Citroen C4 Picasso, How to change the rear bulbs...

[@017hamilton]

Thanks man, this is exactly what I needed exactly this moment

[@LMAutoRepairs]

☺️ 👍👍👍

[@Qban220]

Defiantly one of the most challenging repair by Louis yet! ;D

[@LMAutoRepairs]

🤣🤣🤣🤣🤣🤣🤣🤣🤣 Men... you genuinely made laugh.... Thanks for the comment... really! 👍👍👍👍

[@osezuaogbidi]

What type and size of screwdriver did you use?

[@WendenWarrior]

Thanks for the video. Do you know what the black round thing is called that sticks out through the cover you remove in the beginning? I have one missing and one broken, would like to order new ones.

[@LMAutoRepairs]

I believe they are called "stop buffers"... Thank you for watching!

[@Stephentoutdoors]

My brake light is out and can't find the car when I put reg in and someone said it might be led, I haven't a clue, can I buy just a random brake bulb to try? Sorry if a daft question, I've the same car as this in the video

[@LMAutoRepairs]

Need to check that voltage is getting to the light assembly... using a test light. Could be that it is a led one, those are not easily replaceable... in most cases... 👍👍👍

[@ישראל-ג1י]

I would also like to add that in this vehicle after replacing a light bulb, the switch should turn off for five minutes and then turn on, to erase the fault. Otherwise the bulb will not work.

[@LMAutoRepairs]

Can't remember if I had to do that... probably I had...😉 Thank you for watching and for your comment!

[@lul196613]

Hi I would like to ask you if you can help me I have 2018 Peugeot 5008 I would like to find the two bins are in the BSI For looking and unlocking is this possible because I would like to connect new system I bought I found all the wild except the central looking wires Thanks

[@cristiancristian735]

Foarte bun...exact cum trebuie!!!🙏🙏🙏

[@eddieblackmore3188]

Hi, I love watching your video's and I was wondering do you have any video on what to do after replacing the old head unit with a aftermarket one replacing it was the easy bit but I'm having trouble telling the car to stop looking for the old one as the spanner light is always on. Thanks.

[@LMAutoRepairs]

I don't have... but must be something under configurations I would guess... Thank you for watching and for your comment!

[@Tal.10]

Hi, i changed the bulbs but it still doesn't work, i think its the connector plug. Do you have a video how to change the connector?

[@LMAutoRepairs]

Don't think I do... but before you blame the connector, have you measured that power and grounds are at the connector? 👍👍👍

[@Tal.10]

@@LMAutoRepairs I don't know how to do that... Do i test it with a multimeter? Do you have a video how to do it? I did see the ground wire burnt a little, and when i push it inside with power, the brake light is working. Thanks for your time

[@LMAutoRepairs]

Clean the contacts, and make sure they are making proper contact with each other... Yes, you measure with a multimeter... But if the contacts are burnt, tha my be your problem... 👍👍👍

[@Tal.10]

@@LMAutoRepairs thanks a lot for your help 🙏 do I set the multimeter on DCV & 20? And what colours do I need to check? I have brown, red, pink, green. Thank you brother

[@LMAutoRepairs]

20v dc should do... One wire should be a ground... just check you have 1 with continuity to chassis... Then the others should be battery voltage to the bulbs...

[@johnhalm6020]

Hello pls what tool can read and write continental EMS 3101 ecu from a Renault latitude

[@LMAutoRepairs]

Hi I would guess K-tag... but think I never done that one... Sorry if I can't be more helpful... Thank you for watching and for your comment!

[@ecutechltd]

Where can i buy the brake pedal activation device? Can i just use an old broom handle and swap the eeprom over from my toaster (obviously after ive flashed the brake pedal activation firmware of course)???

[@LMAutoRepairs]

Sound like you cracked it... I can send you the flash files for this type of brake pedal activation... I have the latest versions al well... Just make sure you change the bytes on address 0x0F23 to 01 on the EEPROM... you should have 00, which means no update allowed... change it to 01 and should work ok... 👍👍👍

[@ecutechltd]

@@LMAutoRepairs Thank you. Will try and report back...

[@LMAutoRepairs]

@@ecutechltd 👍

[@MartiA1973]

Priceless information. Thanking you

[@LMAutoRepairs]

☺️ 👍👍👍

[@CarsExposed]

Sorted mate 👍... I like your new brake pedal device but you will have to wait until next month 😋😁👍👍👍

[@LMAutoRepairs]

👍👍👍

[@markwinvanrijnberk1899]

About the error code "So it's not wrong" LOL

[@nemanjadzombic6101]

Thank you for another great video!!! Could you do a review video on that special tool for pressing break pedal :)

[@LMAutoRepairs]

🤣🤣🤣🤣 It is a very expensive and technical tool... 👍👍👍 Thank you for watching and for your comment!

[@Paolo0902]

You should install new bulb in gloves. Fingers are leaving skin oils on the glass and this causing to heat up bulb in the place of fingerprints more. That is also cause for blown bulb (more in case of headlights bulbs have to say)

[@LMAutoRepairs]

Yes.... head light bulbs I always do... Thank you for watching and for your comment!

[@beluxauto5968]

It doesn´t always have to be a struggle . Sometimes it´s nice to have a straightforward repair and yes , you for sure erased the fault code

[@LMAutoRepairs]

Thanks! 👍👍👍

[@stefanridzon7301]

👍🏻👍🏻🤝🇸🇰 Super pozdravujeme

[@LMAutoRepairs]

☺️ 👍👍👍

[@electronic7979]

Good repair video

[@LMAutoRepairs]

Thanks! 👍👍👍

[@engeneer_ru5827]

:) And such a video, someone will be useful!

[@LMAutoRepairs]

Thanks! 👍👍👍

[@isalmankhan1]

Thanks for sharing Bro👍

[@LMAutoRepairs]

Thanks! 👍👍👍

[@foppo100]

Why don't you use both hands unless you have a problem?

[@LMAutoRepairs]

The other hand was holding the camera?🤷‍♂️ LoL Thank you for watching!

[@adrianvasile4241]

LM Auto Repairs I can have your phone number

[@jusb1066]

An actual easy job with no corrosion 😄

[@LMAutoRepairs]

No corrosion...yet...lol Thanks! 👍👍👍

[@maforautorapair5935]

Thankss , good job

[@LMAutoRepairs]

Thanks! 👍👍👍

[@-MrMohit]

Thanks

[@LMAutoRepairs]

☺️ 👍👍👍

[@MCRoadk1ll]

Thnx!

[@LMAutoRepairs]

☺️ 👍👍👍

[@eddieblackmore3188]

Ps it's a Renault laguna mk3

[@TheMcooper17]

i bet if it were a bmw or ford of the same age youd need maxisys to tell the car, new bulb fitted

[@LMAutoRepairs]

🤣 👍 Thank you for watching and for your comment!

[@TheMcooper17]

​@@LMAutoRepairs rather unfortunate for the people who dont have one like myself, i have this myself www.amazon.co.uk/Professional-Function-Ostizieren-Management-Compliant/dp/B01N2ISTNG/ref=sr_1_2?keywords=kw808&qid=1582039480&s=automotive&sr=1-2