Road Warrior vs. CitizenCycle 3.0 !!!! Yesss!!! Great vid.
@goobfilmcast42392 жыл бұрын
My RR 5 is now well out of warranty ...and IT IS TIME ! ...... Upgrades, here we come !!
@wellfleetion2 жыл бұрын
That thing will blow away most scooters 0 - 30. Torquey beast.
@Philscbx2 жыл бұрын
From years of High end drag bike builds - a mystery of shimmy death wobble was solved with a couple pounds more air pressure. Try that. As soft tires increase in speed, the carcass can change shape just enough to cause this. Trueness is another issue - Highly doubt fat tire mfg for E bikes are very critical on trueness/ runout. Make sure mold line on tire near the bead is equal spaced full circle,, and not tucked in causing tire to pucker in at that spot. Cheers
@SMG-lz1zq2 жыл бұрын
Brilliant! Wow! Great job! I agree with keeping the systems seperate. I understand the benefits but look forward to that video. This whole build has been amazing! Kudos to you! P.S. My wife enjoyed the video too! You have a female fan.
@nomad_lyfe2 жыл бұрын
I had the same issue with the space available on the handlebars, I personally found it so much better after I cut my grip in half next to my half twist throttle, no longer had to move my hand for one, and freed up some space to say the least, the grips weren't super expensive either so I didn't mind doing it, they were rubber grip with outer lock on ring so it wasn't coming off even after cutting it in half to bring the half twist throttle in to place, not to mention looked better.
@markwexy16212 жыл бұрын
I love it! And your exuberance pours out like a childs. Great to see such genuine giddiness.
@SinSear0012 жыл бұрын
Finally the CC3.0 is done and Daaamn that thing is a BEAST!! If I get bored with the AR Kepler I got ordered Ima do this for sure. Good job man WOW. Thanks for the parts list also.
@NuChad20112 жыл бұрын
You built a bad machine! Very good video and shows the ability of an ebike with modifications. 👍👍🚲🇺🇲🇺🇲
@SpongeBrent2 жыл бұрын
Accelerating up the hill at 8:22!! Impressive!!!! Nice ride, sir. Thanks for sharing.
@CitizenCycle9252 жыл бұрын
Thanks 👍
@tdog14612 жыл бұрын
Dude I’m been waiting for this video I got so hyped watching it. I have a magic cycle bike with a 50t chain ring and a cruise at 27 the 28 all the time I’m jealous you got 10+ miles an hour on me! You’re kind of looking for trouble at that speed anyway people don’t realize a bicycle should be moving that fast they seem to always cut out in front of me so I ride in a 25 mph speed limit street so I just stay in traffic like a motorcycle it’s safer then riding up the shoulder it will cause an accident at that speed. Love the videos keep it up with your reviews and other crazy content!!
@alphonsotate29822 жыл бұрын
Beautiful custom build I built a all wheel drive stealth bomber clone bike with aluminum deck metal sides with 20 inch 4 inch wheel fat tires it has a 3000 watt rear hub motor and a 1000 watt front motor and a square head light 4 50 volt 20 amp hr battery's running thru 40 amp battery blender's
@kjohns14132 жыл бұрын
Torque over speed is OK in my book. I like climbing hills quickly over speeding fast down and on straight always. And into the wind is nice as well having that extra power. Great work.
@rickyn11352 жыл бұрын
35MPH;woukd mean I could use 90% of the roads available to me to use. Perfecto,mate. 🤜🏽🤛🏼🙇🏽
@davidhuggins38922 жыл бұрын
With road tires I bet 40 mph is in reach. But more impressive is the hill climb stats. 20mph up a steep incline is very impressive. I think most people who are into E-bikes buy them for the ease of hill climbing. That was the reason I made my build. Good Vid brother!
@hawthornselitelevel12202 жыл бұрын
I got 250w hub on the front of my 700c wheel bike and 1000w hub on the rear. Got 2 independent batteries, , throttles, controllers etc 1 battery is 36v and the second rear one is a 48v battery, It sure hauls ass up hills!
@E-BikingAdventures2 жыл бұрын
Perhaps, but his tires are spinning out a lot. With road tires, it may become too much of an issue.
