Design of Cantilever Beam | How to Design a RCC Cantilever Beam | Cantilever as per IS 456-2000

[@dipen_official]

Sir we love yr videos a lot, plz be concern on our interest of learning through yr videos And teach us continuously

[@structuralanalysisanddesign]

It gives me immense pleasure to know that you all love my videos, definitely i will try my best to upload videos regularly

[@rohitshetty8758]

​@@structuralanalysisanddesign why you took 1.5

[@rohitshetty8758]

​@@structuralanalysisanddesign sir

[@mdhasann2640]

@@rohitshetty8758 it's an factor of safety

[@NasirYousuf-m6b]

i'm attracted by the beautifull and simple way you made me understand this lesson thanks sir

[@bigfore7083]

I wonder, how on earth someone put a dislike to such well polished explanation

[@structuralanalysisanddesign]

Thanks for appreciating, some people will be there to dislike but it gives us more motivation to do more videos which are helpful to civil engineering community

[@saifaly359]

A very thank you sir. Because of you I passed this subject

[@vikeshtalda1069]

Thank you sir, your explanation is so simple, we understand like a piece of cake.

[@structuralanalysisanddesign]

So nice of you, these kind of words will motivate to come up with more videos, support us by sharing, all the best

[@fistonndongalo139]

SIMPLY THE BEST , Keep up the great work Sir

[@structuralanalysisanddesign]

Thanks a lot! Keep supporting by watching and sharing

[@ashokkumarar4334]

I found something wrong i.e., Instead of taking Mu=0.138 fck b d2 for Fe415 you took Mu= 0.133 fck b d2 which is for Fe500. I have been seeing all your videos and its very clearly explained.. Keep doing brother..

[@slgamerty9076]

Ur my god plz continue your vedios 🎉🎉 super explanation sir 😊

[@yuwabharatshakti3603]

First of all gd evening। Your videos is very helpful in ssc je mains paper।

[@structuralanalysisanddesign]

Good Evening, If helpful kindly share the content among your friends circle

[@vivekruthvik7468]

here before 3 days of my exam

[@abhijeetbhatnagar3562]

Thank you sir, very well explained

[@structuralanalysisanddesign]

You are welcome, I am happy this video helped you, keep watching and sharing, all the best

[@tendayimapawona3237]

Perfect, well explained thank you sir

[@structuralanalysisanddesign]

So nice of you, all the best, keep sharing

[@michaelshongwe9995]

Clear explanations, thanks 🙏

[@surajthapa1059]

thanks sir from nepal

[@structuralanalysisanddesign]

Welcome, keep watching and supporting

[@MasterCivilEngineering]

Awesome video Sir

[@structuralanalysisanddesign]

So nice of you

[@sarfrajahmad2850]

You are fabulous sir

[@structuralanalysisanddesign]

So nice of you, thanks a lot, keep watching and sharing

[@structural_design8001]

It is good practice to provide at least 25 % of the Ast (minimum) and subject to two bars (minimum) at compression side also, even if it is not required,

[@shashank_d_a]

Thank you so much sir. Please make more videos of different methods. ❤️❤️

[@structuralanalysisanddesign]

Welcome, I will try to come up with more videos, keep watching

[@civilexplorer7038]

Sir, In the problem u have taken Fe415 grade but while finding d u took Mu= .133fckbd2 which is for Fe500. As well Mulim comes out to be 94.46kNm

[@adityajoundal8500]

Thanks sir 👌👍

[@armyofficermanishsharma5039]

Happy Navratri sir

[@structuralanalysisanddesign]

Happy Navratri Manish

[@NileshRoamingNITIAN]

Just Amazing 🔥🔥🔥🔥

[@saipraneethasp9847]

Sir, I just watched ur videos for ssc je mains.. tnx for this neat nd clean explanation sir.. Pls start Steel if possible..

[@structuralanalysisanddesign]

Thank you for appreciating my lectures, yes i am starting design of steel structures in a very detailed manner very soon, keep watching and sharing with your friends

[@masoodmomin5296]

Thank you very much sir. What is live load you considered. Is it brick dead load of bricks. Also called as super imposed load

[@structuralanalysisanddesign]

Yes overall live load

[@masoodmomin5296]

@@structuralanalysisanddesign we take live load Max upto 3 kn/m2 on slab. What is that load. Which taken as live load in problem.

