City inspector came by the old NAPA dream shop today...

[@jamiecampbell3068]

You have dirt cheap, gas bay heat. And you want to remove it why ?? So when your power is out .. the only heat your building will have .. IS GONE ?? Great idea !!!

[@robsdeviceunknown]

I hope you don't regret removing those heaters. It does not hurt to leave them in their. They are more efficient than electric. But man I bet it feels good watching your dream come true.

[@brandonkruse825]

Unless he is going with heat pumps which depending on electric cost and the same or slightly higher to run than gas, however if he solar panels the roof he could end up with almost no electric bill.

[@tonyloc1331]

They work so good for winter

[@TheTheRanger1]

@@brandonkruse825 no electric bill but he ends up with a loan payment and depending on the size of his system, the payment could be more than his electric bill.

[@ryanc8188]

Oil usually floats on water so that sump probably has pipes off those 90° that run down to like 6"-12" from the bottom to push the water out and leave the oil in the sump. If you don't change the ballast when you go to led they usually don't work right if at all.

[@MONSTERMISFITS]

I'm doing the same thing doing a 10k building for making Halloween props in birmingham. I painted all my celings black walls a light color..

[@billyoung4364]

Love the series and thanks! Just a suggestion but a gyro stabilizer would do wonders for the fast back and forth motions.

[@kinkyslayer]

100% dude makes me dizzy with all the spinning

[@HuntMountain06]

Oil Floats. Not sinks. The oil is on the top. 👍

[@SRTifiedRAM]

I’m digging these shop update videos for sure. I feel like I’m getting spoiled. A couple of my favorite detailers to watch are you and Detail Geek and you’re both in current stages of a shop build/make-over. Definitely keep it up. I enjoy the videos from this perspective! 👊🏻

[@revfred2008]

Really waiting for a other video!

[@markb.1259]

Caleb... You are a very kind and down to earth man! Thank You for opening up your new business site for the world to critique! You have hit this effort out of the park!!! Looking forward to all your new vids!!!

[@bbbeeaann._]

felt like I waited a year for this video , but the shop looks good. Merry Christmas .

[@twodutch1969]

Oh wow!!! You did it! Congratulations!! I started watching you when you started with Mater and followed you for about a year and just looked again to see where you are and what is going on. You can be proud of your accomplishments! Well done 👍 👍

[@ParoDoXz]

Thank you for the support!

[@fender5247]

Shop is looking great

[@aboudi233]

I just watched all your videos regarding the shop build just because I’m also about to build my shop! This is so inspiring and we get to see (briefly) how and why this business is so tedious and expensive, you did it well and I’m definitely going to take some notes from this for when I get started on mine! Already got the shop and now start working. God bless you and happy new year!

[@emilyspendlove806]

I just found your channel today. I’m very much enjoying your video progress of the new shop! Congratulations!

[@wesleydean4228]

Duuude, better and better every video. Living the dream Man.

[@rafaelramirez4371]

looking good the light at the end of the tunel is getting closer

[@copcoopper]

Good job you are doing a good work on the shop

[@kellsbellls]

I found your channel from this series, I watched all 6 or 7 yesterday and saw this up this morning! I love it! Fingers crossed your electrical just needs a few simple tweaks. Merry Christmas! Can't wait for the next video

[@michaelsimolke5697]

It's a oil water separator drain. They are very common at shops.

[@King_Springmeyer]

Yes and they all get pumped I work at firestone and we have those type of drains

[@cowboychevyschneider]

great job hope you have a wonderful Christmas keep the great work

[@robertjean659]

Shop is looking fantastic, can hardly wait till it’s finished. Merry Xmas to your and your family. 🎄🎄🇦🇺🇦🇺

[@cedricbroussard8738]

We love the videos and Merry Christmas to you and your family from the Broussard family!!

[@stevensilver1014]

all I have to say Is may God Bless you & your new shop Merry Christmas

[@ti0039a340]

the drains separate garbage from the liquid and i do believe the shop has a oil collector tank underground, they usually put them in back in the 80s and 90s to separate water and oil for tankers to pump wast oil out evry 2 years or so

[@timothygala1583]

Looks great! I can appreciate your attention to detail.

[@netmaster88]

I'm enjoying your content. Looking forward to a final walk through at the end

[@AListProductions]

You motivate me bro

[@ParoDoXz]

Miss ya man! Hope you are doing good, Merry Christmas!

