General Lee: Building my Fastest Mower Yet!!!

[@dougkoerber1889]

This video made me smile

[@chud327]

Love that and thanks so much for watching!!

[@Buddy-ek3n]

Greatest mud mower channel of all time

[@chud327]

I love hearing that and thanks so much for watching!!! Feel free to comment as much as you like!!

[@joshsadventures1776]

Love the long videos! Great to sit back, relax, and enjoy the production. Stuff like this helps relight my passion with mowers when I get burnt out.

[@chud327]

Excellent feedback! And thanks for watching!!

[@J_Beazy223]

I was feeling the same

[@chud327]

@@J_Beazy223 thanks so much, btw, the boy got a cub cadet running yesterday, engine ran good too.

[@ReidMcKinnon]

this is the greatest mud mower channel ever

[@chud327]

Love that and so glad you feel that way!!!! Thanks so much for watching and wait till you see the John Deere I am building, it is getting close!

[@ThatOneGuyIsaac]

agreed

[@Tennesseemountainhomestead]

That race mower came out great Chud, I like how it peels out while it’s already moving down the road. I’m an original Dukes fan from the early 80’s! Love the paint scheme! Call it the General!

[@chud327]

I am an original 80's fan too. I love how it kicks up dirt too!! Tonight on the asphalt it was chirping the tires shifting to second and third. I have been calling it General Lee. Thanks for watching and for the comment!!

[@whitetrashandhellbound6905]

I restored an old 350 Trike a few years ago... Painted her orange and put the General decals on it. Dubbed it the "General Three" lol was a fast little trike. Love the mower, nice job 🤟🇨🇦

[@chud327]

Sounds fast and cool name. Thanks for watching!!

[@chud327]

Dang, I should have called it "The General Free"...

[@williwonti]

Thanks for actually showing the pulley swap

[@chud327]

I try to show every step and that is one of the most important steps. Thanks so much for watching!!

[@ROB_DJOREOYT]

Slicks are directional because of the crumple zone of the tire when you full throttle the tire bends a bit. The more you know

[@chud327]

Makes sense, thanks for watching!!

[@MichaelWilliams-vb6wr]

I watched the LT-1,000 video and was impressed but this video a GENERAL LEE Race mower got a Subscriber out of me you got some good knowledge and real BAD-ASS mowers keep em coming Chud 327

[@chud327]

Thanks so much especially for subscribing!! Thanks again for watching!!

[@knight4linux]

General Lee, i love it. Watched the whole thing. Perfect "dad time" late night watching!

[@chud327]

Thanks so much for watching the whole thing!!

[@tomtruesdale6901]

That mower is FAST. Nice job on it. I could keep the sand rail as VW engines are plentiful and cheap if you keep looking.

[@chud327]

VW engines used to be everywhere where, but I have trouble find them now. I will probably keep and hunt patiently. I’m did find an S-10 engine last Friday. Thanks for watching!!

[@liljoeii6091]

Your General Lee is fast awesome job and THANK YOU FOR THE VIDEO

[@chud327]

Thanks and thanks so much for watching!

[@coalcr1]

I'm glad you posted this video I've been swapping my hydro trans to a 6speed and doing a pulley swap and couldn't figure out how or where to me over the clutch. Thanks for unintentionally telling me where to put the clutch lol. Now I have to figure out how I'm getting the trans linkage hooked up. 😂👍🏻

[@chud327]

No problem and good luck with your build!! Thanks for watching!!

[@DanPainter-xr6ct]

First mower brother and I found in trash and pushed home 2 miles and we were 11-12 and gear heads since I remember first go kart 40$ with 3hp blown motor and went to 12 hp snowblower engine and so on and I am 40 now and still love this stuff locally owned scrap yard let me buy material and parts for scrap price and you don’t always have to pay a lot and sometimes you have other things that need paid first To all young engineers and inventors don’t give up

[@chud327]

Very cool and great advice!! Thanks for watching!!