@rome2522 жыл бұрын
I made the Johnny 5 comment. I am 40 and that movie is still etched in my head and probably will always be! I have the juiced hyper scrambler 2 and I can hit 31-32 and be wishing to get at least a 5mph boost. But my average top speed of 28-30 does good when I make it downtown Winston-Salem
@CitizenCycle9252 жыл бұрын
You really nailed it with the Johnny 5 comment !! I remember liking that movie as a kid, I may have to watch it again. 32 mi an hour for your hyper scrambler is not too shabby, that's all you need really.
@TSnowy232 жыл бұрын
Thank you for adding links to the parts 👍
@spacenut582 жыл бұрын
Ordered my first ebike after watching your cyrusher xl690 maxs review. She might need a front motor too :o). Great build up BTW. Subscribed!
@seleneperez73222 жыл бұрын
Hey citizen! That was fun to watch! I’m buying the EMX extreme 750w dual motors, when it comes back in stock in June! I’ll be very curious to see how it compares to yours. Mine will come with a 60 volt battery so that should make it faster off the line! I can’t wait to off road with it. I also have an xclass 52v that I love mainly for pavement..
@CitizenCycle9252 жыл бұрын
Awesome you know how to pick some fantastic e-bikes. Your 60v EMX maybe faster off the line but the citizen bike would probably beat you on top speed, just due to the wheel diameter. Enjoy that EMX you're going to love it!!
@larrybowers642 жыл бұрын
Hi, I've got 1,400 kms on my dual 750 EMX and love it! To stop wasting power from front wheel spin, I set the power level in the display "P5" setting to 2 instead of 10. No more front wheel spin better acceleration!
@dana.93942 жыл бұрын
Two independent sustems ! Yes i agree Bro ! I'll do the same on my fat tire ebike :) Thanks !
@georgearagon25464 ай бұрын
Awsome buiild. I've heard that the Stealth B52 would crush it!
@somewhat.random2 жыл бұрын
Currently riding a stock Juiced RipCurrent S, and routinely hit 30mph on the flats in "Race" mode. And that's with an XL sized rider like me (6'6"/285lbs) sitting in the saddle. Of course a lot of that is because of the jumbo 52 tooth front chainring. I have a similar sized chainring on my road bike and (when I was fit) could get close to 30 just from pedalling. TBH, that was one of the reasons I decided to buy the RipCurrent S. Due to my size, I'm 100% certain I'm going to burn up the rear hub motor unless I do something to reduce the stress. Front hub motor? Hmmmmm......
@laplantemichel7092 жыл бұрын
My Voltbike Yukon Core midrive fatbike with 1000 watt 1500watt max did so far 32 mph with smooth street tires on flat paved paths
@Altema222 жыл бұрын
Citizen Cycle: Time to climb some hills! AWD SuperRover: What hills? Excellent video. You have my RadMini beat in acceleration by 0.8 second, and I can beat a Grizzly, so I'm pretty sure the SuperRover owns the e-bike dragstrip for now 😊 Electric motor top speed is simply the motor reaching the natural RPM for that voltage, and more power does not change that. That top speed is fine and will outperform pretty much all commercial e-bikes, and Onyx's and Sur Ron's don't count because they are not e-bikes. However, if you do want to go faster, you will need to change to motors with a higher KV rating (RPM per volt), or use a controller with field weakening. Thanks again!
@scurtiszz2 жыл бұрын
Nice !! Awesome job ! I did the Bolton kit on my yamee fat bear 750s , just had to buy a rad harness . That bike also has a bbshd mid drive with a Ludacris v1 controller,. It's sick!! The mid drive is so quiet I also have the magicycle thats dual motors,. Bbshd on that one with the stock rear and controller I can't stop modding 😂
@CitizenCycle9252 жыл бұрын
Sounds like you are creating some awesome custom bikes. Nice work!
@murderdoggg2 жыл бұрын
The very flat beam of your headlights is because they are foglights. The flat beams down low would let you see far off objects or animals standing on the road without lighting the fog all up. 1990's Lexus cars had these annoying yellow projector foglights. These are those with rings. Super cool bike you made. Cheers
@CitizenCycle9252 жыл бұрын
It seems weird that Rad would use fog lights as their main headlight. I was assuming the flat being pattern was meant to keep from blinding oncoming pedestrians and bike traffic.