[@hashimsadiq8107]

I love your videos I just watched all the new shop episodes and it's awesome can't wait till everything is finished

[@ParoDoXz]

Thank you for the support!

[@Nicolas.P.]

Hi Caleb, I just discovered you yesterday, and you are already one of my favorite KZbinr! Happy Holidays to you and to all your staff and family!

[@ParoDoXz]

Thank you Nicholas! Merry Christmas!

[@repz0611]

Shop is coming a long Merry Christmas 🎄

[@martinquintana5837]

Shop is looking awesome Caleb. I'm a new subscriber to your channel and am enjoying it. Looking forward to your next video. Have a blessed day and Merry Christmas and a happy new year to you and your family. Aloha from Kansas

[@ParoDoXz]

Thank you Martin, Merry Christmas to you and your family as well!

[@markb.1259]

Merry Christmas Caleb!!!

[@MrSonordrumr]

You guys are killing it, hope the new shop is successful for you!

[@gauravmishra5959]

So many days waiting for the video and finally it is Love to see you guyz back

[@lorenmeyer5290]

Looking good!♡ MERRY CHRISTMAS YOU GUYS!

[@MrHomeland]

Looking outstanding, Merry Christmas my brother, God bless.

[@getzybreuer3691]

Thanks for the video the shop looks amazing beautiful Merry Christmas enjoy your holiday with family

[@bigred8835]

Looking great man, can’t wait to see what the rest of the shop is going to look like.

[@p3692]

Amazing transformation, enjoy you holidays

[@garysmith5434]

Merry Christmas to you and family

[@travisbell6998]

Looks great! Keep posting!

[@netmaster88]

I love how wide he went on those mud seems. I can't tell you how many times I have seen guys skimp on like 4 inches and I'm like dude wtf do it right.

[@marcusmoore7725]

The shop is looking great! Good luck with the success of your business!!

[@loganwelch5791]

Merry Christmas! Loving the video’s wish I could watch them every day! Lol

[@7.3life]

Looks good and Merry Christmas to you and the family and have a happy prosperous new year! 👌👍

[@hnhardin1217]

It is looking awesome!!!

[@Barker-pu7ix]

Idk if this would help but you could do a monitor setup to where it displays cost for certain things like for example exhaust x amount

[@eoghanbishop9745]

Happy Holidays buddy!!! Thank you for sharing your experience, all the best in the New Years!

[@dennisivans3100]

Merry Christmas eve shop looking good

[@adkctv2860]

It looks like that's an oil/water separator in the floor under the drain. If so that's great, can be very expensive to install. My new shop has 4 installed and I was jumping with joy when I learned that

[@gabrielconrad8548]

Recently found your channel. Great content. I’m really enjoying this shop series.

[@BrianODonohue]

Nice Series. Looking good bro! Merry Christmas!

[@TonyTorres-jj8ku]

Merry Christmas!!

[@greghiebert7787]

Great job on the shop,look forward the next vids on the progress,have a Merry Christmas and a Happy New Year to you and your family!!

[@vic745]

Looking good brother. Happy holidays!

[@j81851]

Can't wait for the next video Merry Christmas great job!

[@scottschindler5510]

Love your content. Shop is coming along great! Looks sharp! Happy Holidays to you, family and your crew!

[@roderickmoyer9851]

Looking really good Merry Christmas congrats again…

[@stevengullison5123]

Great job and merry Christmas

[@ParoDoXz]

Thanks Steven! Merry Christmas!

[@gauravmishra5959]

Merry Christmas ❤

[@Rob-bs4rn]

You should totally get a popcorn machine for customers.

[@cdnroofer]

MERRY CHRISTMAS EVE FROM HAMILTON ONTARIO CANADA!!!

[@grizUSMC0331]

Shop looking good brother big fan from Birmingham, Alabama SemperFi!

[@markb3129]

Looking good. Glad you got a good sheetrock finisher. Merry Christmas to you and your family!!! ✌

[@pomaicarpenter4315]

Your dream shop is also my dream shop

[@pomaicarpenter4315]

U need to get that auto shop going too get a few good techs to bang out jobs

[@adamhogeland8033]

Keep up the great work

[@daverarick7636]

Looks like an oil/water separator. Call safetykleen and they will clear it out.

[@code10garage94]

Looking good bro!!👍🏼…Aloha🤙🏽

[@jeffreymurdock8366]

Looking good. The way the lights are doing it seems like there may be a loose wire somewhere.

