Great video! It’s rare to find a good quality video that tells you what you need and step by step show and tell of how to do it
@lordzob48744 жыл бұрын
Thanks this helped me while I was sitting in the foot well of my car
@NDPerformance213 жыл бұрын
It be like that sometimes💯😂😂
@Passthehatchet110 жыл бұрын
why leave stock seat belts if harnesses will be intalled
@ZackyBr010 жыл бұрын
forreal -_-
@amperformance110 жыл бұрын
State inspection I think
@skiptastic100010 жыл бұрын
because daily driving with 4/5 points is a chore !
@SamOperchuck9 жыл бұрын
Alexander Coburg Accurate.
@TheSaif787 жыл бұрын
Some places it's illegal to drive with a racing harness, and it's required to use the factory seat belt. Which I think is stupid
@greenturbo04202 жыл бұрын
Good vid but why keep the stock seatbelt if your gonna install a harness?
@omgbbqcia9116 жыл бұрын
what about on a car that does not have B-Pillars? i see you list this fist older muscle cars, im just curious as to how it is supposed to be mounted on a hardtop car that doesnt have the middle B-Pillar. i dont see any youtube videos on this channel on installing them in such a vehicle nor can i find instructions online
@dronetimefuntime55324 жыл бұрын
Hi, will this bolt up to a 1988 mustang convertible?
@CipherAuto4 жыл бұрын
Do you have a b-pillar? If you have it, you should be able to mount the harness bar. Please check our website for the vehicle specific bar for your respective vehicle.
@user-uy6zp6ej6s6 жыл бұрын
Will this fit a 370z?
@BuddBoodyBlaster3 жыл бұрын
For future watchers, this is a universal kit, you find the size you need by measuring the space between your b pillars of your car, then follow the video
@luxserpentis9 жыл бұрын
Will it fit my '90 Corolla Sedan?
@Shalashaska0169 жыл бұрын
i understand this is universal. im amazed with the design and size and looking at buying one. However how far do the lower support frame tubes extend out? i read that the harnesses need to be wrapped and secured at no less than a 0 degree angle through the seats and this setting looks really low at a negative angle.
@starkfabrication12309 жыл бұрын
+Shalashaska016 Depends on the setback from seat and whether or not the seat is FIA homologated. FIA states shoulder harnesses must sit in range of no more than 10 degrees above horizontal of shoulder harness holes to no more than 45 degrees below horizontal said holes.
@Shalashaska0169 жыл бұрын
Sorry for the many post. guessing internet issues. So I just got mine it. does it matter if the feet are a bit crooked?
@megasquals9 жыл бұрын
Why no spring washer, don't you want to retain taut in the fitting?
@Mystic_Ninja_6 жыл бұрын
+Cipher Auto i know this is a old video but can a eyelet bot for a harness work for the bottom bolt of the support arm?
@Halsafe8 жыл бұрын
My seat belts connect to the seats bolts, can I still install this or will I have issues?
@brandonpierce81607 жыл бұрын
is it the same way for a 95 civic?
@marcosalazar53393 жыл бұрын
Yea
@mgician238 жыл бұрын
i have a 98 eclipse spyder, would I be able to mount this lower since the seat belt is also mounted lower? i would love some feed back if anyone has done this to a convertible
@Lamboman101610 жыл бұрын
will this fit my 2015 scion tc?? is the harness bar adjustable? like what if it is too short or too long to fit between the seatbelt mount points?
@ianbulado7 жыл бұрын
would this fit on a MK4 2001 VW Golf GTi? please and thank you
@dpvisuals51544 жыл бұрын
Have you guys made a harness bar for the 2+2 Z32 yet?
@CipherAuto4 жыл бұрын
CPA5000HB should fit, but it may need a longer support bar
@CipherAuto4 жыл бұрын
We have not tested one out yet
@MichaelBrown-gn3hk8 жыл бұрын
Im trying to install on a scion frs. My seats hit the 2 bar supporting rods. Is this supposed to happen?
@CipherAuto8 жыл бұрын
Michael, can you send some pictures to us so we can figure out exactly the problem? customerservice@cipherauto.com thanks!
@ModsnRods6 жыл бұрын
Will these harness bars fit a 1979 Malibu?
@tallnrough684 жыл бұрын
Looks way too low of an angle
@Acsmith9988 жыл бұрын
will it fit a Chevy sonic
@LydianKascade79 жыл бұрын
This is neat! I hope this fits on my Veloster!
@LydianKascade79 жыл бұрын
You make some valid points that I hadn't thought of at the time of the comment. Luckily, I haven't gotten it, and from the looks of it, I don't think I will. Thanks for the info!
@skiptastic100010 жыл бұрын
single shear mounting of the rod end to the the cross bar..., should be double shear.
@aimbotsnowman894 Жыл бұрын
thanks for the help : )
@DANIEL-tu6cd6 жыл бұрын
3 threads is gonna save your life??? dont think so
@schizobipolarjoe6 жыл бұрын
glad I'm not the only one that caught that. the dude needs to use longer bolts, and point out harness bars should be used only for autocross and not on the streets.
@Shadow-zs5vz7 жыл бұрын
06 acura rsx type s? anyone
@STACKZzHOUSE3 жыл бұрын
Great Video!!
@wheatback8 жыл бұрын
Can someone still sit in the back?
@CipherAuto8 жыл бұрын
If it is a 4 door, you can still sit in the back easy. If it is a coupe, it will be a challenge to go in and out. It is not recommended for two door to have passenger to sit at the back when the bar installed.
@schizobipolarjoe6 жыл бұрын
no one should be behind the bar rather 4 door or a couple. some one could get hurt if in a wreck.
@TheSconat8 жыл бұрын
Nice vid but that harness does not hang that low. Look it up it doesn't provide and extra support for the harness when its that low
@CipherAuto8 жыл бұрын
The harness bar is meant for the installation for the seat belt. In addition, this is an universal harness bar. It will fit many types of vehicles, so if the support bar is too low, you may need to purchase a longer one from us to satisfy your requirement.
@TheSconat8 жыл бұрын
+Cipher Auto i was just letting people know to have max protection. The harness bar is supposed to be set at a 20° angle down from the mounting points
@phinneassmith15548 жыл бұрын
Not sure what to think about an installation video from a company with replica wheels and a "tech" that doesnt know the name of the hardware
@mysteryy2346 жыл бұрын
As long as that bar is no more than 45° downwards this should be fine
@022rty3 ай бұрын
Nice vid
@vinnyc.12653 жыл бұрын
Biggest thing I learned: Take pictures as you go, in case.
@aiden20yearsago516 жыл бұрын
The sticker is very important!
@jnunez12038 жыл бұрын
i would just cut all the scrap from the old oem harness (anything wouldnt be used anymore after installing the racing bar...
@TheSconat8 жыл бұрын
And it looks bad that low
@jnunez12038 жыл бұрын
Its Voltic i agree
@SupraJoel4 жыл бұрын
Bar should be around shoulder height and welds look like they done by a blind man. Get a refund.