaHjFb33BKXHA

[@ThrowDaws]

Lalo2294 I have an exhaust system on my 300 and a 2.25 inlet where the exhaust ends. Do you think those will fit? Or does it have to be 2.5 inlet?

[@lalogarage6686]

They will fit, you will just need to take it to a muffler shop so they can weld them on, I had the same 2.25 inlet on my exhaust end, these tips make you car sound way smoother

[@ThrowDaws]

Lalo2294 damn really? Yeah I really want some nice tips but I didn’t know if they would fit since I have 2.25 and they are 2.5. That’s dope.

[@jayyyhammm]

bdaws they can weld the size difference on. You can do 3” inlet and 5” tips. I will have that done within 3 weeks.

[@pharoahmonk50]

Good install video!

[@Billydafisha]

Did the diffuser come gloss? Bc the website shows matter

[@danielthreeothree6240]

How much did you pay to get your diffuser painted?

[@iamvinc3official]

Jeff dahmer ?

[@anthonywilliams5224]

What kind of exhaust and muffler you have

[@SmokeyES350]

Did the diffuser come gloss black? Or did you paint it or have someone paint it?

[@lalogarage6686]

I had someone paint it came textured

[@SilkCityOG]

What size clamps did you end up getting??? Are you V8 or V6

[@lalogarage6686]

I just went to a shop and had them weld it on, I am on a v6

[@SilkCityOG]

@@lalogarage6686 cool. I'm about to get that same defuser and I clicked the link for the tips. Did they weld the tips on the muffler or on the pipe? I'm trying to figure out because I'm using clamps until I get a cat back exhaust.

[@SilkCityOG]

@@lalogarage6686 What's up bro. Hey did the muffler shop do weld the tips on your rear mufflers or did you do a rear muffler delete?

[@asey9508]

Great paint job! Great install too! Your content is appreciated, doing this same install on my 2015 C.

[@becca_adam]

What orher than tips dis u do to ur exhaust.

[@sanj5026]

Where do you buy?

[@nathanmoore5010]

I'm looking for the same thing to mine. What is the part number if you dont mind.

[@terrymitchell4579]

What sizs inlet, outlet is the exhaust tips?

[@superbaddz5873]

what power drill do you use? link please

[@mustafakamil8711]

Looks good, where you got those exhaust tips from and the diffuser

[@lalogarage6686]

Upower Pack of 2 Exhaust Tip 2.5 Inch Inlet 4" Outlet 9" Long Double Wall Slant Cut 304 Stainless Steel 2.5 inch/OD: 4"/ Length: 9" www.amazon.com/dp/B074GQCSGM/ref=cm_sw_r_cp_api_glc_fabc_F-8.FbNMHN92G?_encoding=UTF8&psc=1

[@mustafakamil8711]

@@lalogarage6686 thank you sir , what about the diffuser?

[@lalogarage6686]

www.moparpartsoverstock.com/p/Chrysler_2019_300-S-36L-V6/PANEL-Rear-Fascia-Valance-Rear-Fascias-Parts-Module/10694343/68225384AB.html

[@mustafakamil8711]

@@lalogarage6686 you’re the man I have been searching for this for a long time

[@jayyyhammm]

What did you do to the exhaust? Rear resonator delete?

[@lalogarage6686]

Yes just that and put on those tips which gave it a nice sound

[@kelvinfoster1808]

Time for the back badge to go 👍🏻

[@SilkCityOG]

Wut up bro good job! Liked and subscribed 💯

[@chrisholmes2888]

Hey man how do I remove the crome insert that's on the rear bumper I wanna replace it

[@City_Cichlids]

Where can I buy this? Awesome car

[@wangdangparkes]

Looks sweet as brother Just subbed

[@nathangonzales9168]

Or where did you get them ?

[@lalogarage6686]

I got them off amazon they are Upower pack of 2 exhaust Tip 2.5

[@neilufe]

Do you have a link

[@michaeltittle7111]

Sick AF

[@abdulrahmanfahad8618]

Where did you get the glossy black diffuser??