[@user-qe9rw4ne9n]

Envisioning a seating/bar type viewing area and more glass for customers to watch (maybe the next remodel get things done for now.

[@scottestergaard6535]

Merry Christmas Caleb gotta be honest kinda wanna be you! #Exciting times!

[@brendonpartridge6362]

Hey parodoxz u and your family have a safe holiday and merry Christmas from my family to your family u really put out the best content on your channel your new shop is coming together but slowly u definitely my favorite KZbinr ever keep up the great work on your channel 🎁🌲😀 u have a good Christmas

[@revfred2008]

Bro, love the shop.

[@1underground747]

Looking freaking amazing it’s so nice with everything going on today to see you doing so awesome an loving the video’s keep them coming god bless boss have a great Christmas love from Texas

[@BO3L3]

hey i watched you build up the shop and you are doing great and i love the content but 1 small sugestion get a good camera for filming quality is key on youtube keep up the great work merry christmas

[@gabrielj1620]

Might need to put a resister for the leds

[@Thomtleonard]

They have a product that is called oil pads they float on water they do not absorb the water but they will absorb the oil once they get full of oil you pick him up and you throw him away

[@funtyes1970]

if you dont want propane or natural gas what you going use for heat? just wondering thanks

[@CaptainMcFartin]

I want to make a suggestion on your security camera system. I would highly recommend going with a brand like ubiquiti that can run your security cameras, your wireless network, your phones and your hardwired network.

[@mikemontgomery7337]

Don't point out ur concerns. Finders keepers . Don't red flag stuff. They can shut you down on the spot

[@koryleague8833]

Great series. Alot of work. Do you plan major changes for the outside front of the building

[@ParoDoXz]

Yes, we will be changing a lot

[@markb.1259]

LOL... Wasn't good in math class!!! Too Funny!!! haha

[@butlerdawgs78]

Is there a break room space/ area for your guys? Just curious.

[@kumbaandfrodo3002]

I love your videos and the new shop. What are the dimensions of the actual shop part? Excluding the office/lobby area.

[@billwestphal1421]

Get the ballest free led bulbs for the outdoor sign. No cold weather flicker. I'm betting the a magnetic ballast and not electronic.

[@christernorlisvenningsen9197]

Great shop, and great work. But is there something wrong on the side of the light switch in the bathroom? Merry Christmas 🎅

[@diablalexfull]

Currently looking to start my own shop and now getting worried with the required amout of work lol

[@bradnewberry8004]

Great new shop man, looking great, you haven’t had Jonathan on your Channel in a little bit? Do you still see him? Hope you have a very merry Christmas 🎄, love ❤️ watching your videos

[@ParoDoXz]

We talk all the time man, he’s just focused on building his channel which is a really good thing. Merry Christmas!

[@bradnewberry8004]

@@ParoDoXz very cool

[@Bradini267]

Are you going to spray the ceiling tile grid black?

[@simonclarkson9249]

This is true because it's random info left in the comment section (obviously). I was told by a sparky, the ballast can just be completely removed from the sign, and apparently you just run the white wire to one side, and black to the other, and it'll run just fine.

[@ScottCalkins]

Looks like that pit is like a 'grease trap' in a restaurant. Filtering out the oil is what it is designed to do.

[@eliamvaldeszavala1544]

primer sum u sand down too?

[@stinkphupa6048]

Where’s the updates man looking forward to seeing it all looks great so far keep grinding my boi

[@JB-xp8xl]

It's not just a drain it is a grease trap. Thats way the pipes turn down.

[@SegoMan]

Yup it's called a siphon, if you ever build one the down tube needs to be 2-1/2 x the diameter of the pipe's ID. they need an occasional burping at times

[@randyfowler6928]

What u doing inside the bays

[@scottmakurat5159]

What are you planning on doing with the old shop

[@tommyplayz340]

I need a new video 😭

[@steveh4098]

Hopefully that drain has a oil water separator on it

[@oliverroedel1111]

it is an oil/water seperator

[@bfrost1017]

That is the shop oil separator for the sewer just make sure to have it pumped out every year by oil disposal company. Well all the old in ground lifts are gone you just don't want core samples taken from around the shop. since you own now. brake kleen is what you are worried about being found it will leak threw concrete. Oil is always is going to be on top of separator water drains front bottom clean the pit good and flush out all the drain guy might be good to have drains flush out at same time, can be done power washer.

[@randykmlwa]

I'm surprised that they didn't have an oil interceptor somewhere on the property to catch the oil.