[@structuralanalysisanddesign]

Nowhere they had mentioned from where load was coming, its assumed overall load coming on beam say brickwork etc

[@amansah9354]

tq very much sir for this video

[@structuralanalysisanddesign]

So nice of you, all the best, keep watching and supporting

[@adityajoundal8500]

Excellent 👍

[@advselvaa5555]

Superb. Thank you sir.

[@sheetal_baisa]

great efforts.

[@vkchowdary7924]

Thank you sir, will you make video on Continuous slabs.

[@structuralanalysisanddesign]

Sure, your request noted

[@Anuradha135]

Very Nice Video Sir 👍👍

[@structuralanalysisanddesign]

Thank you mam

[@RohitSingh-xb8ic]

How to know whether to use 2 legged stirrups or 4 legged stirrups

[@amiteshsingh8682]

*Sir, can you upload videos of design of steel structure,bolted connection,joints,tension members and compression members?*

[@structuralanalysisanddesign]

Sure soon i will try to upload

[@amosopiyo6403]

Good explanations and can you please upload a video on simply supported slab with cantilever on both sides

[@structuralanalysisanddesign]

Will try to do it, thanks for watching

[@biswasmihir0001]

Thank You Sir. Please give us a design calculation on rcc cantilever slab.

[@yuwabharatshakti3603]

Spacing of sturip remains constant in the middle of the beam or spacing decreases on the fixed portion।plz tell।

[@structuralanalysisanddesign]

As the Shear force will decrease as you we go towards free end, spacing can be increased as you move towards free end, In this problem i have kept same spacing

[@nksconstructionworld2819]

Thanks you sir

[@structuralanalysisanddesign]

welcome, keep watching and supporting

[@manikumar7501]

sir, as the adopted reinforcement is Fe415 , after concluding the section as under reinforced why did you take Mu = 0.133 fck bd2. 0.133 is for Fe500 and for Fe415 we have adopt the formula Mu = 0.138 fck bd2.

[@professor766]

Yaa, taken value of Mulim is wrong

[@vikeshtalda1069]

Sir, while calculating the dead load, why be always multipy it by 25 ?

[@structuralanalysisanddesign]

25KN/m3 is density of concrete, some textbooks take 24, both values you can take

[@sasikumartherayil9620]

Sir Your efforts are good Go for IS Code Minimum mix is M25 for rcc. Now a days 415 steel is not available. Make it more practical by Bring a project in to it. So that the students will understand why it is a cantelever. Why it is starting from column. Tell how the load is coming. Shiw full details then come to the xantelever

[@structuralanalysisanddesign]

Good suggestions, i will try to do it, but M20 is minimum mix for RCC as per IS Code and problem is solved as per IS code only

[@sumeetavhad7849]

Sir please make video on combined footings and structural analysis topic

[@soimhossen3023]

Beautiful

[@vikeshtalda1069]

Also sir, in some cantilever problem, I have seen, the addition of wt of rib, what is the formula for it, and what is rib actually?

[@structuralanalysisanddesign]

Rib comes in T Beam, analysis of T beam is there on this channel, kindly check

[@vikeshtalda1069]

Thank u so much 💓

[@shanimat3003]

Awesome!! Sir.....can u upload the lintel design?

[@structuralanalysisanddesign]

Thank you, your request noted, soon i will try to upload

[@gauravarya2419]

Hi sir, really loving all your videos. Could you please clear one of the practical doubt of the following case. It is for my home site. How do I extend a balcony of 1.2x2.5m of a preconstructed apartment using cantilever beams? It is a third floor. Column size is 9x12 inches. I am going to use 6 top bars of 16 mm and 3 bottom bars of 16mm, curtailing 2 top bars at 0.6m with the main slab bars of 12mm and distribution bars of 10mm. Stirrups bar of 8mm with spacing 4 inches center to center. cover block of 30mm with hook angle 135 degrees and angling downwards. slab thickness at support 6 inches As it is preconstructed apartment, I could not extend the bar back, however I have reclaimed around 0.6m beam and slab bars after demolishing beam and slab. Will this be enough for lapping length of slab and development length of cantilever beam. I plan to create a brick wall (4 inches, 9 feet ceiling height) to include this space inside to be used as a kitchen counter of 2 feet and overhead storage. What modifications I can perform to ensure safety. Total reinforcement area is now 3feet 6 inches cantilever, column(9″x12″), 2feet overlapping length.

[@ARKK-ORGANIZATION]

Sir this problem solved by LIMIT state or WORKING state method?