@murderdoggg2 жыл бұрын
@@CitizenCycle925 Not blinding oncomming traffic or yourself in thick fog is exactly what flat-beams are for. It's just I have only seen them used as low sitting fog lights (on cars). Cheers
@orvillecooper83342 жыл бұрын
You're the man! I'get it one motor goes out you still got another one! I think with multiple batteries like I have that that bike would probably get good mileage! I like speed and distance!
@CitizenCycle9252 жыл бұрын
Yep that's one of the benefits, If one system goes down you always got the other.
@o-townrider2 жыл бұрын
Very cool, Citizen - I’ve enjoyed this series, thanks for sharing.
@CitizenCycle9252 жыл бұрын
Thanks 👍
@boostercontrol1002 жыл бұрын
Looks awesome!! I see RST forks to keep from flying gout I might get some and switch to a geared from as also.
@electricbikeretrovintage2 жыл бұрын
Tomorrow I will add a bafang 1000w mid drive to my all wheel drive Retro ebike of already 4400w.
@veelink63452 жыл бұрын
I can't wait to upgrade my rover 6 plus!
@CitizenCycle9252 жыл бұрын
good luck, i dont think the Area 13 ebikes 35ampController works on the Rad 6 plus though...
@seriouskite2 жыл бұрын
2.0 was the WOBBLER, then you almost got Forked up with the front end .As mentioned we got the Grizzly, been dealing with a damaged battery from shipping another story. Top speed is in the neighborhood , but I don't think the torque and quickness is comparable to 3.O. A.R. needs to see where the 1,000 Watt duals compare to the 750;s. Anyway you mentioned, it may be a challenge for the new and improved Mistress Princess. Congrats on the 20k plus subs. When you do any AR stuff, we;ll be sure to place it in the FB groups, and the management is watching. Grizz and the Misstress vid. soon, please?
@CitizenCycle9252 жыл бұрын
I think some all-wheel drive comparison videos will be in my future 😁 I'm in process of moving to a new house right now So I'm trying not to take on too many e-bike projects at the moment, but I definitely want to do some comparison videos first chance I get. I wish I knew someone that lived close who had a grizzly.
@mrlaw7112 жыл бұрын
Another informative and entertaining video. Thank you.
@StefanRandall Жыл бұрын
Wow, that is one hell of an e-bike you got. I bought a KBO breeze about a month ago, I need a little more power on the hills so I’m getting another bike, still can’t decide what to get?
@stefanrandall83452 жыл бұрын
Impressive speed and torque.
@jeffreyjohnson27122 жыл бұрын
What a great video CC. I would still like to see you review the Fabulous dual motor 26 inch fat tire bike !
@CitizenCycle9252 жыл бұрын
I would love to try out the dual motor road warrior bike as a comparison. Very curious to know if they would be evenly matched or if one takes down the other. .
@kevinnashskitchen35172 жыл бұрын
I think.maybe I would lose the second controller and display by putting those in that tail bag too. Very cool.. Very impressive
@rabbithomesteading3797 Жыл бұрын
Nice build! It shows you put thoughts in it! TY
@ivsc33842 жыл бұрын
Damn I'd take 2 if I could. But it would probably not be legal in Germany to upgrade it so much. Anyway it looks freaking awesome. Nicely done.
@rickyn11352 жыл бұрын
Looks great,for so many wires being ‘exposed’.
@kevinharris33742 жыл бұрын
Awesome mate now I would love you to take on the e-cells super monarch limited edition awd dual motor bike for a spin please 🙏
@johnreynolds60242 жыл бұрын
You are a special kind of crazy, but I love it! 🤔 wish I had the patience to do something like that.
@CitizenCycle9252 жыл бұрын
Thanks.. I think 😁
@ronalddage2002 Жыл бұрын
Im building mine with 3000w rear 1000 front just like yours thanks
@CitizenCycle925 Жыл бұрын
nice that will be fast!