[@Dr.Reason]

Not from the south, I’ve never gotten into all the lawnmower racing videos… but this one intrigues me finally. Great walkthrough video. Fun project. But I bet you don’t have much time left for video games. LOL. I can see how this could be a blast with lots of guys doing this to race together. Fun.

[@chud327]

Love riding with friends and no time for video games at all… thanks for watching!!

[@miles7267]

I'm going to get my first mower for racing in a few days! This is very neat!

[@chud327]

Be careful if you make it too fast, good luck and thanks for watching!!

[@miles7267]

@chud327 man I'm struggling to make it run let alone make it fast 😂

[@reesemolloy6109]

Btw to lower the rear flip the transaxle brackets upside down and mount the transaxle upside down it really lowers it

[@chud327]

May try that some day and thanks for watching!!

[@wilkersonsmowershop8379]

Great vid chud. Love how the build was mostly junkyard parts and new old stock.

[@chud327]

Me too, make it so much cheaper. Thanks for watching!!

[@machine81hood99]

Id love to see one of the older s10s like yours with the 4.2 liter straight six vortech engine. I love the v8 swaps but after having a 4.2 straight 6 i can tell you they are strong

[@chud327]

That would be cool and would be so different too. Thanks for watching.

[@TimmoDukes]

Painting while it's raining, ain't bad as all to me. I've done it plenty of times.. I've seen that I get less trash in the paint. Probably because the rain is keeping down the dust and the little flying bugs.

[@chud327]

Good point, it wants to rain every other time I paint and thanks for watching!!

[@knowbs2122]

Love the saftey flip flops , elbow sheilds , and nut saver , keep it up , great channel

[@chud327]

Thanks 👍 and thanks for watching.

[@jheetman]

Some slicks are directional and some aren't. The directional ones are engineered to have torque transmitted through them. The sidewall braiding is arranged so that it tightens up or "preloads" under torque load, if installed backwards it will lose that preload and the sidewall will get looser. If slicks are made to be non-powered they are non-directional as far as I know.

[@chud327]

Very cool info and thanks for watching.

[@El_Chompo]

Awesome job! I've always wanted to build a fast mower. There is a dead one in my woods that just needs an engine. Someday...

[@chud327]

They are a blast and thanks for watching!!

[@larryhogan3-16]

That's a awesome going to town rig you just built 💪 👍

[@chud327]

Thanks so much and thanks for watching.

[@bradfordjones71]

That ex-mower is pretty sweet brother. Love the color. Great work!

[@chud327]

Thanks so much and thanks for watching!

[@stoffel6348]

Nice work! I have a 21hp craftsman with a bad deck but the motor is fine... getting ideas! Thanks for the video and good luck with your next project!

[@chud327]

Thanks so much and good luck to you too! Thanks for watching!!

[@ussdiscovery6912]

Call it "Secret Agent Orange"! Man I gotta build me a fast mower! Hopefully I'll get to build one this summer. Like how you did the hood blacking out the headlights was brilliant! Just need the horn now! LOL 😂

[@chud327]

Thanks so much and the horn would be cool!! Thanks for watching!

[@ClintsStreetMachines]

I love this build. Very inspirational. Thanks CHUD!

[@chud327]

Glad you like it, but I need you to come do a top speed run for me, I am scared... Thanks for watching!!

[@ClintsStreetMachines]

@@chud327 me 2!!!!!

[@drchan5893]

Great video sir, thats one farst lawn mower. It would look so funny cutting the grass at full speed.

[@chud327]

Yes and that would be funny. thanks for watching.

[@J_Beazy223]

Awesome video! That is definitely a fast mower. Nice clutch set up. Would be really nice to have a throttle pedal on the general lee..Im working on the white blue tractor too. Will be dropping the video when i get back into town from my grandmas in Tennessee. The v twin is in and im working on the clutch set up. Had to come up with something weird!