[@structuralanalysisanddesign]

Limit State Method, in this channel everything will be by limit state method

[@FareedKhan-ec5iy]

First i would say, You are a true gem dear, appreciated your effort and the way you explain things A to Z, really really impressed. Keep this great channel going. My question is what if Tv

[@structuralanalysisanddesign]

Thank you so much for appreciating me and for best wishes to the channel, this kind of motivating words keep me motivated to do videos, keep watching and supporting. To answer your question, if there is no need of shear reinforcement but still we have to provide minimum shear reinforcement in the form of stirrups, kindly refer IS 456-2000 Page 72, clause 40.3

[@FareedKhan-ec5iy]

@@structuralanalysisanddesign Thanks for your answer. Sir will you provide a lecture on deep and hidden beam design if yes then expected time?

[@structuralanalysisanddesign]

I cant guarantee but your request noted

[@brjangid3088]

Is it not necessary to check against overturning moment.

[@emaaduddeen]

sir how did you calculated hanging / bottom bars?

[@structuralanalysisanddesign]

That is just nominal we can provide

[@ianballesteros6815]

If Nominal Shear stress is bigger, does it mean Shear Design is not required? Do I still need to provide stirrups? And what will be the spacing if ever?

[@chukwuagoziefavour812]

Sir pls which of the authority code are you using?

[@arnabsikder5917]

it is limit state or working state

[@alfavarghese1242]

Can you explain more about negative moment and positive moment

[@structuralanalysisanddesign]

That comes in continuous beam, soon i will try to upload it

[@alfavarghese1242]

@@structuralanalysisanddesign awaiting for that video

[@nepalitechnocrats5168]

How much % of main steel we should provide on bottom side (hanger bars)?

[@yangchinlhamu210]

Sir, the same problem in BC Punmai book ,they are not calculating effective span and have directly taken given length. Sir can you tell in cantilever problems excluding the given clear span problem, where we should calculate effective span and where not ?

[@structuralanalysisanddesign]

Simply supported beam its necessary

[@theexecutioner3510]

Sir which bool did you refer for studying design of cantilever beam. Jain? Should I commit this solution?. Pls rply sir.

[@darshancalldarshu6413]

Bro you can upload estimation long wall and short wall method and centre line method

[@structuralanalysisanddesign]

Already uploaded, kindly watch ir

[@NehaNaaz-o6j]

Now a days using Fe 500,550 Expecting design of rectangular footing on this subject

[@yangchinlhamu210]

Sir in some books b=0.5 D (overall depth) . And you are solving by b=0.5d (effective depth). Is it okay to use both ?

[@structuralanalysisanddesign]

As far as it is safe than there is absolutely no problem

[@newera5773]

Hello Sir!! Your explanation skills are outstanding. These are on the great videos of RCC design sir at 25:49 we use 2nd formula of tv am I right or wrong.

[@samcivil9772]

Sir if point load@end then how it is design

[@shyamsundaryadav8752]

Sir, magnel method samjhadijyae naa

[@nilakanthapanda4278]

Deflection ?

[@vijaybhasker2928]

sir please make a video about design dog-legged rcc stair cases

[@sumanbarat2281]

I think d check is 0.138b D2 fck in place of 0.133 for fe415

[@opendicharles3127]

can u also us how to do the curtailment. and also how to design to eurocode2

[@AnkitMaurya-gs2po]

Plz explain how will be b = 2d/3....🙏🙏🙏🙏

[@affu2104]

In all problems u have not solved for check for development length..... Is it necessary to check or not..?? Plz reply

[@yogeshnegi1090]

same question

[@gujjugamer7585]

Which method is this WSM OR LSM

[@structuralanalysisanddesign]

Limit state method (LSM)

[@akashmadar3396]

What is nominal shear stress

[@praveencivilengineer]

Bro can u design the cantliver T beam..... With 6ft from wlla

[@chrisk8z]

may i know what lvs stands for? ty

[@structuralanalysisanddesign]

LVS - Legged Vertical Stirrups

[@Alpha_Dad]

Sir, why have you not considered tapering the section and curtailment of steel?

[@yogeshnegi1090]

same question

[@Leo_Rocky_Rolex]

Sir what to do if design moment exceeds limiting moment??

[@shashank_d_a]

Sir please upload tapered cantilever problem

[@DineshKumar-kd2nn]

In case of fe550 checking for deflection It's k=0.6 L/d Max for cantilever is 7 xk=4.2 Provided is 3000/450=6.667 It's failing In deflection What should I do

[@oscarvaron4384]

What Sizes support??

[@onlineteacher9171]

Sir, From Which Book is page 37???