@misterg6092 жыл бұрын
3.0 looks awesome!! Must be nice to be able to accelerate to 30 mph UP a hill. Vee Speedster 3.5 tires got me a couple more mph (maybe your next alteration?). Great job! BTW - I think the guy in the car was hoping you'd build him a bike.
@donnieking53092 жыл бұрын
It's a very nice build
@buffalomind68382 жыл бұрын
Have you considered swapping out the knobby tires for smooth street tires? All that noise will be minimal at best. Great build btw. 👏
@CitizenCycle9252 жыл бұрын
Yes if I was focused on gaining top speed I'd probably switch out the tires to the vee speedster tires. But at this time I'm happy with 37 mph and I like having some traction for off-road.
@houdiniwho902 жыл бұрын
I love you're bike. I was thinking about turning my middrive into an awd but my 750w goes 59 km with a 44 tooth lekkie bling ring and a 52v 21ah battery. But I want to get a 52 tooth lekkie bling ring for top speed first.
@E-BikingAdventures2 жыл бұрын
You are the Bob Ross of ebikes.
@CitizenCycle9252 жыл бұрын
Except my afro is on my chin 😁
@E-BikingAdventures2 жыл бұрын
@@CitizenCycle925 . His afro was his helmet.
@stevemccormack99482 жыл бұрын
It would be a great bike for people living up mountain areas etc. Those mudguards with the lovely stripe would sell all day long.. but I can't seem to find them on Cyrusher site. Generally, full-length mudguards for fat tyre bikes are hard to come by.
@CitizenCycle9252 жыл бұрын
I just emailed Cyrusher customer service and asked if I could buy a set of XF650 fenders.
@wjf2132 жыл бұрын
I always thought geared motors made more noise than direct drive motors, because of the gears. I also read that for durability direct drive are better than geared motors, because most geared motors are not steel gears, but plastic or a form of plastic or nylon for the gears. If you researched this, what's your take on these issues? Thanks, and keep up the great work.
@Philscbx2 жыл бұрын
Wondered this as well - man those are noisy hub motors - so they must be gear type he used. Zero noise, hypoid smooth mesh probably won't happen, costly for one, but that's too much noise for me. That's the trouble with straight cut gears where only one tooth on each gear is fully engaged. Makes me want to look into larger motor with mid belt drive, and front wheel motor. Battery packs - I'd make custom one shot quick connects with inserted and custom enclosed cases fit on both sides below rear axle. Custom saddle bags above battery cases. Leaving large cargo racks front and rear open when needed. Cruiser style. Leaving main frame wide open, and very low center of gravity. Cheers
@franklinwelbes8468 Жыл бұрын
dude you are rad! how about adding a front wheel drive on the wired freedom e bike and hook it up to a second 60v 20ah battery?
@electricbikeretrovintage2 жыл бұрын
I run my 2 motor (FRONT and REAR) Controller with: model 18 Mosfets Rated voltage DC48V Rated current 17A Low voltage protection DC45 45±1A Speed set 1-4.2V Brake input Low-level size 176*82*41mm
@electricbikeretrovintage2 жыл бұрын
@@helenHTID You can see all my specs in any of my recent videos on my channel.
@electricbikeretrovintage2 жыл бұрын
@@helenHTID Each motor has his own 45 amp controller. 48v. I looked in my 2 motors information and they only say 48v. So I stick with 48v. Check on my channel any recent video in the description all my specs are there.
@rickyn11352 жыл бұрын
Insane Bike. In a great way. 🤜🏽🤛🏼 I need this. I may take me a year. I’ve been being rebuilt myself. (New shoulder new Hip (soon) than look out world. Lol
@CitizenCycle9252 жыл бұрын
I wish you a speedy recovery So you can get back out there!
@DyLemmaOG2 жыл бұрын
2 displays one for the plug one for the load
@wbuttry12 жыл бұрын
I kinda feel those motors are working aginst each other. Maybe I am wrong but that seems to be where the noise comes from try one motor at a time It just seemed both motors running it was being held back.
@tonyblonie2 жыл бұрын
I would like to see how it does climbing steep dirt or grass hills. Also how much pulling power it has. This setup would be of interest to hunters and back woods riders.