[@chud327]

Will be watching for it. Thanks for watching!!

[@jongeddes09]

Often, a drag slick doesnt really matter direction until they're used and they get traction for the first time. Im guessing the tires had direction arrows so that the end user simply didnt forget which way they had them rotating once installed.

[@chud327]

I was kinda thinking that might be a factor and thanks for watching!!

[@bazilwreckerloughead]

I love that mower, I think the name General Lee suits it. I think you should put the dune buggy on the back burner & do the S10 first.

[@chud327]

I like general lee also. Agreed on the S-10 vs dune buggy. Good news, I picked up and engine for the S-10 last Friday… things can start happening now!! Thanks for watching!!

[@Lonniell95]

Thanks for the shout out!

[@chud327]

Welcome and thanks for watching!!

[@cjmusic21]

You should make a dragster out of a lawn mower. Great video btw 🎉

[@chud327]

Good idea and thanks so much for watching!!

[@CobosDoesItAll]

​@chud327 what mower would you suggest for a first timer to pulley swap?

[@yeahbuddy-zh7ox]

Hey chud I have another Idea for a 4x4 lawnmower. The Idea is that you get rear transaxles and mount them on a pivot on the front and have a double stack pulley go to them and connect the steering. You will probably have to shorten the transaxle shafts on the side that is not on wheels. That's my Idea hope it helps!

[@russellloomis4376]

Im just asking because i really don't know. So don't take offense. Will YT demonetize your video if you put the Southern flag on it? Thank you.

[@chud327]

Probably so and thanks for watching!!

[@Swfmco.]

@@chud327 you stole my idea I was gonna make a general Lee raising lawnmower two days ago 😂 😅

[@chud327]

@@Swfmco. do it man, there were many made in real life… thanks for watching!!

[@Swfmco.]

@@chud327 yep 👍 thanks man

[@whitetrashandhellbound6905]

No KZbin won't because it's not a "Racist Flag"... if your going to call the "Confederate Flag" racist, you will have to call the "American Flag" racist. It's the same flag 😂 ... it's people that make this Flag Racist by running their Uneducated Mouths about shit they don't understand. Do yourself a favor and do some Historical Research and you tell me if it's Racist or not. Stop believing everything you see online, it rots your brain... if you repeat what an Idiot Says, that makes you a ... well, you know what it makes you 😂🤟🇨🇦

[@onestopfabshop3224]

That thing is COOL!

[@chud327]

Thanks so much and thanks for watching.

[@Big88Country]

I'd call the it the "Little Lee". Awesome content!! New Sub!

[@chud327]

That is a cute name and thanks for watching and especially for subbing!!

[@Mudmower]

I like that you did good job

[@chud327]

Thanks so much and thanks for watching!!

[@danlecates7656]

General Lee is perfect for the race mower

[@chud327]

I agree and thanks so much, I already have people wanting to buy it from me... thanks for watching.

[@joedirt5378]

That’s a fast ass lawnmower, dear God well guess I know what I’m doing in my lawnmower during the fall

[@DerekGraham777]

Well i just subscribed. Cool channel man. Im from Goderich Ontario Canada

[@chud327]

Thanks so much and very cool!!!

[@MichaelWilliams-vb6wr]

"DAMN" ole GENERAL LEE was spitting fire 🔥 balls 💣 out the exhaust thats one Bad mamma Jamma the cat was cool 😎 but the girl taking pictures with the mower made it that much better 😂😂 Daisy 🌼 needs to be in more videos might get a million likes with a face like that 😂

[@chud327]

Thanks so much and I will tell her. Thanks for watching!!

[@GeorgiaRidgerunner]

chud man get yourself one of those harbor freight mini tire changers once youfigure out how to use it it makes changing mower tires super easy and a lot faster and less frostration i bought one and havent regretted it not one bit after i learned how to use it

[@chud327]

I will look into that, I love easy!! Thanks for watching!!