[@structuralanalysisanddesign]

Its IS 456-2000 Code for RCC

[@bimalkachhap9750]

Pl post the detail calculation sheet paper of design for RCC. cantilever beam, simply supported beam, overhanging beam.

[@sathiyaprakash6382]

Where we have implemented design widh

[@faizanuddin9272]

Sir you didn't divide shear force by 2 Why ?

[@atharavupare6479]

why the first stirrup inside the column?

[@MushtaqAhmad-ro9qm]

Sir we have to design a beam of jib crane,plz sir if u cooperate with us , tomorrow we have a presentation about that....I will tell u about the required values etc

[@aquibmohd]

20:16 how to get this formula ?

[@shadabanwar6199]

Sir please upload numerical on shear and bond and also design of doubly reinforced beam as soon as possible please sir it's humble request

[@structuralanalysisanddesign]

Next video i will put on design of Doubly Reinforced Beam

[@structuralanalysisanddesign]

Design of Doubly Reinforced Beam Uploaded, kindly check

[@gauravarya2419]

@@structuralanalysisanddesign how do you get to this formula to calculate ast in step 5,

[@structuralanalysisanddesign]

@@gauravarya2419 Its based on derivations, you can find this formula in many standard text books

[@BeardMan1.]

Can you change the clickpad 😊

[@sarttfft]

I am going to make 5 ft length of cantilever beam. Size of column = 10'' x12". Any suggestions on placing of reinforcement, developmental length and hidden beam?..

[@structuralanalysisanddesign]

I strictly suggest you to consult your local structural engineer

[@sarttfft]

@@structuralanalysisanddesign if you dont mind, can you able to help me somewhere or the other way?

[@rakshithvenkatesh9870]

Hello Sir!! Your explanation skills are outstanding.. Thank u for such a neat/ detailed teaching.. huge respect! I just had one doubt sir.. at 40:09 u have taken the value as 1.6.. ( during the calculation of development length) , but i got the value as 1.92, can u please explain that step? Once again, Thank u soo much for such an outstanding lecture!!

[@MissJYL0w]

Yah me too..i'm wondering how he get 1.6..i also got 1.92

[@petraalbatra9898]

Actually the total value after multiplying 1.2 and 1.6 comes out to be 1.92. so the value coming out is same. I was also a lil bit confused at that point.

[@civilengineering953]

For HYSD bars we additional 60% i.e 1.6 ×1.2=1.92

[@yuwabharatshakti3603]

Why you have not cheak the development length that is come from 26.2.1to26.2.3.3c।plz tell sir।

[@structuralanalysisanddesign]

I have done with 26.2.1 clause only, kindly check it

[@petermapp5988]

I love ALL...OF YOUR VIDEOS.As a do it yourselfer...without civil engineering background...in a world with persons who construct without civil enginerring and THE KNOWLEDGE from your channel...why when i talk..and can explain WHY...the changes must be made..the foreman gives me...THE EVIL EYE

[@bhushankatore5868]

Curtailment of bars are not provided

[@sprasanna1979]

PLS CORRECT MU LIMITING FOR 415 is 0.138 not 0.133

[@somnathmukherjee5794]

Please upload a file of equal combined footing design.

[@vanand9888]

Coad book 📚 explanchai sir

[@srushtissathish3808]

👍

[@chandanraj7095]

Shear ke calculation me clear span lete hai

[@prof.pravinspatil1727]

kzbin.info/www/bejne/rYrClaN5rrR-aZY, refer this one

[@saurabhrajputs]

U explained very well but there is 2 mistake one is major and one is minor 1) U took 0.133(Fe500) instead of 0.138(Fe415) 2) U didn't mention of clear cover and effective cover. PS: Plz do not get offend.

[@structuralanalysisanddesign]

Thank you for telling the mistake yes its 0.138 i agree, i will put this correction in description box with timings, this is the first i made a mistake in my video and thanks again for letting me know, and as far as possible one can take minimum effective cover. Keep watching and keep sharing

[@sushilsawant6688]

😢

[@multicolor10]

Interesante presentación profesor. Solo intento aportar un vídeo dejo link sobre algunos aspectos. kzbin.info/www/bejne/nXq1o4aMicSrgrs

[@gnaneshpramanik5982]

Lintel design

[@prof.pravinspatil1727]

kzbin.info/www/bejne/bp-ag6CFop6faLs, refer this one

[@adityatendulkar1130]

This is wrong

[@yogeshnegi1090]

But why? Aditya bhai