@fasteddie98772 жыл бұрын
Looks great man, I like speed but I think that might be a bit much for me. Especially since I don’t wear any safety gear, it would be fun beating 5he cars around the neighborhood. But it came out great congratulations!
@erpringle2 жыл бұрын
The torque is impressive but my full suspension rear dd hub motor will do 36 mph, and that's with a 48v battery, so top speed not to impressed but that's about as fast as I care to go on a bicycle anyway. Great video.
@adamv94952 жыл бұрын
Got the same pedals on my 2019 Radmini! I also put the Area 13 upgrade on it. Now I want to spend even more money! Lol
@CitizenCycle9252 жыл бұрын
careful, once you start it keeps going.. HAHA
@adamv94952 жыл бұрын
@@CitizenCycle925 oh I started the minute I bought it. Bigger seat, suspension stem and seat post, new pedals, Juintech M1 brakes, new rotors, mirrors, added fenders. It's too late for me.
@Stellar0011002 жыл бұрын
You probably can squeeze another mile out with some Vee Speedster tires. Additionally, Grin Technologies have various motor controllers now that are adaptable for various hub motors that use an L10 plug.
@russelpieper43492 жыл бұрын
Brian, What did you end up using for torque washers on the front fork. What type, how many and what order? thanks Russ.Your Build looks and puts out great. Good Job!!!!!
@CitizenCycle9252 жыл бұрын
I just used one torque washer on each side. The order was one flat washer, then fork drop out, then torque washer, then axle nut. Same thing on both sides. I did not use any torque arms.
@alwaysdirty1552 жыл бұрын
Real cool set up.only way it could get any better is if you swapped the rear hub motor for a mid system, but I would call it done at this point XD
@dkodko112 жыл бұрын
Excellent idea with the all-wheel-drive but those motors are pretty loud, and I wonder if there is a way to upgrade the Rad to do 50+mph and also have the ability to use one screen and to turn on the rear wheel or both wheels.
@robertbrooks79362 жыл бұрын
Now it’s time to change the rear freewheel to 11/28t. I did that on my himiway plus I changed my crank to the same 53t. I think you will benefit from the 11/28t freewheel. Should be easy to change.
@paulmryglod4802 Жыл бұрын
What brand 11/28 freewheel did you use and is it holding up? I definitely need more gear
@robertbrooks7936 Жыл бұрын
@@paulmryglod4802 I have not had any problems with it. I got it off Amazon. DRIFT MANIAC E-Bike Freewheel 7 Speeds 11-28/11-34T Teeth EPOCH.
@paulmryglod4802 Жыл бұрын
@@robertbrooks7936 thanks! I just ordered one
@robertbrooks7936 Жыл бұрын
@@paulmryglod4802 have you already changed the front gear?
@paulmryglod4802 Жыл бұрын
@ROBERT BROOKS I went to 48t up front. My controller mounts under the downtube and I think I could go to 50 but dropping from 14 to 11 is a much better idea.
@georgearagon25464 ай бұрын
Lots of ebike cheapo Chinese stuff doesn't work. It's only made to look like high end cycling equipment such as your headlights. Look into Cygolite or Nightrider brand cycle lights that actually work. Cool bike!
@DaveMathison5032 жыл бұрын
My stock 6+ gets killed by the sugar sand of the California desert, but with your setup would over power the ground traction as your asphalt spin outs show. Oh and not to mention the sand being kicked up onto the bike. Climbing the sidewall of a desert wash would be nice ( I tried that once and stalled, fell over and rolled BUT missed a cactus, my hat did not ).
@legitempiregaming48582 жыл бұрын
I know most comments are as old as the video.. but some of the links are broken. Could you get some part numbers for the hubs? Supposedly bafang is making a 1500w rear geared.. but I can't find the info again. I'm looking to upgrade my rover that has 9000+ miles on it. The odometer reads 8412 but GPS has me at 26mph... not 21 like the display says... anyway, thanks in advance. Seems like you've spent a ton of money and hours getting your rover the way you like it
@Seafariireland Жыл бұрын
Super bike mechanic!
@buffalomind68382 жыл бұрын
You could likely go 45mph with a cog that has a smaller teeth count. What are yours in the back, CitizenCycle?
