I want to Guy this car… its from 2011 tfsi s`line it just has 37700km on it. (23,5k) Miles. For a price of 16950 euro. Should I do it? And is the price ok? Please comment and let me know.

had same problem and chaged out the compressor filter ....good to go

Great stuff as usual, thanks, mate

Hi Luis nice vid like always! I have a project for you. I live far away from your country (UK I guess - 2000km) but I could send the controller for reprogramming by DPD DHL or so.. Here is the issue: Renault Automatic AC controller model year 2017.12. Kangoo but it does not really matter I guess due to Renault Lego style building strategy... So it works without any error code scanned with Xtool, blowing cold air for a while but after a certain time on long ride I see the 0 °C blowing air temp rises slowly to 7-13°C independently from Ambient temperature or set value. I see the command set value remains at minus 10°C and the mixing flap is not opening to mix hot air to the cabin.. I have another controller from same model but from a different earlier built year of 2014. It behaves exactly same way. I thought a lower emission level vehicle's controller programmed differently. So looks like it is a factory programmed "feature" to mess up my fresh cold air :( The temp rise is happening very slowly roughly takes 30 + min to reach + 7- +13°C from the initial 0°C. I can monitor it nicely with Xtool. I guess they are simply modulating the AC clutch with PWM so to speak fuel economy and Emission reduction Euro 6b purpose... Otherwise Fresh AC gas and new ac radiator installed by official service. It was always like this but now it bothers me a lot especial in summer hot 30+°C. Can you adjust/Check the program of AC controller IC? It is really a hard core stuff so I need someone who knows it very well. If I can buy from you a set/kit or something like that then I could play with it on my own of course but if u have ever met such a renault controlling issue u might have a solution already! I thought downgrading the Automatic AC to Manual one but it means I need to replace everything which is a nightmare lot of work. Alternatively Build an own controller with ATmega328P or Arduino... but for this I would need also lots of info about wiring actuators and communication LIN or whatever they are using..... What do you think? or Do you know someone who can help me on this topic? I never had automatic AC in my life but I can promise I will never buy again vehicle with automatic one!!! Manual AC is the best!

Thanks for making this video. I have the same issue in a 2013. Off to get a new key tomorrow.

Could you please share the video of the wiring diagram ? Having same problem

Hi Luis! Another great fix and very informative video. It’s great to see so many parked cars in your neighbourhood so looking forward to watching many more of your car repair videos 😊

Respect

Hello, I have Mercedes x164 and I once in a while I get no sound from the amp once it rains. Guessing this has to do with the rear sam. I have Mercedes star computer.

Hey, I have the same car. I also have a 3ff1 code with another air leak code. Would the same air charge pipe cause these issues? Eg bad MAP sensor or a leak in that pipe

How can I message the guy in this video to do my car

Hello brother, I had exactly the same problem and also the maps were not used at the same time. Do you know what is the reason?

6:42 no electronics on materials like seats blankets,could be fatal :)

Hello master Luis, how are you? I am from Turkey and enjoy watching the videos of Master Turan. Where and how did you learn this job?

Qashkai j10 такая же фигня. Задний левый рычаг пошёл

So what was the problem i watched the video many times although I couldn’t see the answer please i have the same problem exactly

I did everything you have done but mine does not have a problem with the ground. The brown cable does not have continuity. So to test it, I ran a cable straight from ignition, I put it into brown cable slot, to the starter where I tied up tight to the that little plate, I put everything together as normal and I turned the key, it is starting without problems, so in my opinion is the brow cable but I heard others saying that it might be a relay because the brow cable is not straight from ignition to starter. Is that right? What do you think it can be?

You helped me fix mine, but I didn't do it mechanicaly.. there is an option to calibrate it after you clear errors... 5 seconds holding down then release one second the up 1 second.. and it solves it . Anyway thanks

3 month before i had same body modul. Problem was Air condition original was died and donor all works but not air condition. Coding without sucess and on end eeprom change from original to donor all work perfect 😉

Want car back by 3pm.... here you are keys back goodbye 😅

top

The overcurrent of the slow-running motor burned the relay. It does happen.... Great job!

good morning Luis nice fix not many would include a naff up with blowing the diode but you fixed it 100% bet all your customers love you keep up the good work

You sure do look after people only charging for price of a relay you done them a favour when the other alternative woud of taken weeks to arrive

Hi Luis just had the same problem but my window was the electric motor that was the problem good job

Just fixed one of these in a caddy. Key sticking. It wasn’t the lock barrel or the key but the cast mechanism - changed it (£15 ebay) and all sorted. Didn’t have to remove the airbag or steering wheel - just used a punch to remove the security screws.

Hello sir, can you show how you made this cable ??? Your exact connection and all

mine is starting to act up im going to save this video for down the line

Shame it will now fail mot for steering lock inoperative 🤣

New one only cost about €35,- They go bad many times.

Hi Luis! Insanely good fix !

Love that intro and outro :-) happy neighbour to have you next door.

How much did you charge the owner? Pls do tell and not be like that company. 😅

Why not just replace the columnlock?

Hi Can you supply the pin code Peugeot e-Expert 2021?

I wonder if he would get paid out by insurance if the car is stolen and the steering lock has been removed?

if you leave this car lock and key and put body and cables from another car does it need programming?

If you replaced it, what would be the programming procedure?

With systems like this, I'm always wondering if there is a possibility for the steering wheel to get locked during driving? Leading to a disaster.

Bon dia. the there not crazy expensive .it is worth doing

top

Good morning LUIS

Maybe try UPA instead of xprog. It's reliable. Thanks for your videos

Morning sir..i'am from Malaysia..that now i have the Peugeot 308.. suddenly can't start..this light at only battery and handbrake..no check light engine..this fault code 04a7 04ba 0569 05ff 0062

Knowledge is worth more than Gold, you got it man. Good luck. Pat Ireland

Hello, what product do you use to clean it with?

Where are you located! I have a very very similar issue and need help🙈

I have this same problem atm. Thanks for video

If i make full swap for mc12, the car start ? or i have to learn card ?

Hello good morning what models auto year