[@GeorgiaRidgerunner]

@@chud327 i have videos on my channel of tire changer beimg used

[@nickpellegrin]

Nice budget work as always.

[@chud327]

I think it was $27 dollars for the whole build not counting $7 for the orange paint. Thanks for watching !!

[@Lonniell95]

I love those murry seats tuff as could be

[@M_Track]

Meh

[@chud327]

They are super tough, thanks for watching!!

[@bigc7t]

Awesome stuff, thanks

[@chud327]

Thanks so much and thanks for watching.

[@Dan.Parker]

Wholesome content thanks friend

[@chud327]

You are welcome and thanks so much for watching!!

[@Lonniell95]

I seen someone put a pully so big on there mower the sides of the frame were the belts guard... you have to take pully off to change belt

[@chud327]

That is big... Thanks for watching!

[@Lynn-ww7lh]

Loved the video I need to make a fast mower now

[@chud327]

Thanks so much, maybe not as fast as this one. I have even done a top speed run yet… thanks for watching!!

[@greendragonfly4831]

My first was a 1970s Wheelhorse rider with an Arctic Cat 700 liquid cooled. I don't know how I survived but Vermont was a lawless land in the 90s.

[@chud327]

Sounds sweet and glad you made it. Thanks for watching!!

[@greendragonfly4831]

@@chud327 thanks for posting. Honestly if I saw 14 year old me doing 50-60mph cable brake drifts again I'd need to have a bit of a nap. Y'all got any good mountain coasters? That's my latest safe thrill.

[@black99rt]

​@@greendragonfly4831 I left the track on a mountain coaster from tucking to go faster. I'm talking about the ones that roll in a banked / concave track and the cart is not retained.

[@greendragonfly4831]

@@black99rt ooooooof 🤘🏆💀

[@Connerbaker3621]

I can't wait to watch it

[@chud327]

Love that and will be very soon now!!

[@lastviper-j7y]

One trick I used on my craftman was flipped my front axel up side down and lowered my axel mounts to the lower hole dropped it 7 up front mega rake like my photo

[@chud327]

I should try it and thanks for watching!!

[@lastviper-j7y]

@chud327 may need to lengthen steering rod , but you will still have articulation up front allowing you to keep normal size tires

[@chud327]

@@lastviper-j7y I need to try it someday

[@just-in-time6069]

Use di this as teenagers had one that did 60+ but the stock steering u cant keep it in one lane but when used to race use to drill pully and tape a scrub screw for added strength so the key way had les stress on it built some even did on that had rear steer made a 4x4 we to were mount to rear to a plate attached to the bolt on axel turned the input on angle like if ure gonna run drive shaft to it made links to attached to were the plate we bolted to original bolt run-through rear and then weld a plate like so we could mount axel with chain and took u joint and made shaft to run to front back and took the motor mounted the shaft faced towards seat under hood and cut slot in chassis down to the sprocket we mounted on bottom never got it fully done with having all the front and rear gears connected to a central point it would of been selected 4x4 with six gears front and back since we use a rear stear mower trans we i was gonna make it independent gears selected for if i wanted to run frunt fast in crawling atleast it was moving were just pre selected the gear and left the clutch on motor do its job it was over size chain clutch for go kart but the 4x4 concept 4 link can be done with mower part some enginuity love to tey to do it again but now 20plus years later built some crazy machine out of mowers and quads little gokart and some dirt bike parts own many bike and quad as kid more then i ever could even count done so many this anything we could use from parts we have lying around we use have my weekend parts just sitting at garage as teens and 20s just build things fun day's

[@chud327]

Sounds fun and yes that steering can be sketchy, especially when I am hold a phone in one hand to check the speed. Thanks for watching!!

[@karldawnlang8936]

Awesome!

[@chud327]

Thanks so much and thanks for watching!!