@CitizenCycle9252 жыл бұрын
The back is 14-28 The front is 53 I think
@wahiawamang66222 жыл бұрын
Cool video! Great Info
@kenboyb2 жыл бұрын
Can you do a comparison between Ariel Grizzly and your Rad 3.0?
@CitizenCycle9252 жыл бұрын
I really hope to, I just need to get my hands on a grizzly..
@marvinmiller724 Жыл бұрын
I agree they don't look great as taillights, but if U put one on either side of the rack, they could be turn into signals as well brake lights because they are bigger to be seen just a thought What is the size of that front sprocket... does it help with ghosting when U pedal
@rogerf36222 жыл бұрын
Love the 3.0! Impressive. I think you have the original Rad brakes and I would highly encourage you to go hydraulic. Too much speed for manual brakes. Once last thing, the speed is limited by the motor/controller. Johny 5…Hilarious.
@goldbearbunny47872 жыл бұрын
would love to see that head to head with the fabolous bike😮
@Philscbx2 жыл бұрын
Checking items for build - This one is no longer available - Bafang 750w motor 135mm dropout (amazon) But just for the heck of it - look at image for this listing - it appears to show motor with mounting 9 for spd Cassette ? Was this choice of motor intended with that option? Somewhat confused as front motor. There are other sources in list of parts. - electro bike motors - strange web site address. KZbin rejected it. Cheers
@d.s.58072 жыл бұрын
That's Awesome, now change out the rear hub with a 3000 watt motor and go 0 to 60 in no time :)! Seriously the 3000 watt motor with 72 Volt battery will get you to 60 MPH, just don't count on the brakes. I'm thinking of converting my sons motorcycle that hasn't worked since he bought it but with a 5000 watt 96 Volt system Also on the forks for the front hub, you should've added an anti torque system which is nothing more that a curved piece of steel which goes onto the wheel and then is mounted to the fram via a hose clamp. Looks cheap but then you are displacing the power from the drop in to the mass of the fork, even place one on each side if you don't want to spent the money on the modified forks.
@ashpunting2 жыл бұрын
that bike has some power dude yes I love it 👌
@jonjonjrfrmcali2 жыл бұрын
I recall when you first posted the video about the front fork failure, you mentioned you would either fabricate better torque arms or find a solution. Unless I'm mistaken, it doesn't look like you have torque arms at all. I'm curious to know, are you really that confident in the new forks? Or what did you end up using? It's really hard to tell from the video.
@CitizenCycle9252 жыл бұрын
I do not have any torque arms on this bike. Only using 2 torque washers. I have faith in these forks since they are the same forks used on other all-wheel drive e-bikes.
@jonb85172 жыл бұрын
Check out the Eunorau Defender S. dual Bafung 750 watt motors. Now you can buy a bike similar to your custom bike.
@joelresto.juuntitledgtuu4i4352 жыл бұрын
I've considered doing the same thing with my ebike. Its a rize blade from 2020. Aliexpress has a dual motor kit for 20in and 26in tires. They are both 1000w gear hub motors with one controller operating both motors and a throttle controlling both motors. Prices vary from supplier but the cheapest one I found was around $1,200. My concern is the durability since they are not name brand motors (jue shuai) and the longevity of a single controller doing all the work.
@khronin2 жыл бұрын
I got one off ebay and a battery for about 600 total-I have videos of my AWD CSC 750 and can not even fathom riding without AWD.
@CitizenCycle9252 жыл бұрын
I really like the bikes that rize is offering. Have you been happy with the blade? If you decide to try one of those kids let me know how it works out.
@joelresto.juuntitledgtuu4i4352 жыл бұрын
@@CitizenCycle925 I've been really happy with the blade. 2 years as a daily driver and no major issues with motor or the electronics. They have great customer service and reliable bikes. I have around 7k miles and added 2 52v batteries to it. Yeah I'm tempted to buy the dual hub motor from aliexpress. If I do I'll make a vid on it.
