5 Big Mistakes in Cantilever Beam on Site Practical Video | Civil Site videos |

1) Construction cost of 1000 square feet House 2019? Cost of House Construction per square foot 2019
• Construction cost of 1...
2) Grade Of Concrete and water Cement Ratio
• Grade Of Concrete and ...
3) How to calculate Cement, Sand, and Aggregate for M20 concrete
• How to calculate Cemen...
4) Depth of Footing/Foundation and Reinforcement details in Foundation
• Depth of Footing/Found...
5) Maximum distance between two RCC columns?
• Maximum distance betwe...
6) Big Mistakes in RCC Slab - Lapping Mistakes
• Big Mistakes in RCC Sl...
play Lists :
Construction Videos :
• How to Chose Good Qual...
Construction Site Visit :
• New Exterior Design fo...
House Planning Play List :
• How to Study Column wi...
#CivilEngineers #CivilEngineering

[@waluohopaulo2116]

Thank you I have learned something new about cantilever beam

[@Vilhelmina75]

That is not simply supported beam. That is continuous beam. A simply supported beam is supported at its ends by either fixed supports or pinned joints, while a continuous beam is supported at more than two points, with at least three or more supports

[@michaelgu9907]

The purpose of having a bunch of engineers is to minimize mistakes..hehe just kidding.. God bless

[@bisayangjuan]

Thanks for useful tips... Please answer my question. I used 1:3:4 ratio of concrete mixture in my column.... Is it okay or not? Your answer will be greatly appreciated

[@CivilEngineerss]

Yes normally 👌 🆗️

[@sarttfft]

thank you for the amazing presentation. I am going to make 5 ft length of cantilever beam. Size of column = 10'' x12". Any suggestions on size of cantilever beam, placing of reinforcement, developmental length and hidden beam?..

[@mamuanahrahsel8486]

👍

[@aishwaryaprateek3385]

Sir , mne ek jagah dekha tha ki 8ft chhajje k liye unhone 9x18 k beam mein 3 ( 20mm ) ka top p diya aur 2 ( 20mm ) ka bottom m diya, kya yeh sahi hai ?

[@ShuaCigar]

Bro..that is not simply supported beam..that is continuous beam

[@kojomensah7474]

So why is there not a drawing to tell the inexperienced to do these things properly??