[@lalogarage6686]

I did it on my own besides the painting

[@darkknight300s5]

We're did you get that rear diffuser from an what year did you us

[@lalogarage6686]

Moparpartsoverstock.com 2019

[@bearantoyaable]

Where did you get you diffuser from

[@lalogarage6686]

www.moparpartsoverstock.com/p/Chrysler_2019_300-S-36L-V6/PANEL-Rear-Fascia-Valance-Rear-Fascias-Parts-Module/10694343/68225384AB.html

[@craigtoth9730]

Where you get valance and tips. Need for son's 300

[@lalogarage6686]

www.moparpartsoverstock.com/p/Chrysler_2019_300-S-36L-V6/PANEL-Rear-Fascia-Valance-Rear-Fascias-Parts-Module/10694343/68225384AB.html

[@lalogarage6686]

Upower Pack of 2 Exhaust Tip 2.5 Inch Inlet 4" Outlet 9" Long Double Wall Slant Cut 304 Stainless Steel 2.5 inch/OD: 4"/ Length: 9" www.amazon.com/dp/B074GQCSGM/ref=cm_sw_r_cp_api_glc_fabc_F-8.FbNMHN92G?_encoding=UTF8&psc=1

[@allanbarahona1233]

Do you have the part number for the rear diffuser?

[@lalogarage6686]

www.moparpartsoverstock.com/p/Chrysler_2019_300-S-36L-V6/PANEL-Rear-Fascia-Valance-Rear-Fascias-Parts-Module/10694343/68225384AB.html

[@alexg9131]

@@lalogarage6686 been looking for this forever!! greatly appreciated

[@hakeemsmith447]

Thanks fam I really glad it’s a link for this part , makes the car look way better

[@fadimansour4661]

Can you link the website for the diffuser??

[@lalogarage6686]

Moparpartsoverstock.com

[@shanetroyer2461]

Any way to do it without taking bumper off?

[@lalogarage6686]

Not really way easier if you take it off cause you have to drill out the oem tips

[@loadsofcash628]

@@lalogarage6686 why do you have to drill out the tips

[@Misterdre2you]

Looks good bruh, but you gotta do something with that exhaust now

[@Blackprince48-v2j]

Can't do anything with a v6 🤷🏿‍♂️

[@CAAARRRLL]

@@Blackprince48-v2j solo performance has a pretty nice exhaust system for the v6

[@MelloLoMane]

Tim b exhaust with the different trend flow 2 and res delete. Best sound for the price

[@terrymitchell4579]

Part #

[@nathangonzales9168]

Bro do you have the part number for the tips ?

[@lalogarage6686]

Upower Pack of 2 Exhaust Tip 2.5 Inch Inlet 4" Outlet 9" Long Double Wall Slant Cut 304 Stainless Steel 2.5 inch/OD: 4"/ Length: 9" www.amazon.com/dp/B074GQCSGM/ref=cm_sw_r_cp_api_glc_fabc_F-8.FbNMHN92G?_encoding=UTF8&psc=1

[@adantrigo4916]

Y’all think this will fit an 06 srt8 300c?

[@lalogarage6686]

Not too sure

[@bryanaguilar7110]

Yes it Will bro you just have to screw it on

[@richardcruz2630]

I'll pay you to do mine next 😂😂🤷‍♂️

[@elwerito2731]

badasss

[@rexkoller9645]

Is your car a V8 or a V6

[@yahirmedina3735]

i think it’s v6. v8 models come with rear spoiler matching exterior color

[@ivanguzman4427]

Next time show how to unplug the things cause some of us are beginners

[@Johnny_Utah13]

Are you kidding?? He show everything there is🤦🏻‍♂️

[@ivanguzman4427]

@@Johnny_Utah13 not how to unplug the things

[@PresidentialHD]

How big of a tip could you put in, would a 5 inch fit?

[@MelloLoMane]

Pause

[@anti-owlsociety4388]

Thought this was an srt🧐

[@dannysdailys]

Are you crazy? Now your exhaust will fill up with water every time it rains. Cost me an 850 dollar muffler once. Great engineering GM and Great move Einstein. You did it on purpose. I hope you have nothing parked behind it.

[@CAAARRRLL]

What did he do wrong?

[@lalogarage6686]

?