@melvinbelcher76062 жыл бұрын
You just answered my question
@melvinbelcher76062 жыл бұрын
Do you have the Bolton up grade on the front motor
@cedmanotro2 жыл бұрын
Hey i've got an update on my dual drive step through rover, still the same upgrades, just moved the battery from my rear panier to the front on the bottle screws and no matter what I do i can't get it to wobble like yours anymore, I also managed to hit 51km/h with that ebikeling kit and the stock battery
@CitizenCycle9252 жыл бұрын
So you have two batteries mounted on that down tube? If one's the stock battery what's the other?
@cedmanotro2 жыл бұрын
@@CitizenCycle925 One's on the front bottle screws and the other is the stock battery in it's little spot from rad, the front battery is a 36v 11ah rack battery from envo, it's super jank but it's what I put on there until em3ev gets some batteries in stock
@jasonsmith11012 жыл бұрын
What is the displays make? model? thanks BTW awesome job!
@CitizenCycle9252 жыл бұрын
LCD8H displays
@spivaks12 жыл бұрын
what is your range on battery going 20 - 30 miles ?
@davidhuggins38922 жыл бұрын
One more question, have you ever reviewed a Trike E-Bike before?
@rabbithomesteading3797 Жыл бұрын
Hard to see if your are but lean forward weight front end down. And Do this again with the Wired freedom please! :)
@rabbithomesteading3797 Жыл бұрын
I never had a 20 fat tire but I believe that might be better being smaller with the same stuff as wired freedom spec power wise.
@Americadoe Жыл бұрын
How is that front fork holding up? I have the same fork, contemplating doing a front hub motor with some torque arms.
@joepaquet4332 Жыл бұрын
Where did you find the fork? Ty
@InkDropFalls2 жыл бұрын
wonder what happens if you max speed ...but then come off the front motor see how quick speed drops or how long can rear hold the speed once it up ....
@jasonwheat52422 жыл бұрын
I'd like to see some off road video's!
@garybotts4713 Жыл бұрын
Will the controller work on electric X premium
@rickwatkins64762 жыл бұрын
Looking at buying a ebike, leaning towards the Hemingway, would like to know which model would best suit me. Want to just ride but also want to go off-road with my fishing gear to ride around lakes as I am old and can not walk the distance carrying my gear that far. Also, know anyone who makes a back rack set up to carry fishing rods etc.
@williamnunez96092 жыл бұрын
your getting restricted at least 5miles from the knobby tires which could be reason for wobble and extra noise slapping that road, could you upgrade those tires for road
@Sagea2 жыл бұрын
Can I do this to my old school Giant touring bicycle? like 1991 or 89 I don't remember the exact year but it is as old or older than me
@mydogcoda9072 Жыл бұрын
My rad sounds the same. It's so annoying how loud those things are. At least I know I'm not the only one lol
@bradbeals17412 жыл бұрын
What your thoughts on the newer eunorau AWD 750×2 bike?. Wandering how it would stack up against your machine.
@CitizenCycle9252 жыл бұрын
Looks like a very nice machine but would not keep up with my bike. It has 22amp controllers, my controllers are 35 amp.
@bradbeals17412 жыл бұрын
@@CitizenCycle925 gotcha... My wife and I are in the market for a couple ebikes. Just trying to pick a brand..seems the radrover 5 will fit our needs. Plus I could upgrade components on mine.....whats your thoughts on the newer version radrover6....seems to me the 5 would be best. With nothing integrated like battery and controller it would be the easiest to upgrade components..? Thoughts?. Thanks in advance. Great channel by the way
@mvfleener2 жыл бұрын
Mind if I ask which bike shop in the Raleigh area laced your second motor? I can't find anyone to do that.
@CitizenCycle9252 жыл бұрын
Trek in chapel Hill
@RichWomack Жыл бұрын
Try swapping the tires out for some Vee Speedsters.
@CrazyTruckinS102 жыл бұрын
Flat out, that sounds like the audio US Army used in Vietnam War to scare the enemy
@marvinmiller724 Жыл бұрын
I wonder about a mid drive torque sensor with that 750 font wheel how that fair ? Does that bike have a cadence sensor or a torque sensor
@CitizenCycle925 Жыл бұрын
Cadence
@gigglecon9992 жыл бұрын
Can this be done on a Ariel Rider Kepler into awd in the similar set up as this?