[@FixNewsPlease]

I paint and number mine like pool balls. This would have had a white circle with a 5 in it. Nice build.

[@Lonniell95]

I love it when they start like that!

[@chud327]

I wish all mine started as good. Thanks for watching!!

[@sleepervega71hill28]

Hello All'!. Are you at the other end of the road from "Hamiltonville farm. ? 😆

[@chud327]

I have never Heard of it so I guess no. Thanks for watching!!

[@richardyoung6496]

I been on building Trail Tractors like a Chud in da Mud, round 35yrs now.. Elon needs you at Space x yesterday lol. I've acquired Many, Many smooth mods from You buddy🙂.. Here is you one back. ( Slot engine bolt wholes on frame . Lol makes belt options a lot more friendly.) I'll subscribe

[@chud327]

Good suggestion and thanks for watching!!

[@stoatrepublic]

I'm sure the yellow VW is called a Sand Rail. Dune Buggy is a fibreglass bucket car.

[@chud327]

Yeah, I use the terms interchangeably. I search for both on marketplace… thanks for watching!!

[@M_Track]

General cut would be a cool name.

[@chud327]

It sure would and thanks for watching!!

[@LaneProductions327]

That thing is sweet! Will it wheelie?

[@chud327]

I am scared to try, but it was pulling the front tires off the ground when shifting on asphalt. Thanks for watching!!

[@Kyle-ev4fk]

pretty cool

[@chud327]

Thanks so much and thanks for all the comment!!

[@LOSTAGAIN-lg6gs]

here for the girl

[@chud327]

Thanks for watching!!

[@clarksgarageofbadhabits6803]

He didn’t love your comment 💀

[@teshuvahemmet3036]

Good job 👍

[@chud327]

Thanks so much and thanks for watching!!

[@Tune.Up.Techie.]

gret mower id love to see youguys lower this

[@chud327]

Lower would be very cool, thanks for watching!!

[@dustinh4175]

My favorite motor for S-10's are 327's probably spendy motors tho.

[@chud327]

Very true and hard to find. Maybe someday... Thanks for watching!!

[@cheegebvvbvvbbhggf8638]

Wow that buggy looks nice hope you get that going soon do you like it

[@chud327]

I was sure when I bought it, but I didn't want to lose it. However, the more I study it, the more I like it. Hope to get it running soon and thanks for watching.

[@cheegebvvbvvbbhggf8638]

@@chud327 you are most welcome anytime I watch your video for a long time and I really love your videos!!!!!!❤❤❤❤

[@oldsouthmike65]

nice

[@chud327]

Thanks so much and thanks for watching.

[@ruben_balea]

Warning: Use extreme caution if you see this guy coming in his mower 😉

[@chud327]

So true and thanks for watching!!

[@Lonniell95]

My first ever mud mower was a ariens

[@chud327]

This is my first ariens, love it so far and thanks for watching!!

[@Huntersprojects]

I’m building one craftsman LT2000 19 opposed twin doing a pulley swap me a couple buddies are building a track hopefully I can make it fast as heck

[@chud327]

Very cool, might wanna were a helmet, sounds like it will be fast. Thanks for watching!!

[@1BG0]

Love this one! I cant seem to find an answer anywhere else so i figured i would ask here. Im not good at pulley swapping and dont have a HUGE budget to make a mud mower/fast mower, is it possible to just swap the front and rear pulleys to make it faster? I heard somewhere else that would work but thought I would ask someone like you. Thanks in advance and once again love the new mower!

[@chud327]

You can, but there will likely be a need to cut and weld to make them work on 99.9 % of mowers. I have videos where you can flop the front pulleys and use the deck pulley as the drive pulley. It doubled the speed the two times I did it. Thanks for watching!!

[@dannyjames7529]

Love the Channel! how do you keep the lawn mower steering stable at that speed?

[@chud327]

It is not very stable, plus I have to drive with one had so I can hold the speedometer app for the camera... It is sketchy... thanks for watching.

[@cheegebvvbvvbbhggf8638]

You know parts John Deere with the really good v-twin motor you should use it when you get a mower with no engine

[@chud327]

IKR, I already have 2 mowers that need an engine, but I haven't made it happen yet. thanks for watching.

[@redneckbryon]

When you do builds like these, do you connect the backfire prevention solonoid on the carburetor?? Personally I do, I definitely don't want fuel destroying my engine. My racing mower, I've been wanting to get it done. All it really needs is electrical and everything checked over to make sure it's tight lubricated and greased, but it's scary fast. It sets maybe 2-Inches or so off the ground. I was told it was banned from tracks for being too fast.

[@chud327]

I leave it hooked up if it works, I cut the plunger off if id doesn't. Many of my machines have gas cut off valves for when they sit. I wanted to lower mine, but didn't get there yet. Mine is scare fast to me, but maybe not as fast as your sounds. Thanks for watching!!

[@yrusonoz5574]

So what do you do with the front spindles and the extra wear and heat from friction that comes with more speed?

[@chud327]

So far it has not been an issue, I would like just keep and eye on it and grease it more often. thanks for watching.

[@joeydepalmer4457]

The dune buggy looks like a custom military dune buggy, just missing the gunner's post

[@chud327]

Now I am thinking army green, but then again, I like the yellow... Thanks for watching!!

[@joeydepalmer4457]

@@chud327 I like the yellow too.But If I had the choice, I say orange

[@donaldjohnson394]

Can you post the link for Craftman Dan channel in Michigan. Thanks😊

[@chud327]

www.youtube.com/@danbabcock5251 , just make sure you tell him I sent you and tell him Chud said thanks for that tag. Thanks for watching.

[@ohdamnitsthatguy60]

Chud327 I can see where you get the gray hair. So Pump or side by side to keep the young men away? oh and YES nice work on the mower. 😃 uhm now that I see the Dune Buggy I say you should flip it, make it worth flipping.

[@chud327]

Good idea and thanks for watching. BTW, I have an automatic

[@ronwilliams2280]

Buggy is cool, keep that-n

[@chud327]

The more I look at it the more I like it... thanks for watching.

[@hanselmanryanjames]

Without any prior knowledge, and without googling it, I'm guessing the slicks are directional because of the way the belts are inside of it. If it has belts?

[@chud327]

That sounds logical to me, thanks for watching!!

[@Maddog61959]

Any videos on the old skool red mower at the end?

[@chud327]

There are several old videos and even a playlist on it. I should do some current updates soon . Thanks for watching!!

[@Maddog61959]

@@chud327 Awesome man been watching you for awhile now im down here in florida and i like to build my own mud mowers and racing mowers, i got a sears rear end and thinking about making a project was gotta find a frame i'll also look for the playlist again was very tired the other night to look but keep up the awesome vids

[@tommyhaynes9157]

I want one !

[@chud327]

Thanks, I need to do a top speed run soon. thanks for watching.

[@joeysimmons2779]

Awesome sauce 40 mph HELLYEAH

[@chud327]

IKR, I bet it will be in the 50's if I get brave enough to take it on the highway... thanks for watching.

[@jay1185]

Hey Chud I love the builds man. I noticed at 16:35 that you also own a Monster Rock 'n' Roller 2. How do you like yours? Have you had to replace the battery yet? 😄 Thanks for sharing the fun!

[@chud327]

Battery seems great still, lasts long long time... I did change the power switch last week, was quick and easy, good as new now. My antenna broke off years ago, blamed on kids, built still pick up stations fine. Love it and thanks for watching!!

[@JerryGoad-y7c]

Give a helmet on,, Into more food there's something when you're racing down the road on that, Mower whatever you wanna call that thing with Holland ass, I love the video you do good work all the way around, I showed mom and dad, Would miss , Stacey, Draw a picture of my dad ,s, Race car if we sent to a pic of it,$$$$$, Of course we would compensate , Miss Stacy for her work.. Love the video God bless all you

[@chud327]

I do need a helmet and thanks for watching!!

[@chud327]

She would draw for you, she loves drawing.

[@vickslab4608]

keep that dune buggy, she's a beauty.

[@chud327]

Thanks, I have dune buggy fever... Thanks for watching!!

[@aprules2]

I've been searching on Google for a while now where do you get pressure washer tubing. All that keeps coming up is the rubber hose

[@chud327]

I find old pressure washer that don’t work any more. You can use the engine on a project and then cut up the cart for exhaust. Usually about 20 bucks on marketplace. Good luck and thanks for watching!!

[@Pou_plushBoiFan]

Hey chud I’m a big big big true fan can you post more about OG polulan I really like the poulan

[@chud327]

I will sure put that on the to-do list, I miss driving it. Thanks for watching!!

[@Pou_plushBoiFan]

Thx So much

[@YT_Maseoh]

My dad had a pulley swapped Murray when I was 5 my dad said I could drive and it went nearly 40mph we still have but it’s been sitting

[@chud327]

That is crazy fast and so cool that you still have it. thanks for watching.

[@tangster6304]

Hi I’m building a mower and have a question about the brakes. On mine it’s all or nothing. Is there a way to make them variable pressure so I don’t lock up the tires? I didn’t have time to watch the whole vid so I’m not sure if you talked about it or not.

[@chud327]

You might could unhook the brakes and move to the deck height lever. Good luck and thanks for watching??

[@TheWadetube]

Put suspension under the seat... and don't forget to weld the doors shut.

[@chud327]

Weld the doors shut, you had me laughing!! Love it and thanks for watching!!

[@backtheblue-------502]

9:02 what is the deere thingy in the background ? Just something you built ? Lol

[@chud327]

That is my lifted off road John Deere wagon. Whole build on my channel. I am currently building a monster John Deere mud mower to pull it with, wide coming soon. thanks for watching.

[@charlesgraham9954]

im building a smaller version of a lawnmower tractor for my 7 year old boy. i bought a used push mower for the engine, im thinking it might not have enough HP. so my question is. do they make performance parts for the smaller engines like 150cc with a vertical shaft? also, thank u for your time making these videos, i know the time it must take in editing.

[@chud327]

I am sure they do, maybe check with gooowersports.com. you are welcome and thanks for watching!!

[@JWyuh]

I have a cub cadet with a hydro and saw your video on hydro mowers not able to go fast. But then I also saw a video of a guy making a hydro mower go fast. I’m just wondering if I’ll blow my transmission on this one or should I manual swap it?

[@chud327]

That is how I was looking at it, if I mess up the hydro then I then have an excuse to manual swap. Then you have a better machine. thanks for watching and good luck with it.

[@dominikschutz6300]

Would be fun with detachable blades :)

[@chud327]

That would be cool and thanks for watching!!

[@Awalk1234]

this is very cool a but quick question since youve built several mowers what is the biggest tires you have put on a mower with a transmission like the general lee mower

[@chud327]

OG Poulan has 27 inch tall tires, they are my tallest, silver built has 11 inch wide, they are my widest on they type rear end. Thanks for watching.

[@Awalk1234]

@@chud327 thx i recently put 25inch tires on my murray with a mild pulley swap and i was wondering how easy it would blow the trans

[@chud327]

@@Awalk1234 idk, I have only busted one. I have 27 inch tires and I was trying to pop wheelies…

[@BobBasshead]

Ditch the dune buggy! Sell it and use the money for the S10. First time I came across your channel. 👍

[@chud327]

That has crossed my mind, but hope I can do both. Thanks for watching!!

[@311g]

Great tempo on the video!

[@chud327]

Sweet, thanks so much and thanks for watching!!